1. Introduction
The Fcar FD505S is an advanced suspended 5D wheel aligner system designed for professional automotive repair. It utilizes cutting-edge 5D technologies with 5 high-definition cameras to provide fast, accurate, and reliable wheel alignment data. Its innovative suspended design eliminates the need for a cabinet, beam, or dedicated PC, making it a space-saving and permanently installable solution for workshops using 2-post lifts.
This system supports multiple languages, ensuring accessibility for a wide range of users. The FD505S is operated via a robust F7S tablet with self-developed software, offering an intuitive interface for comprehensive alignment procedures.

Figure 1: Fcar FD505S Suspended Wheel Aligner System in operation, highlighting its compact design without a cabinet, beam, or PC.
2. Package Contents
Please verify that all items listed below are included in your package. If any components are missing or damaged, please contact customer support immediately.

Figure 2: Visual representation of the full package set.
Included Components:
| Component | Description |
|---|---|
| Aligner unit | Main camera and sensor unit. |
| F7S tablet | Dedicated tablet for system operation and display. |
| Four-jaw clamp | Used to attach targets to vehicle wheels. |
| Steering wheel holder | Secures the steering wheel during alignment. |
| Brake holder | Holds the brake pedal during alignment procedures. |
| Holder set | Mounting hardware for the aligner unit. |
| Spirit level | For ensuring level installation. |
| DC power adaptor | Power supply for the aligner unit. |
| 12V power adaptor | Power supply for the F7S tablet. |
| Square targets | Reflective targets attached to wheels for measurement. |
Note: Turn plates are not included in this package and may need to be acquired separately if required for your alignment procedures.
3. Setup
The FD505S features a breakthrough suspended design for quick and easy installation on 2-post car lifts. This design ensures no waste of floor space and allows for permanent installation.
3.1 Installation Overview
The aligner units are fixed in holders installed on 2-post car lifts. The system is designed to be compact and easy to install, with the aligner set typically installed in less than 30 minutes. Once fixed, there is no need to move it at each alignment process.

Figure 3: Suspended design for 2-post lifts, highlighting space efficiency and permanent installation.

Figure 4: Installation height guide. Ensure the aligner units are mounted within the specified range (MIN 2.4m, MAX 2.9m).
3.2 Initial Preparation
- Mount the aligner units securely on your 2-post lift posts according to the installation guide diagram (Figure 4), ensuring they are within the specified height range.
- Connect the DC power adaptor to the aligner unit and the 12V power adaptor to the F7S tablet.
- Ensure the F7S tablet is fully charged or connected to power.
- Power on the F7S tablet and the aligner unit.
3.3 Activation and Installation Video Guides
For detailed visual instructions on activation and installation, please refer to the official video guides:
- Activation Instruction: https://www.youtube.com/watch?v=Ikw2rVigf2w&t=22s
- Installation Instruction: https://www.youtube.com/watch?v=Ll7Ig6g-f9I&t=8s
4. Operation
The FD505S system is operated entirely via the F7S tablet, which features intuitive, self-developed software. The process is designed for efficiency, providing fast and accurate results.
4.1 General Workflow

Figure 5: Quick and easy setup and operation workflow.
- Prepare Vehicle: Position the vehicle on the lift. Attach the four-jaw clamps and square targets to each wheel. Use the steering wheel holder and brake holder as needed.
- Measure Angles (approx. 10 minutes): Launch the FD505S software on the F7S tablet. The system will guide you through the initial angle measurements.
- Select Vehicle (approx. 30 seconds): Choose the specific vehicle model from the extensive database within the software.
- Push Compensation (approx. 2 minutes): Perform video-speed imaging for roll-back compensation as instructed by the software. This ensures accurate measurements by compensating for any runout.
- Review Results: The software will display the test results, including various alignment parameters.
- Print Report (approx. 2 minutes): Generate and print a detailed alignment report.
- Make Adjustment: Perform necessary adjustments to the vehicle's alignment based on the live, real-time measurements provided by the system.
4.2 Software Interface and Features
The F7S tablet software provides a comprehensive and user-friendly interface for all alignment tasks. Key features include:
- Advanced Settings: Customize various parameters for specific alignment needs.
- Language Settings: Select from multiple supported languages (Arabic, Chinese, Czech, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, and more).
- Model Selection: Access a vast database of vehicle models for accurate specifications.
- Target Monitor: Real-time visual feedback on target positioning.
- Print Report: Generate detailed reports including wheel alignment, tire test, and chassis test results.
- Push Compensation: Guided process for precise compensation.
- Test Result & Wheel Data Display: Clear presentation of all measured and adjusted parameters.

