Introduction
This manual provides detailed instructions for the Stax Guitar Harmonizer Pedal, a versatile digital effect pedal designed for electric guitar and bass. It features harmonic, pitch shifting, and detune effects with true bypass functionality. Please read this manual thoroughly to ensure proper use and to get the most out of your new pedal.
Setup
Follow these steps to set up your Stax Guitar Harmonizer Pedal:
- Power Connection: The Stax Harmonizer Pedal requires a 9V DC power adapter with a center-minus plug. Connect the adapter to the DC9V input jack on the pedal.
- Instrument Connection: Connect your instrument (electric guitar or bass) to the 1/4” monaural input jack on the side of the pedal.
- Amplifier/Output Connection: Connect your amplifier or the next pedal in your effects chain to the 1/4” monaural output jack on the opposite side of the pedal.
Operating Instructions
The Stax Harmonizer Pedal offers three distinct effects modes controlled by a 3-way toggle switch, along with Dry, Wet, and Range knobs for fine-tuning.
Controls:
- DRY Knob: Adjusts the volume level of your original, unprocessed instrument signal.
- WET Knob: Adjusts the volume level of the effect (harmonized, shifted, or detuned) signal.
- RANGE Knob: This knob's function varies depending on the selected mode:
- In Harmony and Pitch Shift modes, it selects the pitch interval.
- In Detune mode, it adjusts the detune amount.
- 3-way Toggle Switch (UP/DETUNE/DOWN): Selects the desired effect mode:
- UP: Activates Pitch Shift mode. Outputs a precise polyphonic pitch shifting voice.
- DETUNE: Activates Detune mode. It slightly shifts the pitch and mixes it back with the original signal to create a chorus-like effect, ringing with a nice spacious feeling.
- DOWN: Activates Harmony mode. It shifts the pitch and mixes it back with the original signal to create a rich harmonic voice.
- Footswitch: Engages or disengages the effect. This pedal features True Bypass, meaning your instrument's signal passes through unaffected when the pedal is disengaged.
Demonstration Video:
Maintenance
To ensure the longevity and optimal performance of your Stax Harmonizer Pedal, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Storage: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Power: Disconnect the power supply when the pedal is not in use for extended periods to prevent battery drain (if applicable) and prolong component life.
- Handling: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts.
Troubleshooting
If you encounter any issues with your Stax Guitar Harmonizer Pedal, please refer to the following common troubleshooting tips:
- No Power/No Indicator Light:
- Ensure the 9V DC power adapter is securely connected to the pedal and a working power outlet.
- Verify that the power adapter is a center-minus type, as specified.
- Test the power adapter with another compatible device to confirm it is functioning correctly.
- No Sound Output:
- Check all instrument cables. Ensure they are securely plugged into the input and output jacks of the pedal, and into your instrument and amplifier.
- Bypass the pedal (turn it off) to see if sound passes through. If sound passes in bypass mode but not when engaged, the issue might be with the effect circuit.
- Ensure the DRY and WET knobs are not set to zero.
- Unexpected Effect/Sound:
- Verify the settings of the DRY, WET, and RANGE knobs.
- Check the position of the 3-way toggle switch to ensure the desired effect mode (UP, DETUNE, or DOWN) is selected.
- Ensure your instrument's output is not clipping the pedal's input.
If the problem persists after trying these steps, please contact customer support or a qualified technician.
Specifications
| Feature | Detail |
|---|---|
| Model Number | HM-3807 harmonic |
| Type | Effects Pedal (Harmonizer) |
| Input | 1/4” monaural jack (impedance: 470k Ohms) |
| Output | 1/4” monaural jack (impedance: 100 Ohms) |
| Power Supply | 9V DC adapter (center minus plug) |
| Current Draw | 128 mA |
| Dimensions | 95mm (D) x 45mm (W) x 53mm (H) |
| Weight | 200g (product only), 278g (with box) |
| DSP | 32 bit floating point |
| Sampling | 44.1kHz/ 24bit |
| Control Type | Knob, Pedal |
| Hardware Interface | AUX |
| Audio Output Effects | Pitch shifter |
| Effect Modes | Harmony, Pitch Shift, Detune |
User Tips
Here are some tips to enhance your experience with the Stax Guitar Harmonizer Pedal:
- Blend Control: Experiment with the DRY and WET knobs to find the perfect blend of your original signal and the effect. A subtle blend can add depth, while a higher wet setting can create more dramatic pitch effects.
- Range Exploration: The RANGE knob offers a wide spectrum of pitch intervals. Take time to explore different settings in each mode to discover unique sounds.
- Creative Detune: The Detune mode is excellent for creating a rich, spacious, chorus-like sound. Try it with clean tones for shimmering textures or with distorted tones for a thicker, more complex sound.
- Power Supply: Always use a regulated 9V DC center-minus power supply to avoid damage to the pedal and ensure consistent performance.
Warranty and Support
For warranty information or technical support regarding your Stax Guitar Harmonizer Pedal, please refer to the manufacturer's official website or contact your authorized retailer. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.