1. Introduction
The Staniot WiFi SecPanel 5 is a central hub for your home security system, featuring a 4.3-inch IPS capacitive touch screen. It integrates a high-performance, low-power intelligent microprocessor and includes a built-in siren with up to 105dB. The system supports various installation methods, including wall-mounted and desktop placement, and connects to a mobile application for remote control and monitoring.
1.1 Product Overview
The SecPanel 5 is designed to make home safety easier, offering a comprehensive solution for monitoring and protecting your property. It supports a wide range of accessories and provides real-time alerts.
1.2 Key Features
- Various Installation Methods: Can be placed directly on a desktop or wall-mounted.
- Built-in 105dB Siren: Loud and penetrating alarm to deter intruders.
- Longer Battery Life: Equipped with a 1500mAh lithium battery.
- 4.3-inch IPS Touch Screen: Capacitive touch screen with clear display and wide viewing angle.
- OTA Online Upgrade: Continuous system optimization and feature updates without extra fees.
- APP Remote Control: Arm/disarm, monitor, and manage accessories via mobile application.
- Voice Control: Compatible with Alexa & Google Assistant for hands-free operation.
- Support for 200 Accessories: Expandable system to cover all areas of your home.
- Built-in 10 Languages: Multi-language support including English, Spanish, French, German, etc.
2. Setup Guide
2.1 Security Panel Installation
The SecPanel 5 offers flexible installation options: desktop placement or wall mounting.
2.1.1 Wall Mount Installation
- Install the wall hanging plate on the desired wall using the provided screws. Ensure all screws are firmly nailed and the hanging board is parallel.
- Align the hole on the back of the panel with the hanging plate and securely install it. For concealed wire installations, remove the desktop bracket and cable clip first.
2.1.2 Desktop Placement
The panel comes with a stand on the back, allowing it to be placed directly on any desktop. This offers flexibility in placement without needing to drill holes.
Important Notes for Placement:
- Install the panel in the center of your home to optimize signal reception and transmission.
- Place the panel closer to your WiFi router for stable connection.
- Avoid installing devices on metal surfaces or load-bearing walls, as this can interfere with wireless signals.
2.2 Smart Life APP Setup
The Smart Life APP is essential for controlling and managing your security system remotely.
2.2.1 Download the APP
Turn on the security panel, select a language, and scan the QR code displayed on the panel to download the Smart Life APP. Alternatively, search "Smart Life" in your device's app store (Apple App Store or Google Play Store).
- For iOS users, scan the Apple APP QR code.
- For Android users, scan the Google Play QR code.
- After downloading, enable all usage permissions for the APP in your phone settings.
- Sign up or log in to your APP account.
2.2.2 Connect Panel to Smart Life APP
Note: This security panel supports 2.4GHz WiFi networks only. Ensure your router is correctly set up and connected to the internet. When adding the panel, enable WiFi and Bluetooth on your mobile phone and confirm it's connected to the 2.4GHz frequency band.
- For first-time use, connect the security panel to power and turn the backup battery switch to "ON". The operation guide interface will appear. If you are already in the main interface or need to reset WiFi, navigate to "Menu" > "Settings" > "WiFi" and enter the default user code: 1234.
- On the panel, press the "WiFi" icon to enter the operation guide interface.
- Press "Airlink" to enter the WiFi pairing mode.
- On the Smart Life APP, open the "Home" interface.
- Click the "+" icon in the upper right corner and select "Add Device".
- Press "Add" in the discovering device area, then select "Smart Security Panel".
- Input your 2.4GHz WiFi network name and password, then click "Next".
- Once successfully paired, the device will be added to your APP.
2.3 Setting up Security Devices (Accessories)
The system supports various accessories. Here's how to set them up:
2.3.1 Adding Devices via APP
- On the APP, go to "Accessories".
- Press the "+" button.
- Trigger the accessory (e.g., open an entry sensor, wave hand in front of motion sensor) to complete pairing.
2.3.2 Renaming Devices
Accessory names can be edited directly on the APP. Simply press the "Sub device name" to modify it.
2.3.3 Sharing Device
A security panel can be paired with one APP account. To allow other family members to manage it, you can share the device through the APP's sharing function.
2.3.4 Entry Sensor Installation
Entry sensors detect when a door or window is opened. Install them at important entrances.
- Clean the installation area on the door or window.
