1. Introduction
The Ulanzi MT-57 and MT-58 are extendable selfie sticks designed for panoramic cameras, action cameras, and smartphones. They feature a multi-section extension, durable aluminum alloy construction, and a silicone handle for comfortable grip. These selfie sticks are particularly noted for their "invisible" effect when used with compatible Insta360 panoramic cameras, allowing for unobstructed, impossible-angle shots.
2. Features
- Multi-section Extension: Available in 80cm (MT-57) and 120cm (MT-58) lengths for versatile shooting angles.
- Invisible Effect: Designed to be invisible in 360° panoramic video when used with Insta360 ONE X2, Insta360 ONE RS/R 360° panoramic lens, and Insta360 ONE X cameras.
- Universal Compatibility: Features a universal 1/4" threaded screw for direct mounting of panoramic cameras, sports cameras, and cell phone holders.
- Durable Construction: Made from strong and durable aluminum alloy.
- Comfortable Grip: Equipped with a new silicone handle for enhanced comfort during use.
- Safety Features: Includes a safety wrist strap for fall protection.
- Tripod Mount: A 1/4" threaded hole at the base allows for attachment to tripods and other accessories.
- Lightweight & Portable: The MT-57 weighs 130g and the MT-58 weighs 172g, making them easy to carry and store.
3. Package Contents
The package typically includes:
- Ulanzi MT-57 or MT-58 Extendable Selfie Stick
- Safety Wrist Strap
Note: Cameras, cell phone holders, and GoPro adapters are not included and must be purchased separately.
4. Setup Instructions
4.1 Attaching Your Camera/Device
- Locate the 1/4" threaded screw at the top of the selfie stick.
- Align your panoramic camera, sports camera, or cell phone holder (with a 1/4" screw mount) with the screw.
- Gently twist your device clockwise onto the screw until it is securely fastened. Do not overtighten.
Figure 1: Universal 1/4" Threaded Mount for Cameras and Smartphones
4.2 Attaching the Wrist Strap
- Locate the small loop at the base of the selfie stick.
- Thread the thin cord of the safety wrist strap through this loop.
- Pass the larger loop of the strap through the cord loop and pull to secure it.
Figure 2: Safety Wrist Strap and 1/4" Threaded Hole
5. Operating Instructions
5.1 Extending and Retracting the Pole
To extend the selfie stick, firmly grasp the handle and pull the top section upwards. Continue pulling each section until the desired length is achieved. The pole features a damped extension mechanism for stable support and to reduce shaking during use. To retract, push each section back into the main body.
Figure 3: Multi-section Extension
Figure 4: Strongly Damped and Stable Support
5.2 Achieving the "Invisible" Effect
For the selfie stick to appear "invisible" in your footage, you must use it with a compatible Insta360 panoramic camera (e.g., Insta360 ONE X2, Insta360 ONE RS/R 360° panoramic lens, Insta360 ONE X). The camera's software stitches the footage in a way that removes the stick from view, creating a unique third-person perspective.
Figure 5: Selfie Stick "Invisible" Effect Demonstration
5.3 Usage Scenarios
The Ulanzi selfie stick is suitable for a wide range of outdoor activities and sports, including skiing, surfing, motorcycling, skateboarding, soccer, parkour, riding, and kayaking. Its extendable nature allows for high-angle shots and dynamic perspectives.
Figure 6: Selfie Stick in Different Sports Scenes
Video 1: Ulanzi Insta360 Invisible Selfie Stick Demonstration
6. Maintenance
- Cleaning: Wipe the selfie stick with a soft, dry cloth after each use, especially after exposure to water, dust, or sand.
- Storage: Store the selfie stick in a dry, cool place away from direct sunlight and extreme temperatures. Ensure it is fully retracted before storage.
- Inspection: Periodically check all parts for any signs of wear or damage. Do not use if any part is broken or compromised.
- Avoid Force: Do not apply excessive force when extending or retracting the pole to prevent damage to the internal mechanism.
7. Troubleshooting
- Pole not extending/retracting smoothly: Check for any debris or obstructions in the sections. Clean thoroughly. If the issue persists, avoid forcing it and contact support.
- Camera not stable: Ensure the camera is securely tightened onto the 1/4" screw. Check if the camera's mount is compatible and not worn.
- "Invisible" effect not working: Verify that your camera is a compatible Insta360 panoramic model and that you are using the correct camera settings and software for stitching.
- Wrist strap detaching: Ensure the wrist strap is properly threaded and secured through the loop at the base of the stick.
8. Specifications
| Feature | Ulanzi MT-57 | Ulanzi MT-58 |
|---|---|---|
| Brand Name | Ulanzi | |
| Model Number | Action Cameras Selfie Stick Pole | |
| Material | Aluminum, PC (Aluminum alloy + silicone) | |
| Max Extended Length | 800mm (80cm) | 1200mm (120cm) |
| Folded Length | 215mm (21.5cm) | 295mm (29.5cm) |
| Weight | 130g | 172g |
| Weight Capacity | 1kg | |
| Configured for | Action Video Cameras, Smartphones, Cameras (Insta360 camera and other action camera) | |
| Support Remote Control | No | |
| Package | Yes | |
9. User Tips
- The selfie stick's lightweight design makes it easy to carry, roughly equivalent to the weight of one GoPro camera.
- The 1/4" screw at the top is fixed and not designed to be removed, ensuring a secure mount for your camera.
- When using with a GoPro, you will need a separate 1/4" to GoPro adapter (not included).
10. Warranty and Support
Ulanzi products are designed for durability and performance. For any issues or inquiries regarding your selfie stick, please refer to the seller's return policy or contact Ulanzi customer support directly. Keep your proof of purchase for warranty claims.
