1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your iJDM LED Front Bumper Turn Signal Lights Assembly. This product is designed to replace the original halogen bulbs in 1999-2001 Subaru Impreza RS Coupe models, offering enhanced visibility and a modern aesthetic. It features high-brightness LED chips, providing energy efficiency, an extended lifespan, rapid startup, and high luminosity. The lights function as xenon white parking/DRL lights and dynamic amber sequential turn signals.

Figure 1: Product overview with packaging and installed lights.
2. Safety Precautions
- Always turn off the engine, switch off all lights, and disconnect the battery's negative terminal before beginning installation to prevent short circuits or electric shock.
- Allow the engine and lights to cool completely before handling to avoid burns.
- Do not touch LED bulbs directly with bare hands. Skin oils can impair heat dissipation and shorten the bulbs' lifespan.
- Wear insulated gloves during installation.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | iJDM |
| Item Type | Turn Signal |
| For Vehicle Brands/Model | Subaru |
| Subaru Model | IMPREZA |
| Impreza-Year | 1999, 2000, 2001 |
| Car Models | For 1999-2001 Subaru Impreza RS |
| Model Name | For 1999-2001 Subaru Impreza |
| Voltage | 12 V |
| Wattage | 21w/5w |
| Lumens | 200Lm |
| Interface Type | BA15S (1156) |
| Item Weight | 400g |
| Waterproof Rating | IP67 |
| Operating Temperature | -40 to 60 degrees Celsius |
| Replace OEM Part Numbers | 84441FA160, SU2531104, 84441FA170, SU2530104 |

Figure 2: IP67 Waterproof Rating.
4. Package Contents
- 2 x iJDM LED Front Bumper Turn Signal Lights Assembly (Clear or Smoked Lens, depending on selection)
- 2 x Error-Free Resistors

Figure 3: Available lens options: Smoked and Clear.
5. Setup and Installation
This product is a specialized LED lighting bulb for automobiles, utilizing high-brightness LED chips. It offers advantages such as energy efficiency, extended lifespan, rapid startup, and high luminosity. Designed to replace original halogen bulbs, it is compatible with various automotive lighting applications including headlights, fog lights, daytime running lights, and turn signals. Operating at a DC 12V voltage, it is suitable for the electrical systems of most passenger vehicles.
5.1. Verify Compatibility
Check the original vehicle bulb model (refer to the bulb label or vehicle owner's manual) to ensure the LED bulb's connector type and wattage match the original equipment. If unsure about the product's suitability for your vehicle model and year, consult the seller or a professional beforehand. The product description includes corresponding wiring diagrams. If unclear, consult the seller.
5.2. Prepare Tools
You will need: Insulated gloves, Phillips/flathead screwdriver, electrical tape, zip ties, multimeter (optional), and your vehicle repair manual (for complex models).
5.3. Installation Steps
- Remove the OEM license plate light housing from the vehicle. If possible, use a plastic trim tool to prevent damage.
- Remove the factory plug from the OEM light housing.
- Insert the new plug from the LED light into the factory plug.
- Put the OE socket back into the light to avoid water ingress.
- Install the new LED light back onto the vehicle.
Wiring for Switchback Functionality: Wiring actions are required to enable the optional xenon white LED feature. Connect the extra red wire from the LED assembly to your ACC 12V+ or the original parking light bulb's positive wire to enable the xenon white LED feature (DRL/Driving Lights).

Figure 4: Wiring diagram for installation.
Wiring Guide:
- Black Wire: Negative
- Red Wire: Brake light
- Green Wire: Signal light
- White Wire: Tail light
The included error-free resistor reduces the flow of electricity back to the vehicle to cancel any warning lights.
For detailed installation videos, search video-sharing websites using your vehicle model and year. For further installation questions, consult the seller.
A user manual in PDF format is available for download: View User Manual (PDF)
6. Operating Instructions
Once installed, these LED lights provide dual functionality:
- Daytime Running Lights (DRL) / Parking Lights: When connected to ACC 12V+ or the original parking light positive wire, the lights will illuminate in xenon white, providing enhanced visibility during driving.
- Turn Signal Lights: When the turn signal is activated, the lights will flash in dynamic amber, providing clear indication to other drivers.

Figure 5: Amber Turn Signal Light Mode and White Running Light Mode.

Figure 6: Sequential flash turn signal lights in action.
7. Maintenance
- Regularly inspect the lights for any dirt or debris accumulation. Clean with a soft, damp cloth if necessary. Avoid abrasive cleaners.
- Check wiring connections periodically to ensure they remain secure and free from corrosion.
- The LED bulbs are designed for long life and typically do not require replacement. If a light fails, contact customer support.
8. Troubleshooting
- Lights not turning on: Check all wiring connections, ensuring positive (+) is connected to positive (+) and negative (-) to negative (-). Verify the vehicle's fuse for the lighting circuit.
- Warning lights on dashboard: The product includes an error-free resistor to prevent this. If warning lights persist, double-check the resistor installation and connections. Consult a professional if the issue continues.
- Dynamic function not working: Ensure the extra wire for the xenon white LED feature is correctly connected to a 12V+ power source (ACC or parking light positive).
- Water inside the lens: Although the product is IP67 waterproof, ensure the OE socket is properly sealed back into the light housing during installation to prevent water ingress.
9. User Tips
- When installing, pay close attention to the fitment in the bumper. While the product is designed for direct replacement, minor adjustments or careful positioning may be needed for optimal aesthetic integration.
- If you prefer not to have the dynamic (sequential) turn signal function, ensure the wiring for this specific feature is not connected during installation.
10. Warranty and Support
iJDM products are backed by a genuine warranty. For any questions regarding installation, operation, or product defects, please contact the seller or iJDM customer support. All items are tested before shipping to ensure quality. If you receive a defective item or are not satisfied, please contact the seller for a replacement or refund. No returns are accepted for electronic components once installed if not defective.