1. Introduction
The Hiroyasu CP-5810 is a robust and reliable commercial-grade UHF walkie talkie designed for clear and efficient communication. Featuring a powerful 7W output, 16 memory channels, and a long-lasting 2200mAh Li-ion battery with convenient Type-C charging, this device is suitable for various professional and recreational uses. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.


2. Package Contents
Please check the box for the following items:
- 1 × HIROYASU CP-5810 UHF Commercial Radio
- 1 × 7.4V 2200mAh Type-C Li-ion Battery Pack
- 1 × Desktop Charger
- 1 × AC Adapter
- 1 × SMA-Female UHF Antenna
- 1 × Belt Clip
- 1 × User Manual
- 1 × Hand Strap
3. Product Overview
Familiarize yourself with the main components of your Hiroyasu CP-5810 walkie talkie.





4. Setup
Follow these steps to prepare your walkie talkie for use.
4.1. Unboxing and Initial Inspection
Upon receiving your Hiroyasu CP-5810, carefully unbox all components and inspect them for any signs of damage. Ensure all items listed in the 'Package Contents' section are present.
4.2. Battery Installation
- Align the battery pack with the battery compartment on the back of the walkie talkie.
- Slide the battery pack upwards until it clicks into place. Ensure it is securely fastened.

4.3. Antenna Attachment
- Locate the SMA-Female UHF Antenna.
- Screw the antenna clockwise into the antenna connector on the top of the walkie talkie until it is finger-tight. Do not overtighten.
4.4. Charging the Battery
Before first use, fully charge the battery. The 2200mAh Li-ion battery features a convenient Type-C charging port directly on the battery, or you can use the provided desktop charger.
- Using Desktop Charger:
- Connect the AC adapter to the desktop charger and plug it into a power outlet.
- Place the walkie talkie (with battery installed) into the charging cradle. The indicator light on the charger will show charging status (typically red for charging, green for fully charged).
- Using Type-C Port (on battery):
- Connect a Type-C USB cable (not included, but compatible with standard Type-C chargers) to the port on the battery pack.
- Connect the other end to a compatible USB power source.

4.5. Attaching Belt Clip and Hand Strap
- Attach the belt clip to the designated slot on the back of the walkie talkie using the provided screws.
- Thread the hand strap through the loop on the top or side of the walkie talkie for added security.
5. Operating Instructions
5.1. Power On/Off and Volume Control
Rotate the top-left knob clockwise to power on the walkie talkie. Continue rotating to adjust the volume. Rotate counter-clockwise until a click is heard to power off the device.
5.2. Channel Selection
Use the top-right knob to select one of the 16 available memory channels. Ensure all radios in your group are set to the same channel for communication.
5.3. Transmitting and Receiving (PTT)
- To transmit, press and hold the Push-to-Talk (PTT) button located on the side of the walkie talkie. Speak clearly into the microphone.
- Release the PTT button to stop transmitting and return to receive mode.
5.4. VOX Handsfree Operation
The VOX (Voice Operated Exchange) function allows for hands-free transmission. When VOX is enabled, the radio will automatically transmit when it detects your voice, without needing to press the PTT button. Refer to the full user manual for instructions on enabling and adjusting VOX sensitivity.
5.5. FM Commercial Radio
The CP-5810 includes an FM commercial radio function. This allows you to listen to FM radio broadcasts. Consult the full user manual for details on how to activate and tune the FM radio.
5.6. High/Low Power Selection
The walkie talkie supports both high (7W) and low (4W) output power settings. High power provides maximum range but consumes more battery. Low power conserves battery life and is suitable for shorter distances. This setting can typically be programmed or accessed via a function button.
5.7. Wide/Narrow Band Selection
The device supports wide and narrow band operation. Narrow band can help reduce interference in crowded frequency environments. This setting is usually programmable.
5.8. Channel Scan
The channel scan feature allows the radio to automatically scan through programmed channels to find active transmissions. Refer to the full user manual for activation and customization of scanning.
5.9. Squelch Level
The squelch function mutes the speaker when no signal is present, eliminating background noise. The CP-5810 offers 0-9 squelch levels. A higher level requires a stronger signal to open the squelch. Adjust this setting to balance between receiving weak signals and avoiding noise.
5.10. CTCSS/DCS Sub-tones
CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digitally Coded Squelch) sub-tones are used to filter out unwanted conversations on a shared channel. When a sub-tone is set, your radio will only receive transmissions from other radios using the same sub-tone. The CP-5810 supports 50 CTCSS groups and 210 DCS groups.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's surface. Do not use harsh chemicals or solvents.
- Battery Care: To prolong battery life, avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use.
- Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna, as this can damage the transmitter.
- Storage: Store the walkie talkie in a dry, dust-free environment away from extreme temperatures.
7. Troubleshooting
- No Power: Check if the battery is properly installed and charged. Ensure the power/volume knob is turned on.
- Cannot Transmit or Receive: Verify that the radio is on the correct channel and that the battery is charged. Check antenna connection. Ensure squelch level is not set too high.
- Poor Audio Quality: Check volume level. Ensure antenna is properly connected. Move to an area with fewer obstructions.
- Short Range: Ensure you are using the high power setting if needed. Check for obstructions like buildings or terrain.
8. Specifications
The following table details the technical specifications of the Hiroyasu CP-5810 walkie talkie.

