Safety Information
- Please compare the size with your old model before purchasing to avoid inappropriate sizes.
- If you have no installation experience, please go to a local bicycle repair shop and let professionals help you install it.
Product Overview
This manual provides instructions for the SHIMANO Altus SL-M315/M310 series MTB shifters and RD M310/M360 series rear derailleurs, designed for mountain and hybrid bicycles with 3x7 or 3x8 speed configurations.
Key Features:
- RAPIDFIRE PLUS Shifting: Allows riders to downshift three gears in one stroke for quick and efficient gear changes.
- Light Shifting Operation: Ensures smooth and effortless gear transitions.
- Wider Compatibility: Designed for broad compatibility with various bicycle setups.
- Internal Cable Routing: Suitable for frames with internal cable routing.
- Slim Main Lever Body: Ergonomic design for comfortable use.
- Streamlined Cockpit Experience: Contributes to a clean and efficient handlebar setup.
- Gear Display: Positioned below the handlebar with numbered indicators for easy gear position identification at a glance (Optical Gear Display).
- Wide Link Design (Derailleurs): Provides more accurate shifting and enhanced durability.
- POM Silent Guide Wheel (Derailleurs): Effectively reduces chain friction for smoother operation.
- Alloy Body (Derailleurs): Strong, firm, and resistant to deformation.
Setup and Installation
Proper installation is crucial for optimal performance and safety. It is highly recommended that installation be performed by a qualified bicycle mechanic.
General Installation Notes:
- Shifters (SL-M315 series): These shifters feature a clamp band design for secure attachment to the handlebar. Ensure the clamp is tightened to the manufacturer's recommended torque specifications. The inner cable length for the SL-M315-L (3-speed left shifter) is 1740mm.
Figure 1: Clamp Ring Shift Lever components, showing the shift cable, gear window, and shift key.
- Rear Derailleurs (RD-M310/M360 series): These derailleurs are designed for direct installation. The RD-M360 is compatible with larger gear speeds, specifically 28T to 34T freewheels.
Figure 2: RD-M360 Rear Derailleur highlighting direct installation and compatibility with 28/34T gear speeds.
Figure 3: RD-M310 Rear Derailleur emphasizing its wide link design for accurate shifting and durability.
- Ensure all cables are properly routed and tensioned according to standard bicycle maintenance practices.
For detailed, step-by-step installation instructions, please refer to the official user manual PDF: SHIMANO Product User Manual (PDF).
Operating Instructions
Shifter Operation (SL-M315 series):
The SL-M315 shifters utilize the RAPIDFIRE PLUS system for intuitive gear changes.
- Upshifting: Use the larger lever (typically operated by the thumb) to shift to a higher gear.
- Downshifting: Use the smaller lever (typically operated by the index finger) to shift to a lower gear. The RAPIDFIRE PLUS feature allows for downshifting up to three gears in a single stroke.
- Gear Indication: The optical gear display, located below the handlebar, shows the current gear position with clear numbering.
Watch the video below for a demonstration of the shifter's operation:
Video 1: Demonstration of SHIMANO SL-M315 shifter operation, showing gear changes.
Derailleur Operation (RD-M310/M360 series):
The rear derailleur works in conjunction with the shifter to move the chain across the rear cassette, changing gears. Ensure smooth and consistent pedaling while shifting to prevent chain drops or damage.
Maintenance
Regular maintenance will prolong the life and ensure the smooth operation of your SHIMANO components.
- Cleaning: Regularly clean the shifters, derailleurs, and chain with appropriate bicycle cleaning solutions. Remove any dirt, grime, or old lubricant.
- Lubrication: Apply a suitable bicycle chain lubricant to the chain and pivot points of the derailleurs. Avoid over-lubrication, which can attract dirt.
- Cable Inspection: Periodically check shift cables for fraying, rust, or kinks. Replace damaged cables promptly to maintain crisp shifting.
- Adjustment: Over time, shift cables may stretch, requiring minor adjustments to the derailleur. Refer to the detailed PDF manual for adjustment procedures.
- Pulley Wheels: Inspect the derailleur's pulley wheels (15T and 13T on the RD-M310/M360) for wear and tear. Replace if worn to ensure smooth chain movement and reduce friction.
Figure 4: Rear Derailleur highlighting the POM silent guide wheel and its 15T and 13T pulleys.
Troubleshooting
If you experience issues with your shifting system, consider the following common problems and solutions:
- Difficulty Shifting:
- Check cable tension. Too loose or too tight can affect shifting.
- Ensure cables are clean and lubricated.
- Inspect the derailleur hanger for bends or damage.
- Chain Skipping/Jumping:
- Check for worn chain, cassette, or derailleur pulleys.
- Verify proper derailleur adjustment (limit screws and B-tension).
- Noisy Operation:
- Ensure all components are clean and adequately lubricated.
- Check for proper alignment of the derailleur and chain.
For advanced troubleshooting or if problems persist, consult a professional bicycle mechanic.
Specifications
SHIMANO SL-M315 Shifters:
| Attribute | SL-M315-L (Left) | SL-M315-7R (Right) | SL-M315-8R (Right) |
|---|---|---|---|
| Model Number | SL-M315-L | SL-M315-7R | SL-M315-8R |
| Gears | 3 Speed | 7 Speed | 8 Speed |
| Type | RAPIDFIRE PLUS Shift Lever - Clamp Band | ||
| Inner Cable Length | 1740mm | Not specified (typically shorter than left) | Not specified (typically shorter than left) |
| Weight | ~133g | Not specified | Not specified |
SHIMANO Rear Derailleurs:
| Attribute | RD-M310 (Altus) | RD-M360 (Acera) |
|---|---|---|
| Series | ALTUS | ACERA |
| Speed Compatibility | 3x8S (7-Speed compatible) | 3x8S (7-Speed compatible) |
| Max Freewheel Teeth | 34T | 42T |
| Min Freewheel Teeth | 11T | Not specified |
| Material | Aluminum alloy body, Resin pulley | Aluminum alloy body, Resin pulley |
| Weight | ~313g | ~306g |
| Application | MTB/FOLDING BIKE | |
User Tips
- Always shift gears while pedaling to ensure smooth transitions and prevent damage to the drivetrain.
- Avoid cross-chaining (e.g., using the largest front chainring with the largest rear cog, or smallest front with smallest rear) as this can cause excessive wear and inefficient pedaling.
- Listen to your bike. Unusual noises during shifting often indicate a need for adjustment or maintenance.
- Keep your components clean, especially after riding in muddy or wet conditions, to prevent premature wear.
Warranty and Support
For any warranty claims, technical support, or further assistance, please contact the seller or the official SHIMANO service center. Keep your proof of purchase for warranty purposes.