1. Introduction
The X Autohaux Tire Pressure Monitoring System (TPMS) is designed to enhance driving safety by providing real-time monitoring of your RV or trailer's tire pressure and temperature. This system features 7 distinct alarm modes, an auto-backlight display, and intelligent sleep/awake functionality to conserve power. It is suitable for various 4-wheel vehicles, including cars, ORVs, SUVs, sedan cars, and wagons, and its sensors are built to be waterproof, dustproof, and resistant to high temperatures.
2. Package Contents
Please check the package carefully to ensure all items are present and undamaged:
- 1 x Tire Pressure Monitoring System (Monitor)
- 6 x External Sensors
- 6 x Anti-lost Nuts
- 1 x Repeater
- 1 x Wrench (for sensor installation)
- 1 x USB Cable (for monitor charging)
- 1 x Sticker (for monitor mounting)
- 1 x User Manual (this document)
3. Product Overview
The system consists of a main display unit (monitor), external tire pressure sensors, and a signal repeater for extended range, especially useful for RVs and trailers.
3.1 Monitor Features
- Display: LCD screen showing real-time tire pressure and temperature.
- Charging: Integrated solar panel and USB charging port.
- Controls: 'Select' and 'Setting' buttons for navigation and adjustments.
- Indicators: Displays tire temperature, battery power, pressure unit, and tire pressure.
- Cooling: Features a cooling vent for optimal performance.
3.2 Sensor Features
The external sensors are designed for easy installation and durability, providing accurate readings to the monitor.
3.3 Repeater
The repeater boosts the signal from the sensors to the monitor, ensuring stable and reliable data transmission over longer distances, crucial for multi-vehicle setups like an RV towing a trailer.
4. Specifications
| Feature | Specification |
|---|---|
| Color | Black |
| Material | ABS |
| Monitor Dimension (L*W*H) | 11 x 8.4 x 2.9 cm (4.33" x 3.31" x 1.14") |
| Sensor Size (H*D) | 1.8 x 2.3 cm (0.71" x 0.91") |
| Sensor Inner Thread Diameter | 7 mm (0.28") |
| Frequency | 433.92MHz ± 20.00MHz |
| Working Voltage | 3.7V |
| Storage Temperature | -20℃ to 85℃ |
5. Setup Guide
5.1 Monitor Installation
- Choose a suitable flat surface on your dashboard that does not obstruct your view or interfere with airbags.
- Clean the chosen surface thoroughly.
- Attach the provided sticker to the bottom of the monitor and then firmly press the monitor onto the dashboard.
- Ensure the solar panel on top of the monitor is exposed to sunlight for optimal charging.
5.2 Sensor Installation
Install the external sensors on your tires following these steps:
- Remove the original valve cap from each tire.
- Screw an anti-lost nut onto the valve stem.
- Screw the corresponding sensor (labeled A, B, C, D, etc.) onto the valve stem. Ensure it is tightened securely.
- Tighten the anti-lost nut against the sensor using the provided wrench to prevent theft and ensure a secure fit.
- Repeat for all tires.
5.3 Repeater Installation (for RV/Trailer)
For longer vehicles like RVs or trailers, the repeater is essential for maintaining a strong signal between the sensors and the monitor.
- Identify a central location on your RV or trailer, preferably away from large metal objects that could block the signal.
- Mount the repeater securely using appropriate fasteners (not included, depending on mounting surface).
- Connect the repeater to a 12V power source. Ensure the wiring is protected from weather and road debris.
- Test the signal strength by driving a short distance and observing the monitor readings. Adjust repeater placement if signal is weak or intermittent.
6. Operating Instructions
6.1 Charging the Monitor
The monitor supports dual charging methods:
- Solar Charging: The integrated solar panel charges the monitor automatically when exposed to sunlight. This is the primary charging method during normal operation.
- USB Charging: In cloudy or rainy weather, or if the battery is low, you can charge the monitor using the provided USB cable. Connect the USB cable to the monitor's USB charging port and a suitable USB power source.
6.2 Monitoring and Alarm Modes
The system provides real-time monitoring and alerts for various tire conditions:
- Leakage Warning: Alerts you to a rapid drop in tire pressure.
- High Pressure Warning: Notifies you if tire pressure exceeds a safe limit.
- Low Pressure Warning: Warns of insufficient tire pressure.
- High Temperature Warning: Indicates if a tire's temperature becomes dangerously high.
- Sensor Battery Low Power Warning: Alerts when a sensor's battery is running low.
- Additional alarm modes may include rapid pressure drop and sensor fault.
6.3 Adjusting Settings
Use the 'Select' and 'Setting' buttons on the monitor to navigate through menus and adjust parameters such as:
- Pressure Unit (e.g., PSI, Bar)
- Temperature Unit (e.g., ℃, ℉)
- High/Low Pressure Alarm Thresholds
- High Temperature Alarm Threshold
Refer to the on-screen prompts for specific instructions on changing each setting.
7. Maintenance
- Cleaning: Regularly wipe the monitor and sensors with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals.
- Sensor Batteries: The external sensors have internal batteries. When a 'Sensor Battery Low Power Warning' appears, the sensor may need replacement or professional servicing.
- Monitor Battery: Ensure the monitor is regularly exposed to sunlight or charged via USB to maintain its battery level.
8. Troubleshooting
- No Signal from Sensors:
- Ensure sensors are correctly installed and tightened.
- Check if the repeater (if used) is powered on and correctly positioned, especially for long vehicles like RVs/trailers.
- Verify that the monitor is within range of the sensors/repeater.
- Inaccurate Readings:
- Re-check tire pressure with a reliable manual gauge.
- Ensure sensors are clean and free from debris.
- Recalibrate or re-pair sensors if the option is available in the monitor settings.
- Monitor Not Charging:
- Ensure the solar panel is clean and exposed to direct sunlight.
- Check the USB cable and power source if charging via USB.
- Repeater Not Working:
- Verify the repeater is receiving power (e.g., 12V connection).
- Check all connections and wiring.
9. User Tips
- Repeater Placement for Caravans/Trailers: When installing on a caravan or trailer, consider placing the repeater centrally or closer to the rear tires to ensure optimal signal transmission to the monitor in the towing vehicle. Experiment with placement to find the best signal strength.
- Regular Checks: Even with a TPMS, it's good practice to periodically check tire pressure with a manual gauge to confirm accuracy and for general tire health.
- Pre-Trip Inspection: Before long trips, ensure your TPMS monitor is fully charged and all sensors are reporting correctly.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or on the manufacturer's official website. Keep your purchase receipt as proof of purchase.