Hytera CH10L16

Contents

Hytera CH10L16 Desk Charger User Manual

For Hytera X1p and Z1p Walkie Talkie Handheld Radios

1. Introduction

Thank you for choosing the Hytera CH10L16 Desk Charger. This charger is designed to provide efficient and reliable charging for your Hytera X1p and Z1p series walkie talkie radios and their compatible batteries. This manual provides essential information on how to safely and effectively use and maintain your charger.

2. Important Safety Information

WARNING: To ensure normal charging and prevent damage, please read the host radio's user manual for specific charging operations before using this product.

  • Use only the specified power adapter (not included) with the correct voltage and current ratings (12V DC / 1A). Using an incorrect power adapter may damage the charger or radio.
  • Do not expose the charger to rain, moisture, or extreme temperatures.
  • Do not disassemble or modify the charger. Refer all servicing to qualified personnel.
  • Keep the charging contacts clean and free from debris.
  • Ensure the charger is placed on a stable, flat surface away from heat sources.
  • Unplug the charger from the power outlet when not in use or before cleaning.

3. Package Contents

Your package should contain the following items:

  • Hytera CH10L16 Desk Charger Unit

Note: The power adapter is not included and must be purchased separately.

Hytera CH10L16 Desk Charger with its packaging box
Figure 1: Hytera CH10L16 Desk Charger and packaging.

4. Product Overview

The Hytera CH10L16 features two charging pockets, allowing you to charge a radio with its battery or a spare battery independently.

Top view of the Hytera CH10L16 Desk Charger, showing two charging pockets
Figure 2: Top view of the CH10L16 Desk Charger with two charging pockets.
Close-up of the DC input port on the Hytera CH10L16 Desk Charger
Figure 3: DC Input Port for power adapter connection.
Bottom label of the Hytera CH10L16 Desk Charger with electrical specifications and LED indicator meanings
Figure 4: Bottom label with model and electrical specifications.

5. Specifications

Feature Specification
Model Number CH10L16
Item Type Chargers
Dimensions 107.6 x 84.0 x 48.5 mm
Weight Approx. 140g
Charger Type Normal
Max. Charging Current 1000mA (double pockets)
Number of Pockets 2
Input 12V DC / 1A
Output (Main Unit) 700mA
Output (Battery Only) 300mA
Operating Temperature 0~45℃
Certification CE

6. Setup Instructions

  1. Place the Hytera CH10L16 Desk Charger on a flat, stable, and dry surface.
  2. Connect a compatible 12V DC / 1A power adapter (not included) to the DC INPUT port located on the back of the charger.
  3. Plug the power adapter into a standard AC power outlet. The charger is now ready for use.

7. Operating Instructions

The CH10L16 charger features two pockets for versatile charging:

7.1 Charging a Radio with Battery

  1. Ensure the radio is powered off.
  2. Carefully insert the radio (with its battery attached) into one of the charging pockets, ensuring the battery contacts align with the charger's contacts.
  3. The LED indicator for that pocket will illuminate to show the charging status.

7.2 Charging a Battery Only

  1. Carefully insert a compatible battery into one of the charging pockets, ensuring the battery contacts align with the charger's contacts.
  2. The LED indicator for that pocket will illuminate to show the charging status.

Once charging is complete, the LED indicator will change to green. You may then remove the radio or battery from the charger.

8. LED Indicator Status

The charger features an LED indicator for each pocket to display the charging status:

  • Red (Steady On): The battery is currently charging.
  • Green (Steady On): The battery is fully charged.
  • Orange (Steady On): The battery capacity is at or above 90% (near full).
  • Red (Flashing Slowly): Battery activation in progress.
  • Red (Flashing Rapidly): Charging fault or abnormal temperature detected.
Close-up of the LED indicator on the Hytera CH10L16 Desk Charger
Figure 5: LED indicator for charging status.

9. Maintenance and Care

  • Cleaning: Disconnect the charger from the power source before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the charger in a cool, dry place when not in use.
  • Contact Points: Periodically inspect the charging contacts for dirt or corrosion. Clean gently with a cotton swab if necessary.

10. Troubleshooting

Problem Possible Cause Solution
Charger LED does not light up.
  • No power to the charger.
  • Incorrect or faulty power adapter.
  • Radio/battery not properly seated.
  • Check power outlet and adapter connection.
  • Ensure power adapter meets 12V DC / 1A specification.
  • Re-seat the radio/battery firmly in the pocket.
LED flashes rapidly red.
  • Charging fault.
  • Battery temperature abnormal.
  • Remove and re-insert the battery/radio.
  • Allow battery to reach normal temperature before charging.
  • If problem persists, the battery or charger may be faulty.
Battery does not charge fully.
  • Battery is old or damaged.
  • Charging contacts are dirty.
  • Consider replacing the battery.
  • Clean the charging contacts on both the charger and battery/radio.

11. User Tips

  • Remember that the charger unit typically does not include a power supply. You will need to use a compatible 12V DC / 1A power adapter.
  • Always ensure the radio or battery is seated correctly in the charging pocket for proper contact and charging to begin.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or an authorized Hytera service center. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.