Product Overview
The ZENGGE Bluetooth Pixel LED Controller is designed to manage and customize the lighting effects of WS2811, WS2812B, SK6812, RGB, and RGBW addressable LED strip lights. It offers versatile control options via a dedicated mobile application and an included 2.4G wireless remote control. Key features include music synchronization, a wide array of pre-programmed lighting modes, DIY color customization, and a timing function.
This controller supports both USB (5V) and DC (5V-24V) power inputs, making it compatible with various LED strip configurations. Ensure to match the controller's voltage with your LED strip's voltage for proper operation.
ZENGGE Bluetooth Pixel LED Controller with LED strip, remote, and smartphone app interface.
Package Contents
- 1x LED Strip Light Controller
- (Optional, depending on purchase) 2.4G Wireless Remote Control
Note: The remote control requires one CR2025 battery, which is not included in the package.
Setup Instructions
1. Power Requirements
- USB Controller: Can only be used for 5V LED strip lights.
- DC Controller: Can only be used for 12V-24V LED strip lights.
Important: Ensure the power supply voltage matches the LED strip voltage (e.g., 5V power for 5V LED Strip, 12V power for 12V LED Strip, 24V power for 24V LED Strip).
2. Connection Diagrams
DC Controller Connection
Connect the DC power adapter to the controller, then connect the controller to the LED strip.
USB Controller Connection
Connect the USB power source to the controller, then connect the controller to the LED strip.
3. App Installation and Bluetooth Pairing
- Scan the "ZENGGE" QR code provided on the controller or in the product images to download the ZENGGE APP.
- Install the application on your smartphone.
- Ensure Bluetooth is enabled on your smartphone.
- Open the ZENGGE APP. The app should automatically detect and connect to the controller. If not, navigate to the device list within the app and select your controller.
- Ensure location services are enabled for the app if prompted, as this is often required for Bluetooth scanning on some devices.
Scan this QR code to download the ZENGGE APP.
4. Remote Control Pairing (if applicable)
- Remote Control Code Matching: Power on the LED device. Hold down the "ON" key on the remote for 5 seconds. The device flashes slowly to indicate successful code matching.
- Remote Code Clearing: Power on the LED device. Hold down the "OFF" key on the remote for 5 seconds. The device flashes quickly to indicate successful clearing.
Operating Instructions
1. APP Control
The ZENGGE APP provides comprehensive control over your LED strip lights. Once connected, you can:
- Adjust Color and Brightness: Select from a wide spectrum of colors and adjust the intensity to your preference.
- Pre-programmed Modes: Choose from over 100 built-in modes, including jump mode, rainbow running water mode, and meteor mode.
- DIY Mode: Customize your own lighting effects.
- Music Mode: Synchronize your LED lights with music playing from your phone or via the device's microphone.
- Timing Function: Set a timer for the lights to turn on/off or change modes at specific times.
App interface for color selection and mode control.
Music mode in the ZENGGE APP, showing LED lights reacting to sound.
Timing function settings within the ZENGGE APP.
DIY color customization options in the ZENGGE APP.
2. Remote Control Functions
The 2.4G wireless remote control offers convenient access to common functions:
Remote control layout and key functions.
| Button/Function | Description |
|---|---|
| Speed/Brightness +/- | Adjusts the speed of dynamic modes or brightness of static colors. |
| ON/OFF | Turns the LED lights on or off. |
| Static Colors Switch (CS, C3, C7) | Cycles through 7 static colors (Red/yellow/green/light blue/dark blue/purple/white). |
| Static RGB | Cycles through 3 static colors (Red/Green/Blue). |
| 7 Static Colors | Cycles through 7 static colors (Red/yellow/green/light blue/dark blue/purple/orange). |
| Loop Mode | Activates a built-in mode switch. |
| Overlay (From middle to both sides) / (From both sides to middle) | Controls specific overlay effects. |
| Fading Out (From right to left) / (From left to right) | Controls specific fading effects. |
| 7 Colors Flow Gradually | Activates a gradual color flow effect. |
| 7 Colors Run Circularly (From right to left) / (From left to right) | Controls specific circular color running effects. |
| Modes +/- | Cycles through built-in modes. |
| DIY Mode 1-4 (S1, S2, S3, S4) | Hold down for two seconds to record the current mode, and short press to trigger the recorded mode next time. |
| Music Mode 1-4 | Activates 4 different lighting effects that change with the rhythm of external music (Jump/Breathing/Strobe/Running Water). |
| 30M / 1H | Sets a 30-minute or 1-hour delay for turning off the lights. |
Maintenance
- Cleaning: Gently wipe the controller and remote with a dry, soft cloth. Avoid using liquid cleaners or abrasive materials.
- Battery Replacement (Remote): If the remote control's range or responsiveness decreases, replace the CR2025 battery. Ensure correct polarity when inserting the new battery.
- Storage: Store the controller and LED strips in a dry, cool environment away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
- LED Strip Not Lighting Up:
- Check if the power supply is correctly connected and providing the correct voltage (5V for USB, 12-24V for DC) matching the LED strip.
- Ensure the LED strip is correctly connected to the controller.
- Verify the controller is receiving power.
- App Not Connecting to Controller:
- Ensure Bluetooth is enabled on your smartphone.
- Ensure location services are enabled for the ZENGGE APP.
- Restart the ZENGGE APP and try reconnecting.
- Power cycle the LED controller.
- Remote Control Not Working:
- Check and replace the CR2025 battery in the remote control.
- Perform the remote control code matching procedure as described in the "Setup Instructions" section.
- Ensure there are no obstructions between the remote and the controller.
- Incorrect Colors or Effects:
- Verify that the correct IC type (e.g., WS2812B, SK6812) is selected in the ZENGGE APP settings, if applicable.
- Ensure the LED strip is connected with the correct data direction.
For further assistance, scan the "F&Q" QR code for detailed problem-solving information.
Scan this QR code for F&Q and troubleshooting details.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | ASMTLED |
| Model Number | ZENGGE Bluetooth Pixel LED Controller |
| Item Type | RGB controller |
| Features | Wireless APP or Remote Control |
| Voltage | 5-24V |
| Power Source | DC / USB |
| Wattage | <1W |
| Max. Load Power | 2048 Pixels |
| Controllable Method | Bluetooth |
| Remote Distance | 20m MAX (open area) |
| Applicable Lights | WS2812B SK6812 WS2811 LED Strip |
| Material | ABS |
| Oscillation frequency | 2.4Ghz |
| Certification | CCC, CE, LVD, UL, ROHS |
| Warranty | 1 Year |
| Origin | Mainland China |
Supported LED Strip Types
The controller supports various addressable LED strip types like WS2812B, SK6812, and WS2811.
Warranty and Support
Warranty
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
Returns Policy
Enjoy free returns within 90 days of purchase. Refer to the seller's return policy for detailed terms and conditions.
Delivery Guarantee
- Collect a $1.00 coupon if delivery is delayed.
- Full refund if the package is lost.
- Full refund if items are damaged upon arrival.
- Full refund if no delivery is made within 60 days.
Security & Privacy
We prioritize your security and privacy:
- Safe payments: Your personal details are not shared with any third parties without your consent.
- Secure personal details: Your privacy is protected, and personal details are kept safe and secure.
Customer Support
For any questions, technical support, or warranty claims, please contact the ASMTLED Official Store directly through the platform where you made your purchase. You can also refer to the F&Q section by scanning the provided QR code for common issues.
Product Video Demonstrations
Demonstration of the ZENGGE Bluetooth Pixel LED Controller's app control and music synchronization features.
Additional video demonstrating app control, music mode, and various dynamic lighting effects.