Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Ebike Alarm System. Designed for electric bicycles, scooters, motorcycles, and tricycles, this system offers enhanced security with remote control functionality. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Setup
Before installation, ensure your vehicle's power is off. Incorrect wiring can damage the alarm system or your vehicle's electrical components. Professional installation is recommended.
Wiring Instructions
Refer to the wiring diagram below for correct connections. The alarm system is designed to integrate with your vehicle's existing electrical system.
- Power Positive (Red Wire): Connect to the vehicle's main positive power supply.
- Power Negative (Black Wire): Connect to the vehicle's main negative power supply or chassis ground.
- Signal (Blue Wire): Connect to the vehicle's signal input, typically for arming/disarming feedback or remote start signal.
- Alarm (Green Wire): Connect to the alarm output, which triggers the siren.
- Ignition Switch (Orange Wire): Connect to the vehicle's ignition switch wire, which provides power when the ignition is on.
Ensure all connections are secure and insulated to prevent short circuits.
Operating Instructions
Your Ebike Alarm System comes with two remote controls for convenient operation.
Remote Control Functions (Typical)
- Lock Button: Press once to arm the alarm system. The vehicle may emit a confirmation sound. Any unauthorized movement or tampering will trigger the alarm.
- Unlock Button: Press once to disarm the alarm system. The vehicle may emit a confirmation sound.
- Lightning Bolt Button (Remote Start/Stop): Depending on the model and vehicle compatibility, this button may allow you to remotely start or stop your vehicle. Consult your vehicle's manual for compatibility.
- Bell/Horn Button (Panic/Vehicle Finder): Press and hold to activate a panic alarm or locate your vehicle in a crowded area.
Familiarize yourself with the specific button functions of your remote controls.
Maintenance
- Keep Dry: The alarm unit and remote controls are electronic devices. Avoid exposure to water or excessive moisture.
- Clean Gently: Use a soft, dry cloth to clean the alarm unit and remotes. Do not use harsh chemicals or abrasive cleaners.
- Check Connections: Periodically inspect wiring connections to ensure they remain secure and free from corrosion.
- Battery Replacement (Remotes): If remote control range decreases or buttons become unresponsive, replace the remote battery (typically a small coin cell battery).
Troubleshooting
- Alarm Not Responding to Remote: Check remote battery. Ensure you are within range. Verify alarm unit has power.
- No Alarm Sound: Check the alarm unit's wiring (green wire) and ensure the siren is properly connected and functional.
- False Alarms: Ensure the alarm unit is mounted securely and not subject to excessive vibrations. Check for loose wiring.
- Vehicle Not Starting Remotely: Confirm your vehicle supports remote start functionality and that the signal wire (blue wire) is correctly connected to the appropriate input on your vehicle's controller.
Specifications
| Feature | Detail |
|---|---|
| Voltage Compatibility | 48V, 60V, 72V, 80V, 96V, 108V, 120V (select appropriate model) |
| Application | Electric Bicycle, Scooter, Motorcycle, Tricycle |
| Control Method | Remote Control (Two switches included) |
| Origin | Mainland China |
| Package Dimensions (approx.) | 10 cm (Length) x 5 cm (Width) x 5 cm (Height) |
| Package Weight (approx.) | 0.3 kg |
User Tips
- Voltage Selection: When choosing your alarm system, select the variant that matches the nominal voltage of your vehicle's battery (e.g., for a 72V system, choose the 72V alarm). The alarm system is designed to handle the typical voltage fluctuations, including the higher voltage when the battery is fully charged (e.g., 84V for a 72V nominal system).
- Remote Pairing: If your remotes ever lose connection or you need to pair new ones, consult the small instruction sheet included in the package or contact support for specific pairing procedures.
- Mounting Location: Mount the alarm unit in a discreet, protected location on your vehicle to prevent tampering and exposure to elements.
Warranty & Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