- Apply double-sided tape to the bottom of the sensor parts.
- Install the large transmitter and small magnet separately, ensuring the triangle marks on both parts face each other. The distance between them should be less than 0.6 inches (1.5 cm).
- When the door or window is opened after installation, the indicator light will illuminate for 2 seconds, confirming successful installation.
2.3.5 Motion Sensor Installation
Motion sensors detect movement within their detection area.
- Recommended installation height is 79-87 inches (2.0-2.2m) above the ground.
- Install in a corner or on a flat wall, ensuring no obstacles or blind spots.
- Avoid directly facing cold/hot vents or sources.
- To prevent false alarms, ensure pets cannot easily access the detection area.
2.3.6 Controller (Remote) Setup
The remote controller allows quick arming, disarming, and emergency alarm activation.
- On the Security Panel, go to "Menu" > "Accessories" > Enter User Code (Default: 1234).
- Select "Controller".
- Press "+" and then trigger the controller by pressing any key.
- Once paired, rename the controller on the APP.
2.3.7 Multifunction Button (Doorbell/SOS) Setup
This button can be configured as a doorbell or an SOS emergency button.
For Doorbell Function:
- On the Security Panel, go to "Menu" > "Accessories" > Enter User Code (Default: 1234).
- Select "Doorbell".
- Press "+" and then press the multifunction button.
- Once paired, rename the sensor on the APP.
For SOS Button Function:
- On the Security Panel, go to "Menu" > "Accessories" > Enter User Code (Default: 1234).
- Select "Sensor" > "+" > "Urgent", then set the Advanced setting.
- Press "+ Pair", then trigger the SOS button.
- Once paired, rename the SOS button on the APP.
3. Operating Instructions
3.1 Main Interface Overview
The main interface of the security panel displays time, date, and quick access to arming modes (Away, Home, Disarm), Log, and Menu.
3.2 System Status Indicators
| Icon | Status |
|---|---|
| Red Shield | System in alarm state |
| Orange Shield | System armed |
| Black Shield | System disarmed |
| Battery Icon | Accessories low battery |
| Door/Window Icon | Door/Window opened |
3.3 Alarm Modes
The security panel offers different arming modes:
- Away: The system is fully armed. If any accessory is triggered, the panel will alarm.
- Home: Some areas are monitored while others are not, suitable for when users are at home.
- Disarm: The system cancels monitoring. Only the SOS button or accessories set to "Always" mode can trigger an alarm.
Accessory Modes:
- Away/Home: The panel alarms if the sensor is triggered when the system is in "Away" or "Home" state. Recommended for outdoor sensors.
- Away: The panel alarms if the sensor is triggered only when the system is in "Away" state. Recommended for outdoor detectors.
- Always: The panel alarms whenever the sensor is triggered, regardless of the system's arming state. Recommended for gas leaks or smoke detectors.
- Disabled: The security panel will not respond to alarm requests from sensors set to this mode.
Note:
You can customize which sensors are armed in Home and Away mode. For example, to avoid triggering the alarm when you are at home, set specific sensors to "Away" mode. This way, the alarm will only trigger when the system is in "Away" state.
3.4 Phone and SMS Commands (For 2G/4G version only)
The system can send SMS messages and make calls to emergency numbers. (Note: This feature is for 2G/4G versions only. The WiFi version does not have a SIM card slot.)
3.4.1 Emergency Number Setup
In the "Phone" menu, you can set up emergency numbers. Ensure the phone number format is correct, including the area code if necessary (e.g., 00XX, OXX).
3.4.2 SMS/Phone Alarm Rules
When an alarm is triggered, the panel will first send SMS messages to the set numbers, then initiate calls. If a number doesn't answer after three attempts, the system will move to the next number. If one number answers, subsequent numbers will not be dialed.
3.4.3 SIM Card Unlock
If using a SIM card, ensure its PIN code is disabled on a phone first. Carriers usually set PINs like 1234 or 0000.
3.4.4 Arm/Disarm Panel by SMS Command (Firmware v1.0.20 or above)
The panel can be armed or disarmed via SMS commands from the phone number set in the panel's "Phone" > "Settings". Commands from other numbers will not be recognized.
| No. | SMS Command | Action Taken by the Panel | Replied SMS |
|---|---|---|---|
| 1 | away arm | The panel will be in "Away" mode | System armed! |
| 2 | stay arm | The panel will be in "Home" mode | System armed! |
| 3 | disarm | The panel will be in "Disarm" mode | System disarmed! |
3.5 Security Settings
Access security settings via the "Security" menu on the panel.