Figure 6: Screenshots of the FD505S software interface on the F7S tablet.
The FD505S can also connect with Android TV sets for a synced display, useful for demonstration in workshops.
4.3 Operation Video Guide
For a comprehensive visual guide on operating the FD505S system, please refer to the official operation video:
- Operation Instruction: https://www.youtube.com/watch?v=1ehz7Mm0msY&t=7s
Video 1: Fcar FD505S Suspended Wheel Aligner System demonstration.
5. Maintenance
Proper maintenance ensures the longevity and accuracy of your FD505S system.
- Cleaning: Regularly clean the camera lenses and targets with a soft, lint-free cloth. Avoid abrasive cleaners that could scratch surfaces.
- Software Updates: Ensure your F7S tablet software is always up-to-date. The system features an online update system to provide the latest features and vehicle database information.
- Environmental Conditions: Operate and store the system in a clean, dry environment, away from extreme temperatures and direct sunlight.
- Cable Management: Keep all cables organized and free from damage to prevent interruptions during operation.
6. Troubleshooting
This section addresses common issues you might encounter with the FD505S system.
6.1 Common Issues and Solutions
- Inaccurate Readings:
- Ensure all targets are clean and securely attached to the wheels.
- Verify that the aligner units are correctly mounted and level.
- Perform the push compensation procedure accurately.
- Check for any obstructions between the cameras and targets.
- Software Not Responding:
- Restart the F7S tablet.
- Ensure the software is updated to the latest version.
- Check for sufficient battery charge on the tablet.
- Connection Issues (Tablet to Aligner Unit):
- Verify that both the tablet and aligner unit are powered on.
- Check wireless connections (if applicable) or ensure cables are securely connected.
If you encounter persistent issues, please refer to the operation video or contact Fcar customer support for assistance.
7. Specifications
7.1 Technical Parameters
| Parameter | Description / Value |
|---|---|
| Product Name | 5D Wheel Aligner |
| Brand | FcaR |
| Model | FD505S |
| Applicable Models | All Cars |
| Function | Tire Angle Calibration |
| Certification | CE, FCC |
| Support Language | Multi-language (Arabic, Chinese, Czech, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, etc.) |
| Origin | Mainland China |
7.2 Measurement Capabilities (Ground Test)

Figure 7: Basic and Extensive Functions for Ground Test.
| Category | Function |
|---|---|
| Basic Functions | Camber |
| Caster | |
| KPI | |
| Toe | |
| Setback | |
| Extensive Functions | Thrust |
| Rear axle yaw | |
| Wheel deviation | |
| Axis deviation |
7.3 Precision Parameters

Figure 8: Precision Parameters.
| Parameter | Precision | Variable |
|---|---|---|
| Toe | ±2' | ±20° |
| Camber | ±2' | ±10° |
| Caster | ±6' | ±20° |
| KPI | ±6' | ±20° |
| Setback | ±2' | ±5° |
| Thrust | ±2' | ±5° |
| Track width difference | ±2mm | N/A |
| Axle distance | ±2mm | N/A |
7.4 Physical Specifications
- Weight: 72.0 kg
- Package Dimensions (L x W x H): 100 cm x 60 cm x 80 cm
8. User Tips
Here are some helpful tips based on common user inquiries and experiences:
- Vehicle Compatibility: The FD505S is designed to support a wide range of vehicles, including European cars and all common car models.
- Lift Requirement: This system is specifically designed for use with 2-post car lifts. The vehicle must be lifted to perform alignment procedures effectively.
- Software Updates: Regularly check for and install software updates to ensure you have the latest vehicle database and system enhancements.
- Initial Setup: While setup is quick, take your time during the initial installation of the aligner units on the lift posts to ensure they are perfectly level and within the specified height range for optimal accuracy.
9. Warranty and Support
Fcar provides an online update system and database for the FD505S to ensure your device remains current with the latest vehicle models and software improvements.
For any technical questions, support, or warranty claims, please contact Fcar customer service directly through their official channels. Details for contacting support are typically found in the F7S tablet software or on the Fcar official website.