Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AELED ZENGGE Bluetooth Pixel LED Controller. This versatile controller allows you to manage your WS2812B, SK6812, and WS2811 RGB LED light strips via a mobile application or a 2.4G RF remote control, offering dynamic lighting effects and music synchronization.

Figure 1: ZENGGE Bluetooth Pixel LED Controller with accessories.
Safety Information
- Ensure the power supply voltage matches the controller's rated voltage (USB-5V, DC-12~24V) and the LED strip's voltage. Using incorrect voltage can damage the device and LED strip.
- Do not expose the controller to moisture or extreme temperatures.
- Keep out of reach of children.
- Disconnect power before making any connections or performing maintenance.
- The remote control requires a CR2025 battery (not included). Ensure correct polarity when inserting.
Package Contents
- 1x LED Strip Light Controller (Remote not including CR2025 battery)
Note: Depending on the variant purchased, the package may include a DC controller, USB controller, or a remote control. Please verify your specific order.

Figure 2: Controller variants (DC, USB, DC 2Keys, USB 2Keys).

Figure 3: Controller variants with remote controls.
Product Overview
The ZENGGE Bluetooth Pixel LED Controller is designed to provide dynamic and customizable lighting for various pixel LED strips. It supports popular IC types such as WS2812B, SK6812, and WS2811. Control is available through a dedicated mobile application (ZENGGE APP) via Bluetooth or an optional 2.4G RF remote control.
Key Features:
- Dual Control Methods: Wireless APP (Bluetooth) and 2.4G RF Remote Control.
- Wide Compatibility: Supports WS2812B, SK6812, WS2811, and other compatible pixel LED strips.
- Dynamic Lighting Modes: Over 100 built-in jump modes, DIY customization, rainbow running water, meteor, and curtain effects.
- Music Synchronization: Integrated microphone for music-responsive lighting effects.
- Timing Function: Schedule automatic turn on/off with delay switch.
- Adjustable Parameters: Control color, brightness, and dynamic effect speed.
- Extended Control Range: Up to 40m in open areas for remote control.

Figure 4: Key features of the Bluetooth Sound-Control SPI Controller.
Supported LED Products:
This controller is compatible with a variety of pixel LED products, including:
- WS2812B Ring
- WS2812B Pre-soldered LED
- 5V WS2812 String
- 5V Module
- WS2812B Strip
- SK6812 Strip
- WS2812B String
- WS2812 Panel

Figure 5: Examples of supported LED products.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | AELED |
| Model Number | ZENGGE Bluetooth Pixel LED Controller |
| Item Type | RGB controller |
| Features | Wireless APP or Remote Control |
| Rated Voltage | USB-5V, DC-12~24V |
| Voltage | 5-24V |
| Rated Power | 144W |
| Wattage | <1W |
| Power Source | DC |
| Controllable Points | Max 2048 Pixels |
| Support IC | 2812, 2811, 16703, 16704, 1903, 6812, 1003, 2904, etc. |
| Connection Mode | DC / USB |
| Controlled Method | Bluetooth |
| Oscillation Frequency | 2.4Ghz |
| Remote Distance | 20m MAX (40m in open area for 2.4G RF) |
| Material | ABS |
| Certification | UL, ROHS, LVD, CE, CCC |
| Warranty | 1 Year |
Setup Instructions
1. Wiring the LED Strip Controller
Ensure all connections are secure and power is disconnected before wiring.
DC Controller Connection:
- Connect the DC power adapter to the controller's DC input port.
- Connect the controller's output cable to your 12-24V pixel LED strip.
- Ensure the LED strip's voltage matches the power adapter and controller.

Figure 6: DC Controller Connection Diagram.
USB Controller Connection:
- Connect the USB plug of the controller to a 5V USB power source (e.g., USB adapter, power bank).
- Connect the controller's output cable to your 5V pixel LED strip.
- Ensure the LED strip is rated for 5V.

Figure 7: USB Controller Connection Diagram.
2. ZENGGE APP Installation
- Scan the QR code provided on the controller or in the product images to download the ZENGGE APP.
- Alternatively, search for "ZENGGE" in your smartphone's app store (Google Play Store for Android, Apple App Store for iOS).
- Install the application on your mobile device.