- Delay: Customize countdown times for arming and alarming.
- Code:
- User Code: Default is 1234.
- System Code: Default is 9876.
- Obfuscated Code: Enter 5 to 8 digits, containing the correct 4 digits in succession.
- Password Validity Period: After selection, the password is not needed for 2 minutes when the screen is on.
- Alarm:
- Local Alarm: Enable/disable panel alarm sound.
- Siren Alarm: Enable/disable external siren sound.
- Siren Beep: Enable/disable siren beep when arming/disarming.
- Delay Beep: Choose whether to sound a beep during arm or alarm countdown.
3.6 General Settings
Access general settings via the "Settings" menu on the panel.
- WiFi: Connect to the APP to configure the network or change the APP user.
- Time: Set the time and adjust the date display format.
- Audio: Adjust volume, turn on/off Key beep, Voice tone.
- Display: Set screen time and brightness.
- Language: Select from English, Deutsche, Русский, Español, Italiano, Polskie, Français, Português, Nederlands, 简体中文.
- Recover: Restart or reset the device.
- Clean: The screen will be black for 1 minute for easy cleaning.
- Help: Access User Manual, Device parameter information (Model, Version, IMEI, etc.).
For more detailed instructions, please refer to the official user manual PDF: User Manual (PDF)
4. Maintenance
4.1 Battery Replacement
Regularly check and replace batteries in accessories to ensure continuous operation.
4.1.1 Entry Sensor Battery Replacement (Door Sensor A: CR2032x1, Door Sensor B: CR2450x2)
- For Door Sensor A, lift up the cover to access the CR2032 battery.
- For Door Sensor B, slide the back cover in the direction of the arrow to remove it and access the CR2450 batteries.
- Replace with new batteries of the specified type.
4.1.2 Controller Battery Replacement (CR2032)
Use a triangular pick to slide along the gap of the case to open it and replace the CR2032 battery.
4.1.3 Multifunction Button Battery Replacement (23A 12V Alkaline)
Open the cover by pushing it outward from the bottom. Replace the 23A 12V Alkaline battery and close the cover, ensuring it fastens securely.
5. Troubleshooting
| Failure | The Reason | The Solution |
|---|---|---|
| Remote control malfunction | 1. Low battery 2. Metal sheet of battery compartment poor contact/corroded 3. Code not paired with panel 4. Does not match wireless parameters | 1. Replace battery 2. Remove rust/dirt from metal sheets 3. Re-pair with panel 4. Purchase compatible accessories |
| Door sensor failure | 1. Low battery 2. Metal sheet of battery compartment poor contact/corroded 3. Code not paired with panel 4. Does not match wireless parameters 5. Transmitter and magnet installed too far apart | 1. Replace battery 2. Remove rust/dirt from metal sheets 3. Re-pair with panel 4. Purchase compatible accessories 5. Install transmitter and magnet close to each other |
| Motion Detector failure | 1. Low battery 2. Metal sheet of battery compartment poor contact/corroded 3. Code not paired with panel 4. Does not match wireless parameters 5. Incorrect angle | 1. Replace battery 2. Remove rust/dirt from metal sheets 3. Re-pair with panel 4. Purchase compatible accessories 5. Adjust installation angle |
| Security panel does not alarm | 1. Security panel not armed 2. Improper installation of accessories/too far away 3. Accessory code does not match panel | 1. Arm the panel 2. Adjust accessory position 3. Re-pair with panel |
| The signal distance of the panel receiving accessories becomes shorter | 1. Main power disconnected, backup power insufficient 2. Interference from similar products nearby 3. Panel receiving module faulty | 1. Check power supply and restore power 2. Check for and remove interference sources 3. Contact customer service for repair |
| No emergency call was made when the alarm was triggered | 1. The panel is not armed 2. No emergency phone number is set 3. Improper installation of accessories, too far away 4. Encoding does not match | 1. Arm the panel 2. Re-set according to instructions 3. Adjust accessory position 4. Re-pair with panel |
| WiFi network configuration failed | 1. 2.4GHz WiFi not connected 2. Current router not compatible with quick configuration 3. Damaged WiFi module | 1. Connect to 2.4GHz WiFi 2. Adopt panel WiFi hotspot configuration mode 3. Contact customer service for repair |
