Introduction
This manual provides instructions for the safe and effective use of your K&F Concept Carbon Fiber Camera Tripod, model D254C1+BH-28L. Please read this manual thoroughly before operating the product and retain it for future reference.

Image: K&F Concept Carbon Fiber Tripod, showing its compact and extended forms, ball head, and included accessories.
Setup
Package Contents
Before starting, ensure all items are present in the package:
- 1 x D254C1 Tripod with BH-28L Ball Head
- 1 x Tripod Package (carrying bag)
- Hex wrenches (for adjustments)

Image: Contents of the tripod package, including the tripod, carrying bag, and adjustment tools.
Unfolding the Tripod
- Release the leg locks on each leg.
- Extend each leg section to the desired height. The tripod features a quick flip leg lock system for fast adjustment.
- Press the spring self-locking foot tube angle adjustment button to set the desired leg angle.
- Ensure all leg locks are securely fastened before mounting equipment.

Image: Demonstrates the quick flip locking system for extending and securing tripod legs.
Attaching Your Camera
- Ensure the quick release plate is securely attached to your camera's tripod mount.
- Open the quick release clamp on the ball head.
- Slide the camera with the quick release plate into the clamp until it clicks into place.
- Tighten the clamp lever to secure the camera.
Video: A demonstration of setting up the tripod, attaching a camera, and using its features.
Operating Instructions
Adjusting Height and Angle
- Leg Height: Use the quick flip leg locks to extend or retract the 4-section tube legs.
- Center Column: The tripod features a 2-section center column. Loosen the center column lock knob to extend or retract it. For macro photography or low-angle shots, the center column can be inverted.
- Leg Angles: Press the spring self-locking foot tube angle adjustment button on each leg to adjust the spread angle of the legs. This allows for stable positioning on uneven terrain or for achieving very low shooting angles.

Image: Illustrates low angle photography using the inverted center column feature.
Ball Head Operation
- Pan Adjustment: Loosen the panning lock knob to rotate the camera 360 degrees horizontally for panoramic shots.
- Tilt/Swivel Adjustment: Loosen the main lock knob on the ball head to adjust the camera's tilt and swivel angle. Tighten the knob once the desired position is achieved.

Image: Shows a camera mounted on the ball head, highlighting the 360° panoramic shooting capability.
Monopod Conversion
One of the tripod legs can be detached and combined with the center column to form a monopod:
- Unscrew the leg with the foam grip from the tripod chassis.
- Unscrew the center column from the tripod chassis.
- Attach the ball head (or directly your camera) to the top of the detached leg.
- Alternatively, attach the center column to the detached leg to extend its height.

Image: Illustrates the process of converting one of the tripod legs into a monopod.
Maintenance
- Cleaning: Wipe down the tripod with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
- Lubrication: Periodically check moving parts. If any part feels stiff, apply a small amount of silicone-based lubricant. Do not over-lubricate.
- Storage: Store the tripod in its carrying bag in a dry, cool place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect all screws, bolts, and leg locks for tightness. Tighten any loose components using the provided hex wrenches.
Troubleshooting
Tripod Instability
- Issue: Tripod feels wobbly or unstable.
- Solution:
- Ensure all leg sections are fully extended and their flip locks are securely closed.
- Verify that the leg angle adjustment buttons are properly engaged for all three legs.
- Check that the center column lock knob is tightened if the center column is extended.
- Ensure the camera is properly mounted and the quick release clamp is fully tightened.
- Distribute the weight evenly. For added stability, hang a weight from the integrated hook at the bottom of the center column.
Stiff Leg Locks or Knobs
- Issue: Leg locks or adjustment knobs are difficult to operate.
- Solution:
- Clean any dirt or debris from the mechanisms.
- Apply a small amount of silicone-based lubricant to the moving parts.
Specifications
| Feature | Specification |
|---|---|
| Model Number | D254C1+BH-28L (SA254C4) |
| Material | Carbon Fiber (8-layer) |
| Max Extended Length | 1600mm (63 inches) |
| Folded Length | 410mm (16 inches) |
| Weight | 1.35kg (2.97 lbs) |
| Load Capacity | 10kg (22 lbs) |
| Leg Sections | 4 |
| Ball Head Diameter | 28mm (1.1 inches) |
| Height without Center Column | 1140mm (44.8 inches) |
| Tripod Type | Mini Tripod / Lightweight, Compact & Portable |
| Features | Detachable Monopod, 360° Panoramic Ball Head, Multi-Angle Shooting (inverted center column) |
| Recommended Use | 360° Video Camera, Point & Shoot Cameras, Special Camera, Mirrorless System Camera |

Image: Detailed specifications of the K&F Concept SA254C4 Tripod.

Image: Specifications for the KF-28 Ball Head, including dimensions and load capacity.
Warranty and Support
This K&F Concept tripod comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, warranty claims, or service inquiries, please contact K&F Concept customer service through their official website or the retailer where the product was purchased.
Please retain your proof of purchase for warranty validation.
User Tips
- Portability: The tripod's compact folded length (16 inches) and lightweight carbon fiber construction make it ideal for travel and outdoor photography. It can be easily carried in a backpack or suitcase.
- Versatility: Utilize the 360° ball head for panoramic shots and the detachable monopod feature for increased flexibility in various shooting scenarios.
- Low Angle/Macro: Don't forget to invert the center column for extreme low-angle or macro photography to get unique perspectives.