OPUYYM Smart Watch User Manual

1. Product Overview

The OPUYYM Smart Watch is a versatile fitness tracker and smartwatch designed for both men and women, offering a range of health monitoring and smart features. It comes in a variety of macaron colors and is compatible with Android and iOS devices.

2. Setup

2.1 Package Contents

• Smart Watch Host
• Wrist Strap
• Charging Cable (USB Quick Removal Direct Charge)
• User Manual
• Retail Box

2.2 Wearing the Watch

For accurate readings, wear the watch properly:

1. The watch is best worn after the ulnar styloid (wrist bone).
2. Adjust the wrist strap size using the adjustment holes and buckle.
3. Ensure the sensor is close to the skin to avoid movement during activities.

2.3 Charging the Watch

For the first use, ensure the battery has sufficient power. If the device does not turn on, connect it to a charger. The watch features a USB Quick Removal Direct Charge design, meaning the wristband can be detached to reveal a USB interface for direct charging. No separate charger is included.

2.4 App Installation and Device Connection

To use all smart features, install the companion app on your phone:

1. Scan the QR code provided in the user manual (or search 'FitPro' in your app store) to download and install the 'FitPro' app.
2. **System Requirements:** Android 5.0 or above; iOS 9.0 or above; Bluetooth 4.0 support.
3. For Android users: Always authorize access to the phone for the APP and keep the APP open. Enable GPS on your phone before connection.
4. Open the 'FitPro' app and click to start scanning for devices.
5. Select your watch from the list to pair.
6. After successful pairing, the app will automatically save the watch's Bluetooth address and connect automatically when opened or running in the background.

3. Operating Instructions

3.1 Basic Watch Functions

• Power On: Touch and hold the function button for more than 3 seconds.
• Power Off: In the Bluetooth address interface, press and hold for 2 seconds to turn off. A short press will exit the shutdown page.
• Screen On/Off: Under power-on state, short press the function key to light up the screen. The screen automatically turns off after five seconds of no operation.
• Navigation: From the default clock page, short press the function key to switch between different pages.

3.2 Clock Interface

After syncing with your phone, the watch will automatically calibrate the time. Press and hold the standby interface for 2 seconds to switch between 24/12 hour clock interfaces.

3.3 Activity Tracking

• Steps: Records the number of daily movement steps.
• Distance: Estimates motion distance based on steps.
• Calories: Estimates calories burned based on steps.

3.4 Health Monitoring

The watch supports heart rate, blood pressure, and blood oxygen monitoring. After entering the respective test interface, the current results will be displayed after a few seconds. This feature requires the watch to support the necessary sensors.

3.5 Multi-Sport Mode

The watch offers various sport modes:

• Running Mode: Records calories and duration of running.
• Skipping Rope Mode: Records calories and duration of rope skipping.
• Sit-up Mode: Records calories and duration of sit-ups.

3.6 Sleep Monitoring

When you fall asleep, the watch automatically enters sleep monitoring mode, detecting deep sleep, shallow sleep, and wake-up times to calculate sleep quality. Sleep data is only viewable in the app. Sleep detection starts at 10 PM, and 3-4 hours of sleep data will be synchronized to the app.

3.7 Information Mode

The watch pushes various reminder messages. Enter this interface to view the last 3 message records.

3.8 App Functions and Settings (FitPro)

• Personal Information: Set your gender, age, height, weight, and daily step goal in the app.
• Application Push:
  • Incoming Call: If enabled, the watch vibrates and displays the caller's name/number (requires app permission to read contacts).
  • SMS Notification: If enabled, the watch vibrates for text messages.
  • Other Reminders: For messages from WeChat, QQ, Facebook, etc., the watch vibrates and displays content (requires app permission for system notifications; watch displays 20-40 words).
• Other Functions:
  • Vibration: Turn on/off vibration for calls, messages, and other reminders.
  • Alarm Setting: Set up to 8 alarms, which synchronize to the watch and work offline.
  • Looking for a Watch: In the connected state, tap this option in the app to make the watch vibrate.
  • Remote Photography: Enter the remote camera interface from the watch or app. Shake/turn wrist/touch watch to take a photo after a 3-second countdown (requires app access to photo album).
  • Sedentary Reminder: Set an interval for reminders if you sit for too long.
  • Raise Hand to Brighten: Lift your wrist and turn the screen towards you to light it up.
  • Do Not Disturb Mode: Set a time period during which the watch stops receiving notifications.

4. Maintenance

4.1 General Care

• The watch is only life waterproof. Do not wear it while bathing or swimming.
• Avoid exposing the watch to high moisture, high temperatures, or very low temperatures for extended periods.
• Clean the watch regularly with a soft, dry cloth.

4.2 Charging Precautions

• Always use the included charging cable (USB Quick Removal Direct Charge) or a compatible USB power source.
• Ensure the charging contacts are clean and dry before charging.

5. Troubleshooting

• Watch crashes or restarts: Check your phone's memory. Exit and reopen the app, or clear app data and try again.
• App connection issues: Ensure Bluetooth is enabled on your phone and the 'FitPro' app has all necessary permissions (especially for Android, keep app running in background and enable GPS).
• Charging issues: Verify the USB connection is secure. Remember, no separate charger is included; the wristband detaches for direct USB charging.
• Notifications not showing: Ensure the 'FitPro' app is running in the background and has permissions to access notifications and contacts. Check that 'Application Push' is enabled in the app settings.
• Time synchronization: Ensure the watch is successfully connected to the 'FitPro' app; time calibration is automatic upon connection.
• Device Reset: If issues persist, use the 'Device Reset' function in the app or on the watch to clear all data and restart.
• Remove Device: To completely disconnect and erase data, use the 'Remove Device' function in the app.

6. Specifications

7. User Tips

• App Permissions: For Android users, always ensure the 'FitPro' app has all necessary permissions (background running, contact reading, GPS enabled) to function correctly and receive notifications.
• Charging: Remember the watch uses a USB Quick Removal Direct Charge method. Detach the wristband to expose the USB plug. No separate charging brick is included.
• Water Resistance: The watch is 'Life Waterproof' only. This means it can withstand splashes or brief exposure to water, but it is NOT suitable for swimming, showering, or prolonged water immersion.
• Health Data: The health monitoring features (heart rate, blood pressure, blood oxygen, sleep) are for general fitness and wellness purposes. They are not intended for medical use and should not be used as a substitute for professional medical equipment or advice.
• Watch Faces: Customize your watch face through the 'FitPro' app for a personalized experience.

8. Support

For further assistance or specific inquiries not covered in this manual, please refer to the official user manual PDF available at this link or contact the seller directly.