Introduction
Thank you for choosing the CAIXI GX9 Pro Car Multimedia Player. This manual provides detailed instructions for the installation, operation, and troubleshooting of your new device. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Important Pre-Installation Note:
Upon receiving the product, please do not install it directly into your car. Due to potential impacts during transit, it is recommended to test the unit before full installation to ensure it is functioning correctly.
Safety Information
- Ensure all connections are secure and correctly wired to prevent damage to the unit or vehicle.
- Do not attempt to modify or disassemble the unit, as this may void the warranty and cause electrical hazards.
- Always consult a professional for installation if you are unsure about any steps.
- Avoid operating the device in a way that distracts you from driving.
Package Contents
The package typically includes the following items:
- 9.7" Machine (Head Unit)
- Frame (for Kia Sportage 3 SL 2010-2016)
- Power Cable
- RCA Cable
- Camera Input Cable
- USB Cable (x2, GX9 Pro models may include x3)
- GPS Module
- 4G SIM RCA Cable (for GX9 Plus/GX9 Pro)
- 4G Antenna (for GX9 Plus/GX9 Pro)
- Audio Out Cable (for GX9 Pro)
- MIC-Gift (Optional external microphone)

Setup
1. Compatibility Check
This head unit is designed for Kia Sportage 3 SL models from 2010-2016. Please verify your original car radio type before installation.

2. Rear Interface Description and Wiring
Refer to the diagram below for the rear interface connections. Ensure all connections are made correctly to avoid damage or malfunction.

Key Wiring Notes:
- Power (Yellow B+ and Red ACC): The unit powers on normally when both yellow B+ (constant 12V) and red ACC (ignition switch 12V) lines receive positive power simultaneously. The yellow B+ line maintains power for memory function.
- Speaker Wires: There are 8 speaker cables. Each cable must NOT be grounded, shared, or touch other lines. Incorrect wiring will result in no sound output, distorted sound, or overheating.
3. Reversing Camera Installation
Follow the diagram to connect the reversing camera. The pink wire (Reverse) should be connected to the reversing light's positive pole (12V) to trigger the screen to display the camera feed.

Important:
If a reversing camera is NOT installed, do not connect the REVERSE/BACK cable to any location. Leave it unconnected. Otherwise, the unit may display incorrectly or automatically enter reverse mode, potentially causing malfunction. If this occurs, disconnect the REVERSE/BACK line immediately.
4. CANBUS Connection
CANBUS connection is required for certain car models to integrate with vehicle systems. Refer to the diagrams for high-end and low-end model cars.


Attention:
If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.
Operating Instructions
1. Steering Wheel Controls Learning
To program steering wheel controls:
- Press and hold a button on the original car's steering wheel.
- Find the corresponding button icon on the head unit's screen.
- Click the icon to change its color, indicating successful learning.

2. Apple CarPlay and Android Auto
The unit supports both wired and wireless Apple CarPlay and Android Auto, allowing intelligent and safe use of your smartphone for navigation, calls, messages, and music.


Wired Connection:
Simply connect your phone via a USB data cable to enter the CarPlay/Android Auto interface.
Wireless Connection:
- Enable Bluetooth and Wi-Fi on your mobile phone.
- Connect to the head unit's Bluetooth.
- The unit will automatically enter the CarPlay/Android Auto interface. (Note: The signal is transmitted via Wi-Fi. If Bluetooth is turned off, it will still transmit normally. If Wi-Fi is turned off, the connection will be disconnected.)
For Android Auto, you may need to download and install the "Android Auto" app from Google Play. This feature may not be supported in all countries, and Google Play services need to be available locally.
3. 4G Network and 5G WiFi
Connect to 4G networks and 5G WiFi for online streaming, gaming, and seamless internet access in your car.


4. GPS Navigation
The unit comes with pre-installed maps (Navitel, IGO, Yandex, Waze) and offers free permanent updates. You can also download and install other navigation apps from the Google Play Store.

5. DSP Equalizer and Subwoofer Output
The built-in DSP (Digital Sound Processor) allows for precise control over various sound frequencies, providing an enhanced audio experience. The unit also supports independent amplification and output for front and rear subwoofers, filtering high frequencies and controlling power distribution to each speaker.



6. AI Voice System (Optional)
The AI Voice System allows you to control various functions using voice commands, such as navigation, music playback, and video control. This feature requires a separate purchase of an activation code.

7. Bluetooth Support
The unit supports Bluetooth 5.1, enabling phonebook synchronization, caller ID display for incoming/dialed/missed calls, and Bluetooth music streaming.

8. Air Conditioning Control
The unit supports the control and display of the original car's automatic air conditioning system.

9. ADAS DVR (Optional)
The optional ADAS DVR provides early warnings for potential collisions (car too close) or lane departures, enhancing driving safety. This feature requires a separate purchase.

10. Tire Pressure Monitoring System (TPMS) (Optional)
The optional TPMS displays real-time tire pressure and temperature, triggering alarms if limits are exceeded. This feature requires a separate purchase.

11. OBDII Diagnostic (Optional)
The optional OBDII diagnostic tool monitors vehicle health in real-time and displays diagnostic values, with a database of over 3000 code definitions. This feature requires a separate purchase.

12. USB Media Playback
The unit supports media playback from USB flash drives. Ensure the USB drive is formatted to FAT32. If issues arise, try re-downloading songs or replacing the USB drive.
13. FM Radio
To use the FM radio, ensure the antenna plug is fully inserted. If reception is poor, check the antenna connection or try searching for stations using the 'AS' button for automatic search.
14. DAB+ Tuner (Optional)
Enjoy high-quality digital radio broadcasting with the optional DAB+ radio receiver stick, which connects via the USB port. This feature requires a separate purchase.

