UGREEN CM499

Contents

UGREEN AX1800 WiFi6 USB 3.0 Dual-Band WiFi Adapter User Manual

Model: CM499

1. Introduction

Thank you for choosing the UGREEN AX1800 WiFi6 USB 3.0 Dual-Band WiFi Adapter. This device is designed to provide high-speed Wi-Fi 6 connectivity for your desktop PC or laptop, enabling faster internet speeds, lower latency, and improved network efficiency. This manual will guide you through the setup, operation, and troubleshooting of your new WiFi adapter.

UGREEN AX1800 WiFi6 USB 3.0 Dual-Band WiFi Adapter

Image 1.1: UGREEN AX1800 WiFi6 USB 3.0 Dual-Band WiFi Adapter.

2. Key Features

  • Wi-Fi 6 Technology (AX1800): Experience significantly faster speeds and lower latency compared to Wi-Fi 5.
  • Dual-Band Connectivity: Supports both 5GHz (up to 1200Mbps) and 2.4GHz (up to 574Mbps) bands for flexible and stable connections.
  • USB 3.0 Interface: Ensures high-speed data transfer, crucial for maximizing Wi-Fi 6 performance.
  • Advanced Technologies: Includes MU-MIMO for multi-device connectivity without conflicts, OFDMA for multi-task parallel transmission, and TWT (Target Wake Time) for reduced power consumption.
  • 2-in-1 Functionality: Operates in both Receive Mode (connecting your computer to Wi-Fi) and Launch Mode (creating a Wi-Fi hotspot).
  • WPA3 Encryption: Provides enhanced network security with support for WPA3-SAE/WPA-PSK/WPA2-PSK/64-bit, WEP/128-bit encryption methods.
  • Built-in Driver: Automatic driver installation for Windows 10/11 systems, simplifying setup.
  • Efficient Heat Dissipation: Unique design prevents overheating and dust accumulation for stable operation.
  • Powerful REALTEK Chip: Ensures reliable and high-performance wireless connectivity.
Wi-Fi 6 Technology speed and latency comparison

Image 2.1: Comparison of Wi-Fi 6 vs. Wi-Fi 5 speeds and latency. Wi-Fi 6 offers up to 1201Mbps and 10ms latency, while Wi-Fi 5 offers 433Mbps and 30ms latency.

Diagram showing MU-MIMO, OFDMA, and TWT technologies

Image 2.2: Advanced technologies: MU-MIMO for multi-connectivity, OFDMA for multi-task parallel transmission, and TWT for intelligent device sleep/wake timing.

3. Setup Guide

3.1 System Requirements

  • Operating System: Windows 10 / Windows 11
  • Available USB 3.0 port (recommended for optimal performance)

3.2 Installation Steps

  1. Insert the Adapter: Plug the UGREEN AX1800 WiFi Adapter into an available USB 3.0 port on your desktop PC or laptop. It is recommended to use a USB 3.0 port to achieve the full performance of the wireless card.
  2. Driver Installation: For Windows 10 and Windows 11, the adapter features a built-in driver. The system should automatically detect the device and install the necessary drivers.
  3. Verify Installation: Once installed, observe the indicator light on the adapter.
    • White light does not light up: Driver is not installed. Please ensure your system is Windows 10/11 and try re-inserting the adapter.
    • Blinking white light: Indicates normal operation and successful driver installation.
  4. Connect to Wi-Fi: After successful installation, you can connect to your desired Wi-Fi network through your operating system's network settings.
USB 3.0 Interface on the WiFi adapter

Image 3.1: The USB 3.0 interface of the adapter, essential for fast gigabit networking.

Screenshot showing built-in driver installation for Windows 11/10

Image 3.2: The adapter features a built-in driver for Windows 11/10, simplifying the installation process.

Diagram showing adapter light status for driver installation and normal use

Image 3.3: Device status indicator lights: no light means driver not installed, blinking white light means normal use.

4. Operating Instructions

4.1 Receive Mode

In Receive Mode, the adapter functions as a standard Wi-Fi receiver, allowing your computer to connect to existing Wi-Fi networks. Simply select your desired network from the available Wi-Fi list in your operating system's network settings and enter the password if required.

Diagram showing the adapter in Receive Mode, connecting a computer to a WiFi router

Image 4.1: Receive Mode setup, connecting your computer to a Wi-Fi network.

4.2 Launch Mode (Hotspot)

The adapter can also function in Launch Mode, allowing you to create a Wi-Fi hotspot from your computer to share its internet connection with other devices. This feature is supported by Windows 10/11 systems and is also known as SoftAP function.

  1. Ensure your computer has an active internet connection (e.g., via Ethernet).
  2. Access your computer's network settings (e.g., Mobile hotspot settings in Windows).
  3. Enable the mobile hotspot feature and configure the network name (SSID) and password.
  4. Other devices can now connect to the Wi-Fi hotspot created by your adapter.
Diagram showing the adapter in Launch Mode, creating a WiFi hotspot from a computer for a mobile phone

Image 4.2: Launch Mode setup, creating a Wi-Fi hotspot from your computer.