| Entry opened warning is invalid | 1. Door sensor pairing error 2. Door sensor switch code does not match panel 3. Wrong alarm type set | 1. Pair door opening code correctly 2. Accessories are non-certified devices 3. Set alarm type as main door alarm and window alarm |
6. Specifications
6.1 Security Panel Specifications
| Feature | Specification |
|---|---|
| Model Number | SecPanel 5 H502-WiFi |
| Size | 120mm*105mm*15.5mm |
| Power Supply | DC5V 1.0A, Micro USB |
| Built-in Battery | 3.7V 1500mAh lithium battery |
| Working Power Consumption | <3W |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, eV1527 |
| WiFi Standard | IEEE802.11b/g/n 2.4GHz |
| Zone Number | 200 |
| Alarm Type | The Alarm, Apps Control |
| Communication Interface | Wireless |
| Arming Type | APP |
| Video Interface | Yes |
| Display | Yes |
| Password Keyboard | Yes |
| Smart home platform | Tuya |
| Certification | CE, RoHS |
6.2 Accessory Specifications
| Accessory | Specifications |
|---|---|
| Wireless Keyboard K010 | Input power: DC5V 1.0A, Micro USB Built-in battery: 3.7V 500mAh lithium battery Standby power consumption: <20µA Emission current: <15mA Wireless: 433MHz, eV1527 Product Size: 137.6 x 87.7 x 17.1mm |
| Remote Control R01 | Battery specification: CR2032 x 1 Quiescent current: <5µA Working current: <10mA Working temperature: -10°C~+50°C Wireless parameters: 433MHz, eV1527 |
| Smart Contact Sensor DS200 | Battery specification: CR2450 x 2 Standby current: <5µA Alarm current: <20mA Working temperature: -10°C~+50°C Relative humidity: <95% (no condensation) Wireless parameters: 433MHz, eV1527 Low battery alarm Product size: 70 x 31.5 x 13.5mm (large), 70 x 11 x 13.5mm (small) |
| Infrared Detector PR100 | Battery specification: AA battery x 2 Standby current: <10µA Alarm current: <15mA Detection angle: 110° Working temperature: -10°C~+50°C Relative humidity: <95% (no condensation) Wireless parameters: 433MHz, eV1527 Product size: 53 x 103 x 35mm |
| Outdoor Solar Wireless Siren WSR1000 | Built-in battery: 3.7V/1000mAh lithium battery Maximum output of solar panel: 5V/150mA Standby current: <15mA Alarm volume: 120dB Wireless defense zone: 2 (Z0, Z1) Wireless parameters: 433MHz, eV1527 Product size: 265 x 190 x 60mm |
| Outdoor Wireless Siren WSR101 | Built-in battery: 7.4V 4000mAh lithium battery Input power: AC100-240V 50/60Hz Standby current: 15.5mA Alarm current: <500mA Working temperature: -10°C~+50°C Relative humidity: <95% (no condensation) Alarm volume: 120dB Wireless defense zone: 4 Wireless parameters: 433MHz, eV1527 Product size: 165 x 100 x 65mm |
7. User Tips
- When setting up door sensors, ensure the two parts are very close (less than 0.6 inches) for reliable detection.
- For optimal performance, consider purchasing extra remote controls for convenient arming/disarming.
- If you have a 2G/4G version, remember to disable the SIM card's PIN code on a phone before inserting it into the panel.
- Customize your sensor settings in the APP to differentiate between "Away" and "Home" modes, preventing unnecessary alarms when you are present.
- If you need to expand your system, ensure new sensors are compatible with 433MHz, eV1527 wireless parameters.
8. Warranty and Support
8.1 Warranty Rules
- Contact after-sales service for any product failure caused by the product itself during the warranty period.
- The product is guaranteed for one year from the date of sale, valid only under normal use.
- Damage caused by use in environments not meeting product requirements is not covered.
- Product damage caused by human factors or force majeure is not covered.
8.2 Hazardous Substance Declaration
The product complies with hazardous substance regulations as detailed below:
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent chromium (Cr(VI)) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) |
|---|---|---|---|---|---|---|
| Metal parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Plastic parts | 0 | 0 | 0 | 0 | 0 | 0 |
9. FCC Declaration
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
UK CA CE FC
