PUSR USR-W610

Contents

USR-W610 Wi-Fi Serial Device Server

User Manual

1. Introduction

The PUSR USR-W610 is a versatile device designed to facilitate data communication between serial devices (RS232/RS485) and modern network interfaces (Wi-Fi/Ethernet). It acts as a serial device server, converting serial port data into TCP/IP network data, enabling transparent, bi-directional transmission. This allows traditional serial devices to instantly gain TCP/IP network capabilities, significantly extending their communication range and integration possibilities.

The device supports a wide array of network protocols, including MQTT, TCP, UDP, HTTP, and HTTPS, making it suitable for diverse application scenarios. It also functions as a Modbus Gateway, converting Modbus RTU to Modbus TCP, and supports multi-host polling.

Video: Overview of PUSR W610 and W630 Wi-Fi Serial Servers, highlighting features like routing, bridging, and communication distance.

2. Specifications

2.1. Technical Parameters

ParameterValue
Power SupplyDC: 5.0~36.0 V, Connector: 5.5*2.1 mm & 2-pin terminal block
Working Current170 ~ 350 mA @ 5V
Wi-Fi StandardIEEE 802.11 b/g/n
Frequency Range2.400GHz-2.4835GHz
Wi-Fi SecurityWEP/WPA-PSK/WPA2-PSK
Ethernet Port Number1 x RJ45, WAN/LAN configurable
Ethernet Rate10/100 Mbps, auto MDI/MDX
Ethernet Protection1.5KV electromagnetic isolation
Serial Port TypeRS232/RS485 (not simultaneously)
RS232 ConnectorDB9-male connector
RS485 Connector2-pin terminal block
RS232 Baud Rate300~460.8Kbps
RS485 Baud Rate300~230.4Kbps
Data Bits5, 6, 7, 8
Stop Bit(s)1, 2
Parity BitNone, Even, Odd, Space, Mark
Flow ControlHardware: RTS/CTS(TTL0), Software: XON/XOFF
Operating Temperature-40~85°C
Storage Temperature-40~125°C
Operating/Storage Humidity5%~95% (Non-condensing)
Network ProtocolIP, TCP, UDP, HTTP, HTTPS, MQTT, SSL/TLS, ARP, DHCP
Modbus GatewayModbus TCP/RTU protocol conversion, Multi-host polling: up to 16 hosts
CertificationCE, FCC, RoHS

2.2. Dimensions and Physical Features

Dimensions and Interfaces of USR-W610

Figure: USR-W610 Dimensions and Interface Layout. Dimensions: 86*82.5*25mm. Interfaces include Antenna, Reload button, Ethernet, Power, RS485, and RS232.

  • Dimensions: 86*82.5*25 mm
  • Installation: Wall mounting
  • Reload button: Long press to restore factory settings.
  • Antenna Connector: 1*SMA-Female

2.3. Package Contents

USR-W610 Package Contents

Figure: Contents of the USR-W610 package, including the device, antenna, serial cable, and power adapter.

  • 1x USR-W610 Wi-Fi Serial Device Server
  • 1x Power Supply (5V/1A)
  • 1x Female to Female Serial Cable
  • 1x Wi-Fi Antenna

3. Setup

3.1. Hardware Interface and Indicators

USR-W610 Front View with LED Indicators

Figure: Front view of the USR-W610, showing LED indicators and serial ports.

The USR-W610 features 5 LED indicators to provide status feedback:

  • Power LED: Lights up when the module is successfully powered on.
  • Work LED: Blinks every two seconds when the module is operating normally.
  • Link LED: Lights up after the module establishes a Wi-Fi connection.
  • TXD LED: Blinks when the module sends data from the serial side.
  • RXD LED: Blinks when the module's serial side receives data.

3.2. Initial Hardware Connection

To begin, power on the USR-W610. Connect it to your PC using a USB-to-RS485 or USB-to-RS232 cable, depending on your serial interface requirements.

USR-W610 Hardware Interface Diagram

Figure: Diagram illustrating the hardware interfaces including Power, Ethernet, Antenna, RS232, and RS485 connections.

3.3. Default Parameters

Upon powering on, the USR-W610 broadcasts a Wi-Fi network named USR-W610-xxxx. You can connect to this network via Wi-Fi or directly connect your PC to the USR-W610's LAN port. Once connected, you can access the device's web server for configuration using a web browser.

ParameterDefault Value
SSIDUSR-W610-xxxx
LAN IP10.10.100.254
Usernameadmin
Passwordadmin

To access the configuration page, open a web browser and enter 10.10.100.254 in the URL bar. After entering the default username and password, you will be directed to the configuration interface.

4. Operating Modes and Features

4.1. Networking Applications

The USR-W610 supports various networking modes, allowing flexible deployment in different environments.

USR-W610 Networking Modes

Figure: Diagram illustrating various networking modes including AP, Router, STA, Bridge, and AP+STA.

  • AP Mode: The USR-W610 acts as an Access Point, allowing other Wi-Fi devices (like PCs, tablets, or smartphones) to connect directly to it for data transmission. Serial devices can connect to the W610 via RS232 or RS485.
  • STA Mode: The USR-W610 connects to an existing Wi-Fi Access Point (AP) to communicate with other devices on that network. If the AP is connected to the internet, the W610 can also access the internet.
  • AP+STA Mode: The W610 operates as both an AP and a STA simultaneously. Its STA interface connects to an external AP, while its AP interface allows other STA devices to connect to it.
  • Bridge Mode: In this mode, devices connected to the W610's Ethernet port are effectively on the same network segment as the upstream AP, making the W610 transparent.
  • Router Mode: The W610 obtains an IP address from an upstream AP and then assigns IP addresses to devices connected to its Ethernet port, acting as a second-grade router.

4.2. Data Transfer Modes

The USR-W610 supports several data transfer modes to suit different application requirements.

4.2.1. Transparent Transmission Mode

In this mode, data is transmitted directly between the serial port and the Wi-Fi/Ethernet interface without any modification or analysis by the W610. This simplifies integration by minimizing complexity.

Transparent Transmission Diagram

Figure: Transparent transmission of serial device data to a TCP server via MQTT, UDP, TCP, or HTTP protocols.

4.2.2. Serial Command Mode

When operating as a UDP or TCP client, the W610 allows serial data to be sent to different servers. The data packet sent by the serial device must include the data itself, along with the server's IP address and port information.

Serial Command Mode Diagram

Figure: Data flow in Serial Command Mode, showing a device sending data to the USR-W610, which then routes it to Server A or Server B based on header and payload information.

4.2.3. HTTPD Client Mode

The HTTPD Client mode supports POST, PUT, and GET HTTP request methods. After configuring the HTTP header via AT commands or the web page, the W610 automatically encapsulates serial data into HTTP protocol data and sends it to the designated HTTP server. Data received from the server is directly transmitted to the serial port.

4.2.4. Modbus TCP <=> Modbus RTU Gateway

The W610 supports conversion between Modbus TCP and Modbus RTU protocols. It also offers multi-host polling for up to 16 hosts. Ensure that the network parameters of the module match those of the application software.

4.2.5. MQTT Mode

The W610 supports MQTT (Message Queuing Telemetry Transport) protocol, a lightweight publish/subscribe messaging protocol. This mode is highly configurable, allowing settings for connection parameters, publishing topics, and subscription topics. It also supports SSL encryption for secure data transmission.

4.3. Socket Functionality

The USR-W610 provides two independent sockets, Socket A and Socket B, for flexible network communication:

  • Socket A: Supports TCP Server, TCP Client, UDP Server, and UDP Client modes. As a TCP Server, it can handle up to 24 TCP clients simultaneously.
  • Socket B: Supports TCP Client and UDP Client modes.

In multi-TCP link connection mode, data from TCP clients is forwarded to the serial port one by one. Data from the serial port is copied and sent to each active TCP link.

4.4. UART Configuration

The UART (Universal Asynchronous Receiver/Transmitter) settings can be configured via AT commands or the web interface.

4.4.1. UART Parameters

The default UART parameters are 115200 baud rate, No parity, 8 data bits, and 1 stop bit (115200, N, 8, 1).