Figure 8: Scan QR code to download ZENGGE APP.
3. Bluetooth Connection
- Ensure Bluetooth is enabled on your smartphone.
- Open the ZENGGE APP. The app should automatically detect and connect to the controller if it's powered on and within range.
- If connection fails, ensure location services are enabled for the app (required for Bluetooth scanning on some devices).
Video 1: ZENGGE App Control Demonstration.
Operating Instructions
1. Using the ZENGGE APP
The ZENGGE APP offers comprehensive control over your LED strip:
- Color & Brightness Adjustment: Select from a wide spectrum of colors and adjust brightness levels.
- Dynamic Modes: Choose from over 100 built-in modes, including jump, running water, strobe, and breathing effects.
- DIY Mode: Customize your own lighting sequences and colors.
- Music Mode: Synchronize lighting effects with music played through your phone's microphone or the app's internal music player.
- Timing Function: Set schedules for the LED strip to turn on or off automatically.

Figure 9: ZENGGE App - DIY Color Selection.

Figure 10: ZENGGE App - Music Mode.

Figure 11: ZENGGE App - Lighting Effects.

Figure 12: ZENGGE App - Foreground/Background Color.

Figure 13: ZENGGE App - Timing Function.

Figure 14: ZENGGE App - Light Patterns and Auto Mode.
2. Using the 2.4G RF Remote Control
The remote control provides quick access to essential functions:

Figure 15: Remote Control Key Functions.
| Button/Function | Description |
|---|---|
| Speed/Brightness +/- | Adjusts the speed of dynamic modes or brightness of static colors. |
| ON/OFF | Turns the LED strip on or off. |
| Static Colors (CS, C3, C7) | Selects predefined static colors (e.g., 7 static colors switch, 3 static colors switch). |
| Loop Mode | Activates a loop through various lighting effects. |
| Modes +/- | Cycles through built-in dynamic modes. |
| Scene 1-4 (S1, S2, S3, S4) | Selects custom DIY scenes. Hold for 2 seconds to record the current mode. |
| Music Mode 1-4 | Activates different lighting effects that change with the rhythm of external music. |
| 30M / 1H | Sets a 30-minute or 1-hour delay off timer. |
Remote Control Code Matching:
- Power on the device.
- Hold down the "ON" key on the remote for 5 seconds. The device will flash slowly to indicate successful code matching.
Remote Control Code Clearing:
- Power on the device.
- Hold down the "OFF" key on the remote for 5 seconds. The device will flash quickly to indicate successful clearing.
Maintenance
- Keep the controller and remote clean by wiping with a dry, soft cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Store in a cool, dry place when not in use for extended periods.
- If the remote control stops responding, check and replace the CR2025 battery.
Troubleshooting
- LED strip not lighting up:
- Check all power connections to ensure they are secure.
- Verify that the power supply voltage matches the LED strip and controller requirements (5V for USB, 12-24V for DC).
- Ensure the LED strip is correctly connected to the controller's output.
- Confirm the controller is powered on.
- App not connecting to controller:
- Ensure Bluetooth is enabled on your smartphone.
- Grant location permissions to the ZENGGE app if prompted.
- Make sure the controller is powered on and within Bluetooth range (approx. 40m in open areas).
- Try restarting the app and the controller.
- Remote control not working:
- Check if the CR2025 battery is inserted correctly and has sufficient charge. Replace if necessary.
- Ensure the remote is paired with the controller (refer to "Remote Control Code Matching" in the Operating Instructions).
- Make sure there are no obstructions between the remote and the controller.
- Inconsistent lighting effects or colors:
- Verify that the LED strip type (e.g., WS2812B) is compatible with the controller.
- Check for loose connections in the LED strip or controller wiring.
- If issues persist, try clearing the remote code and re-matching, or reinstalling the app.
For further assistance, please refer to the F&Q section by scanning the QR code shown in Figure 8.
User Tips
- When setting up, ensure your LED strip's voltage (5V, 12V, or 24V) perfectly matches the power supply and the controller type (USB for 5V, DC for 12-24V) to prevent damage.
- For optimal music synchronization, place your smartphone or the controller's microphone close to the audio source.
- Experiment with the DIY modes in the ZENGGE app to create unique lighting scenes tailored to your preferences.
- If using multiple controllers, remember that one remote can control many controllers after proper code matching.
Warranty and Support
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or refer to the official product support channels.