1. Introduction
This manual provides essential instructions for the proper installation, operation, and maintenance of the JINGSHUNLI TP.MT5510S.PB802 WiFi Network TV Motherboard. This motherboard is designed for use in various display equipment, enabling WiFi network connectivity for your television.
2. Important Safety Warnings
Kind Reminder: The TV motherboard is a professional TV accessory. Do not attempt installation or repair unless you are a qualified electronic technician. Improper handling can lead to damage to the board or other components, and may pose electrical hazards.
If you are not a professional technician, it is strongly recommended to seek assistance from a qualified professional to diagnose TV malfunctions and perform the installation. Installation may require advanced procedures such as swapping data chips (e.g., EEPROM), writing data with specialized programmers, or adjusting screen parameters in factory mode.
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | TP.MT5510S.PB802 |
| Compatible Audio & Video Equipment Style | Display Equipment |
| Origin | Mainland China |
| High-concerned chemical | None |
4. Installation and Setup
Careful attention to detail is required during the installation of the TP.MT5510S.PB802 motherboard. Ensure all power is disconnected before proceeding.
4.1 Motherboard Overview



4.2 Resolution Identification and Programming
The motherboard supports multiple resolutions, primarily 1920x1080 (Full HD) and 1366x768 (HD). It is crucial to match the motherboard's program to your TV panel's native resolution. The resolution is often determined by the screen cable (LVDS cable) connected to the panel.

If your TV panel has a 1366x768 resolution, you must inform the seller to ensure the correct program is written to the motherboard before shipping. If no specific resolution is requested, the default program will be shipped according to the order photo (which may vary).
The seller uses 'H' to represent 1920x1080 resolution and 'L' to represent 1366x768 resolution in their internal documentation or on the product itself (e.g., near the RF input, as seen in some product images).
The motherboard may require programming via USB or adjustment of screen parameters in factory mode after physical installation. This process typically involves specific firmware files and a USB drive.
5. Basic Operation
Once the motherboard is correctly installed and programmed for your display panel, connect your TV to a power source and external devices (e.g., antenna, HDMI sources, USB drives).
- Power On: Use the TV's power button or remote control to turn on the display.
- Input Selection: Use the remote control to select the desired input source (HDMI, AV, VGA, TV tuner).
- Network Connectivity: The integrated WiFi module allows connection to wireless networks for smart TV functionalities. Access network settings through the TV's menu.
- USB Playback: Insert a USB drive into the USB port to play media files.
For advanced settings or troubleshooting, access the TV's service menu (factory mode) as instructed by a professional technician or specific TV model documentation. This mode allows for fine-tuning of display parameters and other system configurations.
6. Maintenance
To ensure the longevity and optimal performance of your TP.MT5510S.PB802 motherboard:
- Keep Dry: Avoid exposure to moisture or high humidity, which can damage electronic components.
- Clean Gently: If cleaning is necessary, use a soft, dry cloth. Do not use liquid cleaners directly on the board.
- Avoid Static Discharge: When handling the motherboard, always take precautions against electrostatic discharge (ESD) to prevent damage to sensitive components.
- Ventilation: Ensure adequate ventilation around the TV to prevent overheating of the motherboard.
7. Troubleshooting
If you encounter issues after installing the motherboard, consider the following common troubleshooting steps. Remember, professional assistance is highly recommended for complex problems.
- No Display/Incorrect Display:
- Verify that the LVDS cable is correctly connected and that the motherboard's program matches your panel's resolution (1920x1080 or 1366x768).
- Check all power connections to the motherboard and the TV panel.
- Consider if data chip swapping (EEPROM) or writing data with a programmer is necessary.
- Adjust screen parameters in factory mode if the display is distorted or incorrect.
- No Sound:
- Check speaker connections.
- Verify audio settings in the TV menu.
- No WiFi Connectivity:
- Ensure the WiFi module is properly seated.
- Check network settings in the TV menu.
- Remote Control Not Responding:
- Check remote control batteries.
- Ensure the IR receiver on the TV is unobstructed.
For persistent issues, consult a professional electronic technician.
8. User Tips
- Pre-Purchase Verification: Always verify the physical photos of the motherboard and its interfaces against your existing TV board to ensure full compatibility before making a purchase.
- Seller Support: The seller is known for being responsive and helpful with questions. Do not hesitate to contact them for pre-sales consultation or after-sales technical support, especially regarding programming or compatibility concerns.
- Professional Installation: Given the technical nature of this product, professional installation is highly recommended to avoid potential damage or incorrect setup.
9. Warranty and Support
The seller, JINGSHUNLI LED LCD TV accessories Store, has 22 years of experience in LCD accessories and maintains a physical store. All boards are tested before shipping to ensure quality.
For any questions, technical support, or assistance with your TP.MT5510S.PB802 motherboard, please contact the seller directly. They can provide pre-sales consultation and after-sales technical support, including guidance on motherboard data programs.