1. Introduction
This manual provides detailed instructions for the installation and operation of your Road Top Wireless CarPlay Retrofit Kit. This kit integrates advanced smartphone connectivity features like Wireless CarPlay, Wireless Android Auto, AirPlay, and Mirroring into your Mercedes Benz's existing NTG5.0/5.1/5.2/5.5 system, while retaining all original vehicle functionalities.
The system supports control via the original car's buttons and steering wheel, offering a seamless user experience.
2. Safety Information
- Always ensure the vehicle is turned off and the battery is disconnected before performing any installation steps to prevent electrical damage or injury.
- If you are unsure about any part of the installation process, consult a qualified professional.
- Do not attempt to operate the system in a way that distracts you from driving. Always prioritize road safety.
- Ensure all cables are securely connected and routed to avoid interference with vehicle operation or passenger movement.
3. Package Contents
Verify that all items listed below are included in your package:

- CarPlay Decoder Box
- Power Cable Harness
- LVDS Cable
- USB-AV Cable
- Wi-Fi Antenna
- USB Adapter or Bluetooth Transmitter (Note: Random package, one of these will be included)
4. Setup and Installation
4.1. Compatibility Check
This kit is compatible with Mercedes Benz C-Class, GLC, and V-Class W447 models from 2015-2018 equipped with the NTG5.0/5.1/5.2/5.5 system. It is crucial to verify your car's original radio system and screen type before installation.

Screen Type Identification:

The main difference between a 7-inch screen (800*480 resolution) and an 8.4-inch screen (960*540 resolution) is that the 7-inch screen is typically not flat, while the 8.4-inch screen is flat and smooth.
4.2. Toggle Switch (DIP) Setup
The CarPlay decoder box features DIP switches that must be configured according to your car model and screen size. Incorrect settings can lead to display issues (black screen, flashing, half-screen).

DIP Switch Settings:
| Car Model | Screen Size / Resolution | DIP Switch Configuration |
|---|---|---|
| C-Class W205, GLC, V-Class W447 | 7 inch (800*480) | All switches OFF except switch 8 ON. (If this doesn't work, try switch 1 ON, others OFF) |
| C-Class W205, GLC, V-Class W447 | 8.4 inch (960*540) | All switches OFF except switch 7 ON. (If this doesn't work, try switch 1 ON, others OFF) |
| S-Class W222 | 12.3 inch | All switches OFF except switch 7 ON. (If this doesn't work, try switch 1 ON, others OFF) |
| A-Class, B-Class, CLA, GLA, E-Class, G-Class, GLE & GLS | 7 inch (800*480) | All switches OFF except switch 8 ON. (If this doesn't work, try switch 1 ON, others OFF) |
Note: When changing the toggle switch setup, you need to reconnect the CAN cable and restart the car engine for the changes to take effect.
4.3. Dashboard Removal
Accessing the head unit requires careful removal of dashboard components. Detailed video guides are available via QR codes for specific models:
- For C-Class W205 & GLC: Scan the QR code in the original PDF manual (Page 8).
- For S-Class W222: Scan the QR code in the original PDF manual (Page 8).
- For E-Class: Scan the QR code in the original PDF manual (Page 8).
- For A-Class, CLA, GLA: Scan the QR code in the original PDF manual (Page 8).
- For B-Class: Scan the QR code in the original PDF manual (Page 8).
4.4. Cable Connection
Follow the cable connection chart carefully. Incorrect LVDS cable connection will result in a black screen.


4.4.1. Power Cable Connection:
- Unplug the OEM original power cable from the head unit and reconnect it to the new cable harness.
- Plug the new cable from the harness into the head unit.
- If your car has a fiber optic cable, move the original fiber optic cable from the OEM power cable to the new power cable harness.

