AIKE AK1206 Automatic Soap Dispenser Instruction Manual

1. Introduction

Thank you for choosing the AIKE AK1206 Automatic Soap Dispenser. This wall-mounted, touch-free liquid soap dispenser is designed for convenience and hygiene in commercial and bathroom environments. With its large 1100ml capacity and adjustable soap supply, it offers a reliable and efficient hand hygiene solution. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Specifications

Figure 1: AIKE AK1206 Product Parameters

3. Package Contents

Please check the package for the following items:

• AIKE AK1206 Automatic Soap Dispenser Unit
• Wall Mounting Plate
• Installation Screws and Wall Plugs
• Security Key for Top Cover
• Instruction Manual (this document)

4. Safety Information

• Do not submerge the dispenser in water or expose it to excessive moisture.
• Keep the device out of reach of children to prevent misuse.
• Use only liquid soap without solid particles to avoid clogging the dispenser mechanism.
• Ensure proper battery installation (4 AA batteries) and replace them when the low battery indicator appears.
• Avoid placing the dispenser in direct sunlight or near heat sources.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

5. Installation Guide

The AIKE AK1206 can be installed using either adhesive (punch-free) or drilling methods. Choose the method suitable for your wall surface.

5.1 Important Installation Distance

Ensure sufficient distance from the countertop to the dispenser's sensor to prevent accidental activation or interference.

• Normal Countertop: At least 25cm (9.84 inches) from the sensor to the countertop.
• Reflective Countertop: At least 35cm (13.8 inches) from the sensor to the countertop.

Figure 2: Recommended Installation Distance from Countertop

5.2 Adhesive (Punch-Free) Installation

1. Prepare the Surface: Clean and dry the desired wall area thoroughly.
2. Apply Adhesive: Apply the provided adhesive evenly across the back of the mounting plate.


Figure 3: Applying Adhesive to the Mounting Plate

3. Attach Plate: Firmly press the mounting plate onto the wall at the desired height.
4. Cure Time: Allow the adhesive to cure for at least 48 hours before hanging the dispenser. This ensures a strong bond.
5. Install Dispenser: Once cured, slide the dispenser onto the mounting plate. Secure it by installing the screws and closing the battery box cover.


Figure 4: Securing the Dispenser after Adhesive Installation

5.3 Drill Installation

1. Mark Holes: Place the mounting plate on the wall at the desired height and mark the positions for drilling.


Figure 5: Marking Mounting Holes

2. Drill Holes: Drill holes at the marked positions and insert wall plugs if necessary.
3. Install Plate: Secure the mounting plate to the wall using the provided screws.


Figure 6: Installing the Mounting Plate with Screws

4. Install Dispenser: Slide the dispenser onto the mounted plate. Secure it by installing the screws and closing the battery box cover.

5.4 Battery Installation

The dispenser requires 4 AA batteries (not included).

1. Locate the battery compartment at the bottom of the dispenser.
2. Open the battery compartment cover.
3. Insert 4 AA batteries, ensuring correct polarity (+/-).


Figure 7: Battery Compartment and Installation

4. Close the battery compartment cover securely.

6. Operation

6.1 Refilling the Dispenser

1. Unlock Top Cover: Use the provided security key to unlock and open the top cover of the dispenser.


Figure 8: Steps for Refilling Liquid Soap

2. Fill Liquid Soap: Pour liquid soap into the reservoir. Ensure the liquid soap does not contain solid particles to prevent clogging.


Figure 9: Easy Refilling Process

3. Close Cover: Close the top cover and lock it with the key.

6.2 Power On/Off

The dispenser features a multifunction button for power control.

• Power On: Long press the multifunction button for 3 seconds. The indicator light will flash 3 times.
• Power Off: Long press the multifunction button for 3 seconds.

6.3 Adjusting Soap Supply Level

The dispenser offers 5 adjustable levels for soap output, ranging from 0.5ml (Level 1) to 2.5ml (Level 5).

• Adjust Level: Short press the multifunction button to cycle through the 5 levels. Each press will change the dispensed volume.

Figure 10: Multifunction Button and Soap Output Levels

6.4 Using the Dispenser

Once installed, filled, and powered on, simply place your hand under the sensor. The dispenser will automatically dispense the set amount of liquid soap.

Figure 11: Automatic Dispensing in Use

7. Maintenance

7.1 Cleaning

• Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Do not rinse the dispenser directly under water or submerge it.

7.2 Battery Replacement

When the low battery alert indicator lights up, it's time to replace the batteries.

1. Open the battery compartment at the bottom of the dispenser.
2. Remove the old AA batteries.
3. Insert 4 new AA batteries, ensuring correct polarity.


Figure 12: Replacing AA Batteries

4. Close the battery compartment cover securely.

7.3 Liquid Type

For optimal performance and to prevent clogging, use standard liquid hand soap. Avoid using foaming soaps, granular soaps, or soaps with exfoliating beads.

8. Troubleshooting

9. User Tips

• Universal Compatibility: This dispenser works with most all-purpose brands of liquid soap, offering flexibility in your choice of hand soap.
• Easy Refilling: The wide-open design allows for easy refilling without messy drips, making maintenance simple and clean.
• Secure Top Cover: Utilize the provided key to lock the top cover, preventing tampering and ensuring hygiene, especially in public or commercial settings.
• Adjustable Dispensing: Experiment with the 5 adjustable soap supply levels to find the perfect amount for your needs, optimizing soap usage and reducing waste.

10. Warranty and Support

AIKE products are manufactured to high-quality standards. For any issues, questions, or support needs regarding your AIKE AK1206 Automatic Soap Dispenser, please contact the seller or AIKE customer service. Please retain your purchase receipt as proof of purchase for warranty claims.

11. Product Video Guide

Watch this video for a visual guide on installation and operation of the AIKE AK1206 Automatic Soap Dispenser.