1. Product Overview
The UGREEN M.2 NVMe/SATA SSD Enclosure is a high-performance external storage solution designed for M.2 NVMe and SATA SSDs. It supports data transfer speeds of up to 20Gbps for NVMe drives (with a compatible USB 3.2 Gen2x2 port) and 6Gbps for SATA drives. Its aluminum alloy body and thermal design ensure efficient heat dissipation for stable operation.

Key Features:
- Dual Protocol Support: Compatible with both M.2 NVMe (PCIe) and M.2 SATA (NGFF) SSDs.
- High-Speed Transmission: Up to 20Gbps for NVMe (USB 3.2 Gen2x2 required) and 6Gbps for SATA.
- Wide Compatibility: Supports M&B Key and M Key NVMe/PCIe SSDs, and M&B Key NGFF/SATA SSDs.
- SSD Size Support: Accommodates 2230, 2242, 2260, and 2280 form factors.
- Large Capacity: Supports up to 8TB hard drive capacity.
- Efficient Heat Dissipation: Features an aluminum alloy body, silicone thermal pad, and thermal fin for optimal cooling.
- Plug & Play: No drivers required for Windows, Linux, Mac OS, Android, and iOS systems.
- Work Indicator Light: Provides status feedback (standby/hibernate, reading/writing data).
- Shock-proof Design: Includes a silicone case for added protection.

2. Package Contents
Please verify that all items are present in your package:
- SSD Case
- Silicone Case
- USB C to C Cable (approx. 33cm)
- USB A to C Cable
- Screwdriver
- Fixed buckle
- User Instruction Manual (this document)
- Warranty Card

3. Setup Guide
Follow these steps to install your M.2 SSD into the enclosure:
- Take out the silicone cover: Gently remove the outer silicone protective cover from the enclosure.
- Unscrew the screw to open the cover: Use the provided screwdriver to loosen and remove the screw, then slide open the enclosure cover.
- Align the hard drive interface: Carefully insert your M.2 SSD into the enclosure, ensuring the interface aligns correctly with the connector.
- Fixed hard drive by screw cap: Secure the SSD in place using the provided screw cap.
- Affix the heat dissipation silicone sticker: Peel off the protective film from the thermal silicone pad and carefully place it onto the SSD, ensuring good contact for heat transfer.
- Completed installation: Slide the cover back on, secure it with the screw, and then re-attach the silicone protective cover.

4. Operating Instructions
Connecting the Enclosure:
Use the provided USB C to C cable or USB A to C cable to connect the enclosure to your computer, laptop, or compatible mobile device. The enclosure is plug-and-play and does not require additional drivers for most operating systems.

LED Indicator Status:
- White light on: Indicates standby or hibernate mode.
- White light flashing: Indicates data is being read from or written to the SSD.

Data Transfer Speeds:
The enclosure supports NVMe speeds up to 20Gbps (USB 3.2 Gen2x2) and SATA speeds up to 6Gbps. Actual speeds may vary based on your SSD, host device, and cable used.


5. Maintenance
Heat Dissipation:
The enclosure is designed with an aluminum alloy body, a thermal silicone pad, and a thermal fin to effectively dissipate heat from the SSD, ensuring stable performance and longevity. No active cooling is required under normal operating conditions.

Protection:
The included silicone case provides an extra layer of protection against scratches and minor impacts, making the enclosure more durable and portable.

Cleaning:
Wipe the enclosure with a soft, dry cloth. Avoid using liquid cleaners or solvents.
6. Troubleshooting
- Enclosure not recognized:
- Ensure the SSD is correctly installed and secured within the enclosure.
- Try connecting to a different USB port or using a different USB cable.
- Verify that your SSD is properly formatted for your operating system.
- If connecting to a mobile device, ensure the device supports external storage and has sufficient power output. Some mobile devices may require a firmware update for the enclosure or may not provide enough power for certain NVMe SSDs.
- Slow transfer speeds:
- For 20Gbps speeds, your computer must have a USB 3.2 Gen2x2 port. Otherwise, speeds will be limited to 10Gbps (NVMe) or 6Gbps (SATA).
- Ensure you are using the provided high-quality USB cables.
- Check if your SSD is NVMe or SATA; SATA drives will operate at a maximum of 6Gbps.
- Close other applications that might be using system resources or disk I/O.
- Enclosure gets warm during use:
- This is normal, especially during heavy data transfer, due to the high-speed operation of M.2 SSDs. The aluminum body and thermal pad are designed to dissipate this heat.
- SSD not fitting:
- Ensure your M.2 SSD is one of the supported sizes (2230, 2242, 2260, 2280) and has the correct keying (M Key or B&M Key).
- If your SSD has a heatsink, it might not fit in the enclosure. The enclosure is designed for bare M.2 SSDs.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | UGREEN |
| Product Name | M.2 NVMe SATA Dual Protocol Case |
| Model Number | CM559 (also CM767, CM642, CM850) |
| Support | M.2 NVMe / SATA SSDs |
| Built-in Interface | M.2 M Key |
| USB Standard | USB 3.2 Gen2x2 |
| Transmission Speed | 20Gbps (NVMe) / 6Gbps (SATA) |
| Compatible SSD Size | 2230 / 2242 / 2260 / 2280 |
| Supporting Hard Drive Capacity | Up to 8TB |
| Case Material | Aluminum Alloy |
| Compatible With | Windows 11/10/8.1/8/7/XP, Linux, Mac OS, Android, iOS |
| Dimensions | 123mm (L) x 38mm (W) x 12.5mm (H) |

8. User Tips
- Maximize Speed: To achieve the advertised 20Gbps transfer rate, ensure your computer's USB port is a USB 3.2 Gen2x2 Type-C port. Connecting to older USB standards will result in lower speeds.
- Mobile Device Compatibility: While the enclosure supports mobile devices, some smartphones (e.g., certain Samsung Galaxy models) might experience power issues with NVMe SSDs. Check for device-specific firmware updates or consider using a powered USB hub if issues arise.
- SSD Heatsinks: The enclosure is designed for M.2 SSDs without integrated heatsinks. If your SSD has a heatsink, it may not fit.
- Initial Use: If your SSD is new, you may need to initialize and format it through your operating system's disk management utility before it appears as a usable drive.
9. Warranty and Support
UGREEN products come with a standard warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact UGREEN customer service through their official website or the contact information provided on your Warranty Card.
10. Product Video
Watch the official product video for a visual guide on the UGREEN M.2 NVMe/SATA SSD Enclosure's features and usage.