1. Introduction
The Mars Gaming ML-ONE360 is a high-performance CPU liquid cooling system designed to provide exceptional thermal management for your processor. It features an innovative infinity mirror FRGB lighting effect, a powerful OPTI-CHAMBER pump, three silent FDB FRGB fans, and a low-resistance radiator, capable of handling up to 550W TDP. This manual provides essential information for the proper installation, operation, and maintenance of your ML-ONE360 cooler.
Figure 1: Mars Gaming ML-ONE360 liquid cooling system overview.
2. Setup and Installation
Careful installation is crucial for optimal performance and longevity of your liquid cooling system. Please follow these general guidelines. Refer to the specific mounting hardware instructions included with your product for detailed steps for your CPU socket type.
2.1 Component Identification
Before beginning, identify all components:
- Radiator with pre-attached fans (3x FDB FRGB fans)
- Pump/Cold Plate assembly with integrated infinity mirror FRGB lighting
- 400mm Teflon tubes connecting the pump to the radiator
- Mounting brackets and hardware for various Intel and AMD sockets
Figure 2: ML-ONE360 liquid cooling system components.
2.2 Radiator and Fan Installation
- Determine the optimal mounting location for the 360mm radiator within your PC case. Common locations include the top or front panel.
- Secure the radiator to the case using the provided screws. Ensure adequate airflow.
- The three FDB FRGB fans are typically pre-installed on the radiator. If not, attach them to the radiator, ensuring the airflow direction is appropriate for your case's cooling strategy (intake or exhaust).
2.3 Pump/Cold Plate Installation
- Select the correct mounting bracket for your CPU socket (Intel or AMD).
- Attach the chosen bracket to the pump/cold plate assembly.
- Apply a thin, even layer of thermal paste to the CPU's integrated heat spreader (IHS).
- Carefully place the pump/cold plate assembly onto the CPU, aligning it with the mounting holes.
- Secure the pump to the motherboard using the appropriate standoffs and thumb screws, tightening in a cross pattern until snug.
2.4 Tube Management
The ML-ONE360 features 400mm extra-long Teflon tubes, offering flexibility for installation in various case sizes and configurations. Route the tubes carefully to avoid kinks or excessive bending, which can impede coolant flow.
Figure 3: Flexible 400mm Teflon tubes for versatile installation.
2.5 Cable Connections
- Connect the pump's power cable to an available CPU_FAN or AIO_PUMP header on your motherboard.
- Connect the fan cables to available fan headers on your motherboard or a fan controller.
- Connect the FRGB lighting cables from the pump and fans to a compatible FRGB header on your motherboard or a dedicated FRGB controller.
2.6 Universal Multisocket Compatibility
The ML-ONE360 is designed for broad compatibility with both Intel and AMD platforms:
- Intel: LGA 2066 / 2011 / 1700 / 1200 / 1156 / 1155 / 1151 / 1150
- AMD: sTRX4 / sTR4 / SP3 / AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
Figure 4: Universal multisocket support for various CPU platforms.
3. Operating Instructions
Once installed, the ML-ONE360 operates automatically to cool your CPU. Ensure all power and lighting connections are secure.
3.1 Cooling Performance
The ML-ONE360 utilizes an advanced OPTI-CHAMBER pump design and a professional low-resistance radiator to efficiently dissipate heat, supporting CPUs with a Thermal Design Power (TDP) of up to 550W. The FDB (Fluid Dynamic Bearing) fans provide stable and quiet operation while moving significant airflow.
3.2 FRGB Lighting
The cooling block features a multi-layer infinity mirror with FRGB illumination, creating a mesmerizing depth effect. The fans also display spectacular 360-degree FRGB lighting. Please note that the lighting is a fixed Rainbow RGB effect, and the colors do not vary or change position dynamically.
Figure 5: Close-up of the ML-ONE360 pump with infinity mirror FRGB lighting.
Video 1: Demonstration of the Mars Gaming ML-ONE360 liquid cooling system in operation, showcasing its FRGB lighting.
4. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your liquid cooling system.
- Dust Cleaning: Periodically clean the radiator fins and fan blades to prevent dust buildup, which can restrict airflow and reduce cooling efficiency. Use compressed air or a soft brush.
- Tube Inspection: Visually inspect the Teflon tubes for any signs of wear, kinks, or leaks. While Teflon is highly durable, regular checks are recommended.
- Pump Check: Listen for any unusual noises from the pump, which could indicate an issue. The OPTI-CHAMBER pump is designed for quiet operation.
5. Troubleshooting
If you encounter issues with your ML-ONE360 cooler, consider the following common troubleshooting steps:
- No Power/No Lights: Ensure all power cables (pump, fans, FRGB) are securely connected to the motherboard headers or controller. Check your motherboard's BIOS/UEFI settings to ensure fan headers are enabled and configured correctly.
- High CPU Temperatures: Verify that the pump is running (you might feel a slight vibration or hear a faint hum). Ensure the cold plate is making proper contact with the CPU and that thermal paste was applied correctly. Check for dust buildup on the radiator and ensure fans are spinning.
- Excessive Noise: If fans are noisy, check for obstructions or loose mounting. If the pump is noisy, ensure it's receiving adequate power and is mounted securely.
- No FRGB Lighting: Confirm FRGB cables are correctly connected to a compatible header. Check any associated software for lighting control.
If problems persist after these checks, please contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MARS GAMING |
| Model Number | ML-ONE360 |
| Type | Liquid CPU Cooler |
| TDP (Thermal Design Power) | Up to 550W |
| Pump Power | 550W |
| Material | Aluminum (Radiator) |
| RGB Support | FRGB (Fixed Rainbow RGB) |
| Weight | 1325g |
| Dimension (Radiator) | 397x120x27mm |
| Fan Size | 120 MM (x3) |
| Tubes | 400mm Teflon |
| Origin | ES (Spain) |
| Certification | CE |
7. User Tips
- Pre-fit Components: Before applying thermal paste or fully securing components, it's often helpful to 'dry fit' the radiator and pump to ensure proper clearance within your PC case and to plan your cable routing.
- Thermal Paste Application: Use a high-quality thermal paste and apply it sparingly. A small pea-sized dot in the center of the CPU is usually sufficient, as the pressure from the cold plate will spread it evenly.
- Cable Management: Take time to manage your cables neatly. This not only improves the aesthetic of your build but also enhances airflow within the case, contributing to better overall cooling.
8. Warranty and Support
The Mars Gaming ML-ONE360 liquid cooling system comes with a 3-year warranty. For any technical assistance, warranty claims, or support inquiries, please contact the seller or Mars Gaming customer service directly. Ensure you retain your proof of purchase for warranty validation.