Maintenance
- Keep the screen clean using a soft, dry cloth. Avoid abrasive cleaners.
- Ensure proper ventilation around the unit to prevent overheating. The unit has a built-in cooling fan for optimal performance.
- Regularly check wiring connections for any looseness or damage.
- Update the Android system periodically to fix bugs and improve performance. Follow the official CAIXI mall for update information.

Troubleshooting
This section addresses common problems and their solutions. If you encounter an issue not listed here, or if the suggested solutions do not resolve the problem, please contact customer service.
1. Cannot Boot Normally
- Wiring Check: Ensure the yellow (B+), red (ACC), and black (GND) wires are correctly connected. Yellow to constant 12V positive, red to ignition switch 12V, black to negative ground. Incorrect or insufficient connections will prevent booting.
- Fuse Check: If the unit doesn't boot despite correct wiring, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn on the ignition, and press the power button to test.
- Power Supply Test: If the unit still doesn't boot, connect the yellow and red wires to a 12V battery or 12V power supply (positive) and the black wire to negative. If it boots, the issue is with your car's wiring. If not, the unit may be faulty.
2. Automatic Shut-down
- Incorrect Wiring: If the blue (automatic antenna power supply) cable is connected to the unit's power cable, it will cause automatic shutdown. Correct the wiring.
- Unstable Voltage: Test the power supply with a stable 12V-5A source. If it still shuts down automatically, replace the power supply. If it doesn't shut down, the unit is faulty.
3. Audio Issues (Noise, No Sound)
- Noise: If there's noise when the volume is high, the original speaker power might be too low. Avoid excessively high volume. If a speaker cable is grounded, connect it directly to the unit's speaker cable.
- No Sound After Installation: This is usually a wiring error or a short-circuited speaker wire. Check for short circuits and reconnect. Ensure each speaker has two wires and that the original car's speaker wiring matches the unit's requirements (e.g., 2 speakers need 4 cables).
- No Sound After A While: Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple wires of the tail line. If there's sound, the car's speaker line is short-circuited or the speaker is damaged. If no sound, the unit is broken.
4. Remote Control Not Working
- Test: Use your phone camera to view the remote control's light while pressing buttons. If the light doesn't illuminate, replace the battery. If it lights up, the remote control is functional.
5. Settings Not Saved (No Memory)
- Ensure the yellow and red lines are connected correctly (yellow to positive, red to key control).
- If yellow and red are reversed, simply swap their positions.
6. Bluetooth Not Working
- Turn on the unit, search for its Bluetooth name on your mobile phone, and click 'Connect'.
7. Product Emits Smoke
- Replace the FUSE. If the problem persists, the internal circuit is burned. Contact customer service.
8. Sound Cannot Be Adjusted
- Reset the unit or unplug/replug the power cord.
- If the volume knob is broken, it can be replaced.
9. Reversing Camera Not Displaying
- Check for incorrect or missing wiring. Refer to the installation method.
- If the camera is broken (lamp not lighting up), replace it.
10. USB Devices Cannot Be Played
- Format the USB flash drive to FAT32. Re-download media files. If the issue persists, replace the USB drive.
11. FM Radio Not Receiving Stations
- Ensure the antenna plug is fully inserted and connected.
- Use the 'AS' button for automatic station search.
- If problems persist, try unplugging the antenna and inserting a screwdriver or metal strip in its place to test.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | CAIXI |
| Operating System | Android 12 |
| RAM | 6G (Optional: 1G) |
| ROM | 128G (Optional: 32G) |
| CPU | 8-Core 1.8 GHz |
| Display Size | 9.7" QLED Screen |
| Resolution | 1024*768 |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Din | Double Din |
| Out Power | 50WX4 |
| Voltage | 12 V |
| Item Weight | 1.7kg |
| Item Size | 240mm*200mm*120mm |
| Max External Memory | 128G |
| Special Features | Wifi function, Support steering wheel control, Support 4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Built-in Cooling Fan |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support including English, Spanish, Russian, French, German, Italian, Portuguese, etc. |
| For Vehicle Brands/Model | KIA SPORTAGE (2010-2015) |
| Certification | CE |
| Material | Abs+ |
| Subwoofer Output | Support |
| WIFI | Built-in 5G and 2.4G WiFi |
| AV-OUT | WiFi version support, 4G version not |

User Tips
- Instant Connectivity: Users report instant connection with Android Auto and CarPlay, making it convenient for immediate use.
- Check DashCam Compatibility: Some users noted the inability to configure a dashcam. Ensure your dashcam is compatible or consider optional accessories if this feature is important to you.
- Verify Wiring Carefully: If you experience issues like the unit not booting or cables not matching, double-check all wiring connections against the provided diagrams. Incorrect wiring is a common cause of problems.
- Original Camera Integration: If your car has an original camera, verify if it can be connected to the head unit. Some installations may require specific adapters or wiring adjustments.
- Factory Settings Code: For advanced adjustments, a factory code might be required. This is typically provided by customer support or found in specific technical documentation.
Warranty and Support
If you encounter any issues or require technical assistance, please refer to the contact information below. We are committed to providing lifetime service for our products.
Warranty:
The product typically comes with a standard warranty. Sharing photos of your installed product on AliExpress and providing 5-star feedback may extend your warranty to 1 year.
Technical Support:
Contact technical support via the AliExpress messaging system. Due to time zone differences, responses are typically provided within 24 hours.
System Updates:
The system is updated periodically to fix bugs and improve performance. Follow the official CAIXI mall to automatically receive updated information.
Contact Information
For further assistance, please contact our customer service through the following channels:


