LetonPower Sealion

Contents

LetonPower Sealion Series Diving Light User Manual

Models: Sealion-L12, Sealion-L15, Sealion-L24

1. Introduction

The LetonPower Sealion series diving lights are designed for underwater photography, video fill light, and general scuba diving illumination. Developed with feedback from diving professionals, these lights offer enhanced stability, water resistance, salt water corrosion resistance, and extended battery life. They feature high brightness, multiple lighting modes, and a robust design suitable for challenging underwater environments.

LetonPower Sealion Diving Light underwater
LetonPower Sealion Diving Light in an underwater setting.

2. Safety Warnings

  • Always ensure the flashlight is properly sealed and tightened before any underwater use.
  • High brightness modes generate significant heat. When used on land, it is recommended to use low brightness modes to prevent overheating. The flashlight may automatically reduce brightness if it overheats.
  • Remove batteries for long-term storage to prevent leakage and corrosion.
  • Do not look directly into the light beam to avoid eye injury.
  • Keep out of reach of children.

3. Package Contents

The package typically includes the following items. Contents may vary slightly depending on the specific model (L12, L15, L24) and purchased variant.

  • 1 * Sealion Diving fill light flashlight (specific model: L12, L15, or L24)
  • 1 * Type-C charging cable
  • 1 * Wrist strap
  • 1 * Ball handle bracket
  • 1 * Waterproof Lubricant
  • 1 * L type screwdriver
  • 3 * O-rings
  • 1 * Hard shell rainproof storage tote bag
  • Note: Batteries (21700 rechargeable) may not be included and need to be purchased separately. Please check your specific product listing.
LetonPower Sealion L24 package contents
Typical package contents for Sealion L24 model.
LetonPower Sealion L12 package contents
Typical package contents for Sealion L12 model.

4. Specifications

Feature Sealion-B15 (L15) Sealion-B24 (L24) Sealion-L12
Lumen Output 8000 Lumen (20000 Lumen for L15 variant) 9000 Lumen (22800 Lumen for L24 variant) 18000 Lumen
Color Temperature (CCT) 6500K
Color Rendering Index (CRI) 90+
Runtime (Strong Light) 70 min 60 min Approx. 2 hours (White light strong mode)
Runtime (Middle Light) 240 min 200 min Approx. 3.5 hours (White light mid-range mode)
Runtime (Low Light) 360 min 300 min Approx. 8 hours (White light low mode)
Battery Type 3x 21700 rechargeable batteries (13500mAh total capacity)
Waterproof Depth 80M (IPX8 rated), tested to 120M, recommended diving depth 100M
Beam Angle 120°
Weight (in water) 275g (with battery)
Weight (on land) 587g (with battery)
Irradiation Distance 300-500 meters
Maximum Power 300W
Working Voltage 3.7V
Charging Method Type-C interface charging (2A fast charging)
Shell Design Non-conductive structure, hard oxidation technology
Glass Features 6mm double-layer hard-coated PC glass
Product Color Black
Net Weight (without battery) 400g
Size 14cm (length), 6.5cm (head diameter), 6cm (tail diameter)
Sealion series LED configurations for L15, L24, L12
LED configurations for Sealion L15, L24, and L12 models.
120 degree beam angle diagram
The 120-degree beam angle provides uniform and soft high-power light.

5. Initial Setup

  1. Battery Installation: If batteries are not pre-installed, insert the 21700 rechargeable batteries into the flashlight. Ensure correct polarity.
  2. Tighten Flashlight: After installing batteries, firmly tighten all parts of the flashlight, especially the battery compartment, to ensure a waterproof seal.
  3. O-Ring Maintenance: Before initial use and periodically thereafter, clean and lubricate the O-rings with the provided waterproof lubricant. Inspect them for any damage or debris.
  4. Accessory Attachment: Attach desired accessories such as the wrist strap, ball handle bracket, or ball mounts as needed for your diving setup.
Battery compartment and Type-C interface
Illustration of the battery compartment and Type-C charging interface.
Dimensions and accessories usage examples
Dimensions of the diving light and examples of how to use it with various accessories like wrist strap, handle, and ball mounts.

