I. Important Safety Information
⚠ Warning: Non-professional engineers must not disassemble the machine.
Always ensure the blender is unplugged from the power source before attempting any installation, removal, or cleaning of the blades.
II. Product Overview
This manual provides instructions for the FGHGF Blender Knife Replacement Blades, designed for commercial blenders with 4L/5L jars.
Video: Demonstration of the blender knife replacement blade, showing its construction and smooth rotation.
III. Installation and Setup
- Ensure the blender is turned off and unplugged from the power source.
- Carefully remove the old blender blade assembly from the blender jar.
- Insert the new FGHGF Blender Knife Replacement Blade into the machine in its original position. Ensure it is seated correctly and securely.
- Verify that the blade assembly is firmly attached before operating the blender.
Image: Side view of the blender knife replacement blade assembly, showing the threaded base and blades.
Image: Top view of the blender knife replacement blade assembly, highlighting the serrated edges.
IV. Operating Instructions
Once installed, the replacement blade functions identically to the original blade. Refer to your blender's main instruction manual for specific operating procedures.
- Ensure the blender jar is properly assembled with the new blade and securely placed on the blender base.
- Add ingredients to the blender jar, ensuring not to exceed the maximum fill line.
- Secure the lid firmly before starting the blender.
- Select the desired speed or program on your blender.
V. Maintenance and Care
To ensure optimal performance and longevity of your blender knife replacement blades:
- Keep Clean: Always clean the blades thoroughly after each use. Disassemble the blade assembly from the jar for easier cleaning. Use warm, soapy water and a brush to remove any food residue. Rinse well.
- Drying: Ensure all parts are completely dry before reassembling or storing to prevent rust or corrosion.
- Storage: Store the blades in a safe place to prevent accidental cuts and damage to the blades.
VI. Troubleshooting
- Problem: Accessory feels loose after installation.
- Solution: Simply re-secure the accessory. Ensure it is tightly screwed into place or properly seated in its original position within the blender jar.
VII. Specifications
| Feature | Detail |
|---|---|
| Brand Name | FGHGF |
| Model Number | Blender jar Blades |
| Type | Blender Parts |
| Origin | Mainland China |
| Compatibility | Commercial blenders with 4L/5L jars |
| Package Length | 15 cm |
| Package Width | 14 cm |
| Package Height | 12 cm |
| Package Weight | 0.27 kg |
| High-concerned chemical | None |
For detailed dimensions, such as thread length, it is recommended to compare with your existing part or contact customer service if you are unsure about compatibility.
VIII. User Tips
- Before purchasing, if you are unsure about compatibility, take a picture of your blender cup or machine and contact customer service for assistance.
- Regularly check the blade assembly for any signs of wear or damage to ensure safe and efficient blending.
- Always ensure the blade is securely fastened to prevent loosening during operation.
IX. Warranty and Support
If a quality issue arises with your FGHGF Blender Knife Replacement Blades, please contact our customer service for support. Keep your purchase records handy for faster service.
A user manual (PDF) is also available for download. Please refer to the product page for the link.