GWNOWZZET LED Cargo Bed Lighting Kit

Contents

GWNOWZZET LED Cargo Bed Lighting Kit Instruction Manual

For Toyota Tundra & Tacoma (2015-2021)

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GWNOWZZET LED Cargo Bed Lighting Kit. Designed specifically for Toyota Tundra and Tacoma models from 2015 to 2021, this kit enhances visibility in your truck bed, making cargo management easier in low-light conditions.

GWNOWZZET LED Cargo Bed Lighting Kit components

Image: Complete GWNOWZZET LED Cargo Bed Lighting Kit showing lights, wiring harness, connectors, screws, and zip ties.

Specifications

FeatureDetail
Voltage12V DC
Lens ColorWhite
LED Bulbs per Assembly6 pieces
PositionRear, Left, Right (Inner bed wall)
Fitment TypeDirect Replacement
Waterproof RatingIP67
Manufacturer Part Number00016-34187
Interchange Part Number00016-34089
Package Contents1*Driver’s Side LED assembly, 1*Passenger Side LED assembly, 1*Wire-harness, 1*Hardware Kit
MaterialHigh-quality plastic shell, PC cover, durable bellows for wiring
Detailed specifications table for the LED cargo bed lighting kit

Image: Table showing detailed product specifications including voltage, LED count, waterproof rating, and part numbers.

Setup and Installation

This LED Cargo Bed Lighting Kit is designed for direct replacement and easy installation. Ensure your vehicle is turned off and the battery is disconnected before beginning installation.

Package Contents:

  • 2 x LED Light Assemblies (Driver's Side and Passenger Side)
  • 1 x Wire Harness with Fuse
  • Hardware Kit (Stainless steel screws M4x12mm, Wire Ties, 22-18 AWG T-Tap (Red), Connector Body, Connector Retention Clip)
Components of the LED cargo bed lighting kit including lights, wiring, and connectors

Image: Close-up of the kit components, highlighting the LED lights, wiring harness, and various connectors and fasteners.

Installation Steps:

  1. Locate Mounting Points: The LED lights are designed to be mounted on the inner bed wall, near the rear of the cargo area. Refer to your vehicle's manual for specific access points if needed.
  2. Prepare Wiring: The kit includes a wire harness with sufficient length and a fuse for protection. Identify the power source (12V DC) in your vehicle.
  3. Connect Lights: Connect each LED light assembly to the wire harness using the provided connectors. Ensure secure connections.
  4. Mount Lights: Secure the LED light assemblies using the stainless steel screws (M4x12mm) and mounting bezels.
  5. Route Wiring: Route the wire harness safely, away from moving parts or heat sources. Use the provided wire ties to secure the harness. The high-quality bellows protect the wires from damage.
  6. Connect to Power: Use the T-Tap connectors to tap into a 12V DC power source. Ensure proper polarity (red wire for positive, black for negative).
  7. Test Functionality: Reconnect the vehicle battery and test the lights to ensure they function correctly.
Detailed view of the wiring harness with fuse and connectors

Image: Close-up showing the wiring harness, fuse, and various connectors for installation.

Close-up of one LED light assembly with its coiled wire

Image: A single LED light assembly with its coiled wire, demonstrating the "long enough wire" and IP65 waterproof rating.

Operating Instructions

Once installed, the LED Cargo Bed Lighting Kit operates by providing bright illumination to your truck bed. The lights are designed to activate when connected to a suitable 12V DC power source, typically linked to your vehicle's existing cargo light switch or a dedicated switch (if installed during setup).

  • Activation: Turn on the lights using the designated switch in your vehicle.
  • Visibility: The super bright 6 LED bulbs per assembly provide excellent light distribution, improving visibility for loading and unloading cargo at night or in dark environments.
  • Power Consumption: The LED bulbs are designed for low power consumption, ensuring minimal impact on your vehicle's battery.
Truck bed illuminated by the LED cargo lights

Image: A truck bed brightly illuminated by the installed LED cargo lights, demonstrating their effectiveness in dark conditions.

Maintenance

The GWNOWZZET LED Cargo Bed Lighting Kit is built with durable, high-quality materials for long-lasting performance. Minimal maintenance is required.

  • Cleaning: Periodically clean the LED light lenses with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the PC cover.
  • Inspection: Regularly inspect the wiring harness and connections for any signs of wear, damage, or corrosion. Ensure all connections remain secure.
  • Waterproof Rating: The lights have an IP67 waterproof rating, protecting them from dust and immersion up to 1 meter. However, avoid high-pressure washing directly on the light assemblies.
  • Fuse Check: If the lights stop working, check the fuse in the wiring harness and replace it if necessary with a fuse of the same rating.

Troubleshooting

If you encounter issues with your LED Cargo Bed Lighting Kit, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lights do not turn on.No power, blown fuse, loose connection, incorrect wiring.Check vehicle's power source. Inspect the fuse in the wiring harness and replace if blown. Verify all electrical connections are secure and wiring polarity is correct.
Lights flicker or are dim.Poor electrical connection, low voltage, damaged wiring.Ensure all connections are tight. Check vehicle's battery voltage. Inspect wiring for any cuts or damage.
Only one light works.Faulty light assembly, wiring issue to one light.Check the connections to the non-working light. If connections are good, the light assembly may be faulty and require replacement.

User Tips

  • Pre-Installation Check: Before final installation, connect the lights to a 12V power source to ensure they are working correctly.
  • Wire Management: Take your time to properly route and secure the wiring harness using the provided zip ties. This prevents damage and ensures a clean installation.
  • Professional Installation: If you are uncomfortable with electrical work, consider having the kit installed by a qualified automotive technician.

Warranty and Support

For warranty information or technical support, please refer to the seller's contact information or the product packaging. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.