4.4.2. LVDS Cable Connection:
- Connect the new LVDS cable 1 to the 'DISP' (LVDS) port of the OEM head unit.
- Connect the new LVDS cable 2 to the original LVDS cable.
The 'DISP' port, also known as the LVDS port, is typically blue and located behind the head unit.

4.4.3. WiFi Antenna and USB-AV Cable Connection:
- Connect the Wi-Fi antenna to the decoder box. Ensure it is not placed near metal objects to avoid signal loss.
- Connect the USB-AV cable to the decoder box.
4.4.4. Bluetooth Transmitter Cable Connection:
- Connect the Bluetooth transmitter cable to the decoder box. A green light will illuminate, and a blue light will flash when connected successfully.
4.4.5. CarPlay Box Placement:
The CarPlay interface decoder box should be installed in an appropriate space near the OEM head unit or in the glove box.
5. Operating Instructions
5.1. System Switching
After all cables are connected, you can switch between the original Mercedes system and the CarPlay interface by long-pressing the '★' button on the car's center console handwriting mouse.


5.2. CarPlay / Android Auto Functions
The kit supports Wireless/Wired CarPlay and Android Auto, allowing you to use your smartphone apps on the car screen.

Key Features:
- Navigation: Use mainstream map applications like Google Maps, Waze, Apple Maps, NAVER Map, and T Map.
- Music Playback: Access various music apps such as Spotify, YouTube Music, Tidal, and Amazon Music.
- Phone Calls: Make and receive calls hands-free.
- Voice Control: Utilize Siri on CarPlay or Google Assistant on Android Auto for hands-free operation.
- AirPlay / AutoLink: Wireless/Wired AirPlay for iOS phones and Wired AutoLink for Android phones to cast your phone screen to the car display.
- HD Function: Connect TV Box, Notebook, DVD Player, or other devices via HD input (available on black color CarPlay Decoder).
- YouTube Play: Enjoy YouTube videos directly on your car's screen.

5.3. Camera Functionality
The system supports original factory reverse cameras, aftermarket reverse cameras, 360-degree cameras, and front view camera DVR (CVBS input).

When you put the gear from "R" to "D", the unit automatically switches to display the front view. This function is useful for drivers to see if there is any obstacle at the dead corner in front of the car after reversing.
5.3.1. Original OEM Camera Setup
Navigate to the 'Setup' menu, then 'Reverse', and set 'Reverse Camera' to 'Original'. For automatic transmission cars, ensure 'Reverse line detect', 'Reverse display track', and 'Reverse display radar' are all 'off'. For manual transmission cars, set 'Reverse line detect' to 'on' and the others to 'off'.
If using a manual transmission car with 'Reverse line detect' set to 'on', you need to connect the "Back/Reverse detect" wire to your car's reverse lamp positive (+12V).
5.3.2. Aftermarket Reverse Camera Setup
Navigate to the 'Setup' menu, then 'Reverse', and set 'Reverse Camera' to 'Aftermarket'. For automatic transmission cars, ensure 'Reverse line detect', 'Reverse display track', and 'Reverse display radar' are all 'off'. For manual transmission cars, set 'Reverse line detect' to 'on' and the others to 'off'.


5.3.3. Front View Cameras
In the 'Reverse' settings, adjust the 'Front View Time' between 1 to 15 seconds. If a front view camera is not installed, set this to 0 seconds.

6. CarPlay Sound Setup
There are two primary methods for sound transmission to the car audio system: Bluetooth transmission and phone Bluetooth output.
6.1. Bluetooth Transmission (via Bluetooth Transmitter)
- If your phone is already connected to your car's Bluetooth, disconnect it.
- In the CarPlay decoder's main menu, go to 'Setup' > 'Audio output channel' and select 'Transmitter BT'.
- Pair the Bluetooth transmitter (named 'DC_AUDIO_BT-****') to your car's OEM Mercedes Bluetooth.
- Once paired, ensure the green and blue lights on the transmitter are on.
- Keep the original OEM Mercedes system on the Bluetooth audio page. Long-press the '★' button on the car console mouse to enter the CarPlay interface and enjoy CarPlay/Android Auto.
6.2. Phone Bluetooth Output
This mode supports CarPlay, Android Auto, and Bluetooth calls. USB/SD card music/video sound output and mirrored sound output are not supported in this mode.
- Disconnect the Bluetooth transmitter.
- In the CarPlay decoder's main menu, go to 'Setup' > 'Audio output channel' and select 'Use Car's BT Channel'.
- Pair your phone's Bluetooth to the OEM Mercedes Bluetooth.
- Once paired, keep the original OEM Mercedes system on the Bluetooth audio page. Long-press the '★' button on the car console mouse to enter the CarPlay interface and enjoy CarPlay/Android Auto.
7. Maintenance
- Keep the CarPlay decoder box and all connections free from dust and moisture.
- Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
- Regularly check cable connections to ensure they remain secure.
- Clean the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
8. Troubleshooting
8.1. Display Issues (Black Screen, Flash Screen, Half-Screen)
These issues often arise from incorrect DIP switch settings. Refer to Section 4.2 for correct configurations. After adjusting DIP switches, always reconnect the CAN cable and restart the car engine.

8.2. No Sound During CarPlay Function
This is a common issue. Ensure the original fiber optic cable is correctly moved to the CarPlay source power cable as detailed in Section 4.4.1. Also, verify your sound output settings in Section 6.
8.3. Siri Activation
There are two ways to activate Siri:
- Use the Voice Control button on the steering wheel.
- Long-press the confirm button on the knob controller.

8.4. Steering Wheel Control Buttons
The CarPlay interface decoder box supports the Voice Control button, the Telephone button, and the volume “+” and “-” buttons. Other buttons on the steering wheel are not supported.

9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Road Top |
| Din | One Din |
| Voltage | 12 V |
| Item Weight | 1kg |
| Item Size | 150*100*23 mm |
| Output Type | Colored |
| Special Features | Built-In Speaker/Microphone, Wi-Fi function, Support steering wheel control, Support 3G/4G Network, Built-in GPS, Mobile Phone connectivity |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), German, Russian, Korean, Japanese, Turkish, Italian, English |
| Display Size | 2.5" (referring to the decoder box's internal display capability, not car screen) |
| Origin | Mainland China |
| For Vehicle Brands/Model | Mercedes-Benz |
| Certification | CE |
| Fit | for Mercedes Benz NTG5.0 C GLC CLA GLA Class |
| Support 1 | Wireless CarPlay |
| Support 2 | Wireless Android Auto |
| Support 3 | Wireless/Wired Carplay & Android Auto |
| Support 4 | Camera & Mirror Link Function |
| Support 5 | Factory and aftermarket camera |
| Support 6 | Front view camera DVR (CVBS input) |
| Style | Wireless carplay android |
| Support 7 | Reverse Camera |
| Support 8 | Original Car Knob Control |
| Support | USB player |
10. User Tips
- Audio Troubleshooting: If you experience no audio after installation, double-check the fiber optic cable connection as detailed in the power cable section (Section 4.4.1) and ensure your sound output settings are correctly configured (Section 6).
- Firmware Updates: For optimal performance and compatibility with the latest iOS/Android versions, regularly check for firmware updates. Contact customer support for information on where to download and how to install these updates.
- DIP Switch Settings: If the initial DIP switch settings don't work, try the alternative settings mentioned in Section 4.2 for your specific car model and screen size. Remember to restart the car engine after any DIP switch changes.
11. Warranty and Support
For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller directly through your purchase platform. When contacting support, please provide the following information to expedite assistance:
- Your order ID
- Car model and year
- Car screen size
- Current DIP switch setup
- Pictures of the LVDS cable connection
- Software version (found in the CarPlay decoder menu: 'Setup' > 'System Version')
A PDF version of this user manual is available for download: User Manual (PDF)