4.3 Dual-Band Switching

The adapter supports both 5GHz and 2.4GHz frequency bands. The 5GHz band offers faster speeds and lower latency, ideal for gaming and streaming, while the 2.4GHz band provides a stronger signal and better penetration through walls, suitable for longer distances and general browsing. Your system will typically switch between these bands automatically for optimal performance, or you can manually select the preferred band if your router broadcasts separate SSIDs for each band.

Diagram illustrating 5GHz and 2.4GHz dual-band switching

Image 4.3: Dual-band switching between 5GHz for fast speed and 2.4GHz for stable connection through walls.

5. Specifications

FeatureDescription
Brand NameUGREEN
Model CodeCM499
Model NameUGREEN AX1800 Dual-Band WiFi Adapter (WiFi6)
ChipREALTEK
USB Port1 x USB 3.0
Antenna2 x Internal high-gain antenna
Operating Frequencies5GHz & 2.4GHz
Transfer Rate1200Mbps Max (5GHz), 574Mbps Max (2.4GHz)
Wireless StandardsIEEE802.11b/g/n, IEEE802.11a/ac, IEEE802.11ax
Wireless Protocol802.11n, 802.11ax, 802.11a/g, 802.11ac
EncryptionWPA3-SAE/WPA-PSK/WPA2-PSK/64-bit, WEP/128-bit
Operating ModeReceive Mode (Station Mode) & Launch Mode (SoftAP)
Compatible SystemsWindows 10 / Windows 11
ApplicationDesktop, Laptop
Heat DissipationSupported (Unique design)
CertificationCE, FCC
PackageUGREEN Retail Box
Product Specifications table

Image 5.1: Detailed product specifications for the UGREEN AX1800 WiFi Adapter.

6. Maintenance

  • Keep Clean: Regularly clean the adapter with a soft, dry cloth to prevent dust accumulation, especially around the USB connector and ventilation areas.
  • Avoid Physical Damage: Do not drop, bend, or expose the adapter to excessive force.
  • Temperature and Humidity: Store and operate the adapter in a dry environment, away from extreme temperatures and high humidity.
  • Proper Removal: Always safely eject the USB device from your operating system before physically removing it to prevent data corruption or damage.
Diagram showing the unique heat dissipation design of the adapter

Image 6.1: The adapter's unique heat dissipation design helps prevent overheating and dust accumulation.

7. Troubleshooting

  • Adapter Not Detected / No Light:
    • Ensure the adapter is firmly plugged into a USB port.
    • Try a different USB port, preferably a USB 3.0 port.
    • Verify your operating system is Windows 10 or Windows 11.
    • Restart your computer.
  • Slow Internet Speed:
    • Ensure the adapter is connected to a USB 3.0 port. USB 2.0 ports will limit performance.
    • Confirm your router supports Wi-Fi 6 (802.11ax) and is configured for optimal performance.
    • Check if you are connected to the 5GHz band for higher speeds.
    • Ensure your Wi-Fi 6 router is compatible with the adapter's advanced features (MU-MIMO, OFDMA, TWT).
    • Move closer to your Wi-Fi router to improve signal strength.
    • Update your computer's operating system to the latest version.
  • Cannot Connect to Wi-Fi Network:
    • Double-check the Wi-Fi password.
    • Restart your router and computer.
    • Ensure the adapter's driver is correctly installed (blinking white light).
    • Temporarily disable any firewall or antivirus software to see if it's interfering.
  • Hotspot (Launch Mode) Not Working:
    • Ensure your computer has an active internet connection.
    • Verify that your Windows 10/11 system's Mobile Hotspot feature is enabled and configured correctly.
    • Some network configurations or VPNs might interfere with hotspot functionality.

8. User Tips

  • Optimal Performance: For the best wireless performance, always plug the adapter into a USB 3.0 port on your computer.
  • Router Compatibility: To fully utilize advanced features like MU-MIMO, OFDMA, and TWT, ensure your router is a Wi-Fi 6 compatible model.
  • Hotspot Functionality: The analog AP function (hotspot creation) is supported on Windows 10/11 systems. Ensure your system is up-to-date for stable operation.
  • Driver Management: While the adapter has a built-in driver for Windows 10/11, occasionally checking the UGREEN official website for updated drivers can ensure maximum compatibility and performance.

9. Warranty and Support

For detailed warranty information, technical support, and further assistance, please refer to the official UGREEN user manual PDF or visit the UGREEN Official Store website.

You can access the comprehensive user manual in PDF format here: UGREEN AX1800 WiFi Adapter User Manual (PDF)

For additional support, please contact UGREEN customer service or visit their official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.