| Category | Specification |
|---|---|
| Frequency Range | UHF 400-520MHz |
| Memory Channel | 16 Groups |
| Operation Voltage | DC7.4V±10% |
| Battery Capacity | 2200mAh (Li-ion) |
| Frequency Stability | ±2.5ppm |
| Operating Temperature | -20°C to +50°C |
| Mode of Operation | Simplex |
| Antenna Impedance | 50ohm |
| Dimensions (Antenna Excluded) | 150(L)×65(W)×40(H)mm |
| Net Weight (Antenna & Clip Included) | 350g |
| RF Output Power | Approx. 7W (High) / Approx. 4W (Low) |
| FM Modulation | 16KΦF3E / 11KΦF3E |
| Maximum Deviation (W/N) | ≤5KHz / ≤2.5KHz |
| Spurious Emission | ≤7.5uW |
| Adjacent Channel Power | ≤-65dB / ≤-60dB SNR |
| QT/DQT (W/N) | 0.7±0.1KHz / 0.4±0.0KHz |
| Modulation Sensitivity | 8-12mV |
| Transmission Current | ≤1.7A |
| Receive Sensitivity | -122dBm (12dB SINAD) |
| Adjacent Channel Selectivity (W/N) | ≥65dB / ≥60dB |
| Inter Modulation and Rejection | ≥65dB / ≥60dB |
| Clutter Suppression | ≥-65dB |
| Rated Audio Power Output | 1W (8R Load) |
| Receive Current | ≤380mA |
| Rated Audio Distortion | ≤10% |
Note: All specifications are subject to change without prior notice or liability.
9. User Tips
- Range Optimization: For best range, ensure a clear line of sight between radios. Obstacles like buildings, dense foliage, and terrain can significantly reduce communication distance.
- Battery Life: To maximize battery life, use the low power setting when communicating over short distances. Enable the 'Battery Save' feature if available in the radio's programming.
- Clear Communication: Always speak clearly and concisely into the microphone. Wait for a brief pause after pressing the PTT button before speaking to ensure the beginning of your message is not cut off.
- Privacy: While CTCSS/DCS sub-tones help filter unwanted conversations, they do not provide true privacy. Your conversations can still be heard by others on the same main channel without a sub-tone.
10. Warranty and Support
Your Hiroyasu CP-5810 walkie talkie comes with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Hiroyasu support channels. Keep your proof of purchase for warranty claims.