1. Introduction
This manual provides essential information for the safe and effective use of your Kids Power Ride-On Car Remote Control and Receiver Accessories. Please read this manual thoroughly before installation and operation. These accessories are designed for specific children's riding toys and are not universal. Ensure the purchased part matches your original component.
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always supervise children when operating ride-on cars.
- Ensure all connections are secure before use.
- Do not expose electronic components to water or extreme temperatures.
- Only use batteries of the specified type and voltage.
- Keep small parts away from young children to prevent choking hazards.
3. Product Overview
This product line includes various remote controls and receiver modules designed for different Kids Power Ride-On Car models. Below is an overview of the common components.
Receiver Modules:
- HY2025RX-SE-12V: A 12V receiver module.
- HY2005RX-HL-24V: A 24V receiver module.
- HY2005RX-24V/40A: A 24V receiver module with a maximum load current of 40A.
- HY2005M-HL-24V: A 24V motor controller module that does NOT include remote control functionality.
- White JR 2.4G Bluetooth Remote Control
- Black JR 2.4G Bluetooth Remote Control
Remote Controls:
Two common JR 2.4G Bluetooth remote control designs are available:
4. Specifications
| Attribute | Value |
|---|---|
| Model Numbers | HY2005RX-SE-12V, HY2005RX-HL-24V, HY2005RX-24V/40A, HY2005M-HL-24V |
| Material | Plastic |
| Features | Ride On |
| Recommended Age | 3-6Y, 6-12Y, 12+y, 14+y |
| Certification | CE, FCC |
| Supply Voltage | DC 12V (for 12V models), DC 24V (for 24V models) |
| Load Current | Max 40A |
| Frequency (Remote Control) | 2.407GHz-2.473GHz |
| Package Dimensions (approx.) | Length: 16cm, Width: 15cm, Height: 9cm |
| Package Weight (approx.) | 0.26 kg |
5. Setup Instructions
5.1. Remote Control Battery Installation
- Locate the battery compartment on the back of the remote control.
- Using a screwdriver, loosen the screw to open the battery cover.
- Insert two AAA (1.5V) batteries, ensuring correct polarity.
- Close the battery cover and tighten the screw.
5.2. Pairing the Remote Control with the Receiver
For first use or after replacing batteries, the remote control needs to be paired with the receiver:
- Ensure the ride-on car is powered off.
- Insert the batteries into the remote control (if not already done).
- Press and hold the 'Code' button (or equivalent pairing button) on the remote control.
- While holding the 'Code' button, power on the ride-on car.
- The remote control's indicator light should flash and then become solid, indicating successful pairing.
- Release the 'Code' button.
If pairing fails, power off both the car and remote, then repeat the steps.
5.3. Receiver Module Installation
The receiver module should be installed in the designated compartment within the ride-on car. Ensure all wiring connections (steering motor, drive motors, power supply) are correctly matched and securely plugged into the receiver. Refer to your specific ride-on car's wiring diagram for precise connection points.
6. Operating Instructions
Once the remote control and receiver are properly set up and paired, you can operate the ride-on car using the remote control.
6.1. Remote Control Functions
Refer to Figure 8 for button layout and functions:
- Forward: Moves the car forward.
- Speed: Adjusts the speed setting (typically multiple levels).
- Back: Moves the car backward.
- Stop: Stops the car (emergency brake function).
- Right: Turns the car right.
- Left: Turns the car left.
- Code: Used for pairing the remote control with the receiver.
- Speed Indicator: Shows the current speed setting.
6.2. Emergency Braking Function
The remote control features an emergency braking function. Pressing the 'Stop' button will immediately halt the ride-on car, providing an important safety feature.
6.3. Models Without Remote Control Function
Please note that the HY2005M-HL-24V module does not support remote control functionality. This module is a motor controller only.
7. Maintenance
- Cleaning: Wipe the remote control and receiver modules with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Replacement: Replace remote control batteries when the indicator light dims or operation becomes erratic. Always use fresh AAA (1.5V) batteries.
- Storage: Store the remote control and receiver in a dry place, away from direct sunlight and extreme temperatures, when not in use. Remove batteries from the remote control if storing for extended periods.
- Connection Check: Periodically check all wiring connections to the receiver module to ensure they are secure and free from corrosion or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not responding | Low or dead batteries in remote; Not paired; Out of range | Replace batteries; Re-pair the remote; Move closer to the car. |
| Car not moving | Car power off; Loose wiring connections; Receiver malfunction | Ensure car is on; Check all wiring to receiver; Contact support if receiver is faulty. |
| Intermittent control | Weak remote batteries; Interference; Loose connections | Replace batteries; Move away from other 2.4G devices; Check wiring. |
| HY2005M-HL-24V not responding to remote | This module does not support remote control. | This is expected behavior. The HY2005M-HL-24V is a motor controller only. |
9. User Tips
- Always verify the model number of your existing receiver before purchasing a replacement to ensure compatibility.
- When replacing a receiver, take a photo of the original wiring connections before disconnecting to aid in reassembly.
- For optimal performance, use high-quality alkaline batteries in the remote control.
- If your ride-on car supports APP control, ensure your smartphone's Bluetooth is enabled and the correct app is installed and updated.
10. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.
