Introduction
Thank you for choosing the NEWBOLER LIG127 Bicycle Front Light. This high-performance light is designed to enhance your cycling safety and visibility with its powerful illumination, long-lasting battery, and versatile features. It can also function as a portable power bank for your electronic devices. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.
Safety Information
- Do Not Stare Directly into Light: The light is extremely bright. Avoid looking directly into the beam to prevent temporary vision impairment.
- Heat Warning: The light may become hot during prolonged use, especially on high brightness settings or when used as a handheld flashlight. Exercise caution to avoid burns.
- Water Resistance: The light is rated IPX6 waterproof, meaning it is protected against powerful water jets. However, it is not designed for submersion. Avoid prolonged exposure to heavy rain or direct water spray.
- Children: Keep out of reach of children.
- Battery Safety: Do not attempt to disassemble or replace the built-in battery. Dispose of the product responsibly according to local regulations.
Package Contents
Please check the box for the following items:

Image: Contents of the NEWBOLER LIG127 Bicycle Light package.
- 1 x NEWBOLER LIG127 Bicycle Light
- 1 x 360-Degree Rotation Holder
- 1 x USB Charging Cable (0.5m)
- 1 x User Manual
- 1 x Colour Box
Product Overview
The NEWBOLER LIG127 features 8 XML-T8 LEDs for powerful illumination, a large capacity battery, and a robust aluminum alloy casing. It serves as a bicycle headlight, a handheld flashlight, and a portable power bank.

Image: Front view of the LIG127 Bicycle Light.

Image: Various angles of the LIG127 light and its mounting bracket.
Setup
Mounting the Light
- Attach the 360-degree rotation holder to your bicycle handlebar. The holder is compatible with handlebar diameters between 20mm and 36.5mm.
- Securely fasten the holder using the adjustable strap or screw mechanism until it is firm and stable.
- Slide the bicycle light onto the holder until it clicks into place. Ensure it is firmly seated.
- Adjust the angle of the light to your preferred position using the rotatable holder.

Image: The 360-degree rotatable stand for easy mounting and adjustment.
Operating Instructions
Power On/Off
Long press the ON/OFF button (power symbol) located on the top of the light to turn it on or off.
Switching Lighting Modes
The light offers two sets of modes: 3-mode and 5-mode. You can switch between these sets by long-pressing the ON/OFF button while the light is on.
- 3 Modes: Short press the ON/OFF button to cycle through 100% brightness, 75% brightness, and 50% brightness.
- 5 Modes: Short press the ON/OFF button to cycle through 100% brightness, 75% brightness, 50% brightness, Strobe, and SOS.

Image: Instructions for switching between 3 and 5 lighting modes.
Charging the Bicycle Light
To charge the light, connect the Micro USB cable to the Micro Charging input port (5V/1A) on the side of the light and the other end to a USB power source (e.g., wall adapter, computer USB port).

Image: USB input and output ports with silicone dust plug.
Power Indicator Light
The indicator light provides information on charging status and battery level:
- Charging: The red LED lights up.
- Fully Charged: The green LED lights up.
- Sufficient Power: The green LED is on when the light is powered on.
- Insufficient Power: The red LED lights up when the battery level is below 20%.

Image: Indicator light behavior for charging and power status.
Using as a Power Bank
To charge your phone or other electronic devices, connect them to the USB Output port (5V/1A) on the side of the bicycle light using an appropriate USB cable.

Image: The bicycle light functioning as a power bank to charge a phone.
Maintenance
- Cleaning: Wipe the light with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
- Storage: Store the light in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: For optimal battery life, charge the light regularly, even if not used frequently. Avoid fully discharging the battery for extended periods.
- Dust Plug: Ensure the silicone dust plug for the USB ports is securely closed when not in use to maintain water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light fully. |
| Light does not charge. | Faulty USB cable or power source. | Try a different USB cable or power adapter. Ensure connections are secure. |
| Light gets hot during use. | Normal operation at high brightness. | This is normal. Avoid prolonged direct contact with the light when it is hot. Reduce brightness if discomfort occurs. |
| Light flickers or dims unexpectedly. | Low battery level. | Recharge the light. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | LIG127 (also referred to as KX8-D) |
| LED Type | 8 x XML-T8 LEDs |
| Maximum Lumens | 4800 Lumens |
| Battery Capacity | Built-in 10000mAh (2x 18650 batteries) |
| Input / Output | 5V/1A (Micro USB Input, USB Output) |
| Lighting Modes | 3 or 5 Switchable Modes (High, Mid, Low, Strobe, SOS) |
| Irradiation Distance | Up to 500 meters |
| Waterproof Level | IPX6 (Protected against powerful water jets) |
| Body Material | Aluminum Alloy |
| Dimensions (L x W x H) | 108mm x 45mm x 31.5mm |
| Net Weight | 211g |
| Mounting Placement | Handlebar (20mm-36.5mm diameter) |
| LED Color Temperature | 7500K |
| Work Time | 4.5 - 18 hours (depending on mode) |
| Charge Time | Approximately 5 hours |

Image: Dimensions and specifications overview.
User Tips
- Optimal Visibility: For maximum visibility and safety, ensure the light is angled correctly to illuminate the path ahead without blinding oncoming traffic. The 120° flood light provides wide coverage.
- Power Bank Use: When using the light as a power bank, be mindful of the remaining battery life for your cycling needs. Charging external devices will reduce the light's operational time.
- Flashlight Caution: If using the light as a handheld flashlight on high power, be aware that the unit can get hot. It is recommended to avoid prolonged direct contact with the hot surface.
Warranty & Support
For any questions, technical support, or warranty inquiries regarding your NEWBOLER LIG127 Bicycle Front Light, please contact the seller or refer to the official NEWBOLER website for customer service information. Keep your purchase receipt as proof of purchase.