6. Operation

The Sealion diving light features dual on/off buttons and dual LED indicators for intuitive control.

Dual on/off buttons and LED indicators
Diagram showing the left (white light) and right (red/blue light) control buttons and LED indicators.

6.1. White Light Control (Left Button)

  • Press the left button to cycle through white light modes: High > Middle > Low.
  • Note for Land Use: When using on land, it is recommended to use low brightness modes. High brightness generates significant heat and can cause the flashlight to overheat. The flashlight will automatically reduce brightness if it overheats.

6.2. Red/Blue Light Control (Right Button)

  • Press the right button to cycle through red and blue light modes: Red Light (620nM) > Red Slow Flash > Blue Light (455nM) > Red Fast Flash.

6.3. Turning Off the Flashlight

  • From any mode, press and hold either the left or right button for two seconds to turn off the flashlight.

6.4. Dimming Operation (Fine-tuning for Photography)

  • The light supports combined modes for photography: White Light + Red Light (4500K-5000K) and White Light + Blue Light (6000K-7000K).
  • The switch system allows independent control of different light sources and displays real-time battery information.

6.5. Switch Indicator Light

  • When the flashlight is on, the button will display a blue light.
  • If the battery level is greater than 30%, the indicator light is blue.
  • If the battery level is between 5% and 30%, the indicator light turns red.
  • When the battery is low, the indicator light will flash for 10 seconds before turning off.

7. Charging

The Sealion diving light features a built-in Type-C interface for convenient charging.

  • Connect the provided Type-C charging cable to the flashlight's charging port.
  • Connect the other end of the cable to a compatible power source (e.g., mobile phone charger, power bank, car charger, computer USB interface).
  • The light supports 2A fast charging, doubling the charging speed compared to ordinary 1A chargers.
  • Begin charging when the indicator light turns red or flashes, indicating low battery. This helps prevent battery over-discharge and prolongs battery life.
Various charging methods for the diving light
The diving light supports multiple charging methods via its Type-C interface.

8. Maintenance

  • After Use: After each use, especially in saltwater, thoroughly clean the diving light and all equipment with fresh water.
  • O-Ring Care: Regularly clean, lubricate, and inspect the O-rings. This is crucial for maintaining the flashlight's waterproof integrity and extending its lifespan.
  • Battery & Contacts: Keep the battery and electrical contacts clean to ensure optimal performance and prevent corrosion.
  • Storage: When the diving flashlight is not in use for an extended period, remove the batteries to prevent leakage and corrosion. Store the light in a cool, dry place, away from direct sunlight.
Diagram showing corrosion resistance features, stainless steel switch, and O-rings
Key features for durability: non-conductive shell, stainless steel switch, and triple O-ring waterproof design.

9. Troubleshooting

If you encounter any issues with your LetonPower Sealion Diving Light, please refer to the following common solutions:

  • Light not turning on: Check if the batteries are correctly installed and charged. Ensure all parts of the flashlight are securely tightened.
  • Dim or flickering light: Recharge the batteries. Clean battery contacts.
  • Water leakage: Immediately cease use. Disassemble, clean, and inspect O-rings for damage or improper seating. Replace O-rings if necessary and re-lubricate. Ensure all seals are tight before re-submerging.
  • Overheating: If the light becomes excessively hot on land, switch to a lower brightness mode or turn it off to cool down. This is a protective mechanism.

For persistent issues, please contact customer support.

10. User Tips

  • The Sealion diving light is highly recommended for underwater photography and video due to its high lumen output and excellent color rendering index (CRI ≥ 90), which helps restore true colors underwater.
  • Consider purchasing spare 21700 batteries if they are not included in your package, to ensure you always have power for your dives.
  • The robust design and quality construction make it a valuable tool for serious divers and underwater content creators.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Manufacturer: Shenzhen Debo Information Technology Co., Ltd

Email: letonpower@Foxmail.com

Address: C302, building C, Antonio, No. 17, Wan'an Road Shajing street, Bao'an District Shenzhen, GuangDong China

12. Product Videos

Official product video showcasing the LetonPower Sealion Diving Light in various underwater scenarios, demonstrating its use for photography and illumination.

© 2023 LetonPower. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.