4.4.2. UART Free Framing

This feature defines how the module groups incoming serial data into frames. If the time between two consecutive bytes exceeds a set interval (default 10ms), the preceding bytes are considered a complete frame. This interval can be adjusted.

4.4.3. UART Auto-Framing Mode

For fixed-length data frames, this mode allows setting a trigger time and frame length. The W610 will automatically compose data received from the serial port and forward it to the network based on these settings.

4.4.4. Synchronous Baud Rate (RFC2217)

The W610 supports the RFC2217 protocol for synchronous baud rate adjustments, improving transmission accuracy. This can be enabled via AT commands.

  • USR-Link: In AP mode, the W610 opens a UDP port (49000) to receive USR-Link commands. This allows a connected device to query and set the router's SSID and password via UDP commands, after which the W610 restarts and operates in STA mode.
  • USR Cloud: The W610 can connect to the USR Cloud platform (mp.usriot.com) to display serial device data, especially for standard MODBUS RTU data, by establishing a TCP connection.

4.6. Heartbeat Packet Function

This function allows the W610 to send periodic heartbeat packets to the network or serial device. This helps maintain connections with servers and detect abnormal disconnections. The direction (network or serial), data content, and interval of heartbeat packets are configurable.

4.7. Socket Distribution

This feature enables users to send data to specific socket connections. The W610 can package data from the network according to a defined protocol and send it to the designated serial device. Conversely, the MCU can send data packages according to the socket protocol, and the W610 will parse and forward them to the appropriate socket.

5. Maintenance

5.1. Industrial-Grade Reliability Features

Industrial-Grade Protection Features

Figure: Visual representation of the USR-W610's industrial-grade protection features, including ESD, EFT, Surge Protection, Built-in Hardware Watchdog, and wide operating temperature range.

  • EFT Protection: Protects the device from damage caused by instantaneous current interference, such as lightning strikes or power switches.
  • ESD Protection: Prevents electrostatic damage from sources like dust or electric arcs.
  • Watchdog: Features both hardware and software watchdogs to ensure stable and continuous operation without downtime.
  • Wide Operation Temperature: Designed to operate reliably in extreme temperatures, from -40℃ to +85℃.

5.2. Timeout Restart

In transparent transmission mode, the timeout restart function can be enabled. If the W610 loses its Wi-Fi connection or experiences no communication within a set time, the module will automatically restart. This helps maintain system uptime and reliability.

5.3. Timing Restart

This feature allows the module to restart automatically after a specified time interval. This can be useful for scheduled maintenance or to ensure consistent performance over long periods. The restart interval is configurable.

6. Troubleshooting

  • STA Mode Scanning Issues: When AP+STA function is enabled, if the STA port continuously scans for a router without connecting, it can affect the AP port's performance, potentially leading to data loss. If the STA cannot connect to an AP, consider using the AT+STTC=off command to stop STA scanning.
  • IP Address Conflicts in Router Mode: When configuring the W610 in Router mode, ensure that the LAN IP address assigned to the serial server is not on the same network segment as the WAN IP address obtained from the upstream AP. This can cause network conflicts.
  • Socket Distribution Errors: If the MCU sends a data package that does not correspond to the defined socket protocol, the W610 will return an error code and will not send the data to the appointed socket. Refer to the Socket Distribution section in the full PDF manual for specific error codes and their meanings.
  • Restoring Factory Settings: If you forget the configuration parameters or encounter persistent issues, you can restore the device to its factory default settings by long-pressing the 'Reload' button.

7. Support and Contact Information

For further assistance, technical support, or inquiries, please use the following contact details:

  • Manufacturer: Jinan USR IOT Technology Limited
  • Address: Floor 12 and 13, CEIBS Alumni Industrial Building, No. 3 Road of Maolingshan, Lixia District, Jinan, Shandong, China
  • Official Website: https://www.pusr.com
  • Technical Support: http://h.usriot.com/
  • Email: sales@usriot.com
  • Tel: +86-531-88826739
  • Fax: +86-531-88826739-808

A detailed user manual in PDF format is available for download: USR-W610 User Manual (PDF)

© 2023 PUSR IOT Technology Limited. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.