Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of original replacement accessories for the Lydsto G2 YM-G2D-W03 Robot Vacuum Cleaner. These accessories are designed to ensure your robot vacuum maintains optimal cleaning performance.
Setup and Installation
Follow these steps to correctly install or replace the accessories in your Lydsto G2 YM-G2D-W03 robot vacuum cleaner. Ensure the robot is powered off before performing any installation or maintenance.
Water Tank and Mop Cloth Installation:
- Remove Water Tank: Press the two clips on the water tank and carefully pull it out from the robot.
- Fill Water Tank: Open the cover of the water tank and pour clean water into it.
- Attach Mop Cloth: Securely attach the mop cloth to the designated area on the water tank.
- Reinstall Water Tank: Slide the water tank back into the robot until it clicks into place.
Dust Box and Filter Installation:
- Remove Dust Box: Open the cover of the dust box compartment and take out the dust box.
- Clean Dust Box: Empty any accumulated garbage from the dust box and clean it thoroughly.
- Install Filter: Place the new filter securely into the dust box.
- Reinstall Dust Box: Slide the dust box back into the robot until it is properly seated.
Main Brush Installation:
- Remove Main Brush: Open the cover of the main brush compartment and take out the main brush.
- Clean Main Brush: Remove any hair or debris tangled around the main brush.
- Reinstall Main Brush: Place the main brush back into its compartment and close the cover securely.
Side Brush Installation:
- Remove Side Brush: Gently pull or unscrew the old side brush from its position.
- Clean Side Brush: Remove any hair or debris from the side brush.
- Reinstall Side Brush: Attach the new side brush, ensuring it is firmly in place.
Operating Considerations
Once the accessories are correctly installed, your Lydsto G2 YM-G2D-W03 robot vacuum cleaner is ready for operation. Ensure all parts are securely fitted to prevent operational issues or reduced cleaning efficiency. The robot vacuum will automatically utilize the installed accessories for its cleaning cycles.
Maintenance
Regular maintenance of your robot vacuum accessories is crucial for optimal performance and longevity. Refer to the installation steps for cleaning procedures.
- Dust Box: Empty and clean the dust box after each cleaning cycle or as needed.
- Filter: Clean the filter regularly (e.g., weekly) by tapping out dust. Replace the filter every 1-3 months, depending on usage and environment, to maintain suction power and air quality.
- Main Brush: Inspect and clean the main brush weekly, removing tangled hair and debris. Replace the main brush every 6-12 months.
- Side Brushes: Inspect and clean side brushes weekly, removing tangled hair. Replace side brushes every 3-6 months if they become worn or bent.
- Mop Cloths: Wash mop cloths after each use. Replace disposable mop cloths after each use. Reusable mop cloths should be replaced every 1-3 months, depending on wear.
Troubleshooting
If your robot vacuum is not performing as expected after replacing accessories, consider the following:
- Reduced Suction: Check if the dust box is full or if the filter is clogged. Ensure the filter is correctly installed.
- Poor Cleaning Performance: Verify that the main brush and side brushes are free of tangles and installed correctly. Mop cloths should be clean and properly attached.
- Unusual Noises: Inspect all brushes for foreign objects or damage. Ensure they are securely installed.
- Water Leakage: Confirm the water tank cover is tightly closed and the tank is correctly seated in the robot.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | G2 YM-G2D-W03 |
| Brand Name | Lydsto (Compatible with Lydsto G2) |
| Type | Vacuum Cleaner Parts |
| Material (Side Brush) | Silicone |
| Vacuum Part Type | Mop Cloths, Filters, Side Brushes, Main Brushes, Dust Bags |
| High-concerned chemical | None |
| Origin | Mainland China |
User Tips
To maximize the lifespan and effectiveness of your Lydsto G2 YM-G2D-W03 accessories:
- Always keep spare filters and brushes on hand for timely replacements.
- For heavily soiled areas, consider pre-sweeping or running the vacuum twice.
- Ensure mop cloths are thoroughly cleaned and dried before reuse to prevent mildew and odors.
- Periodically check the main brush and side brushes for hair entanglement, especially if you have pets.
Warranty and Support
For any questions regarding the accessories or their compatibility, please contact the seller or manufacturer directly. Keep your purchase records for any warranty claims or support inquiries.
