1. Introduction
This manual provides detailed instructions for the safe and effective use of your HIROYASU HI-R23 4G LTE Zello PoC Network Public Walkie Talkie. Please read this manual thoroughly before operating the device and keep it for future reference.
Package Contents
Upon unboxing, please verify that all items listed below are present and in good condition:
- 1 × Network Walkie Talkie Body
- 1 × 4000mAh Rechargeable Battery Pack
- 1 × AC Adapter (EU, US, UK, or AU plug type depending on selection)
- 1 × Charging Cable (Micro USB 5 Pin Data Cord)
- 1 × Battery Clip
- 1 × Antenna
Video: Unboxing and initial component overview of the HIROYASU HI-R23.
2. Setup
2.1 Battery and SIM Card Installation
- Ensure the device is powered off.
- Locate the battery compartment on the back of the walkie-talkie.
- Remove the battery cover.
- Insert your SIM card into the designated SIM card slot.
- Insert the 4000mAh rechargeable battery pack, ensuring the contacts align correctly.
- Replace the battery cover securely.

Image: Rear view of the HI-R23 with the battery removed, showing the SIM card slot and battery contacts.
2.2 Antenna Installation
- Locate the antenna port on the top of the walkie-talkie.
- Carefully screw the provided antenna into the port until it is finger-tight. Do not overtighten.

Image: Top view of the HI-R23 showing the antenna connection point.
2.3 Belt Clip and Lanyard Attachment
- Attach the belt clip to the designated area on the back of the device using the provided screws and a screwdriver.
- Thread the lanyard through the loop on the top of the device for secure carrying.

Image: Side view of the HI-R23 showing the attached belt clip.
2.4 Charging the Device
- Connect the Micro USB charging cable to the charging port on the side of the walkie-talkie.
- Plug the AC adapter into a power outlet.
- The charging indicator light will illuminate.

Image: Side view of the HI-R23 showing the Micro USB charging port.
3. Operating Instructions
3.1 Power On/Off
To power on the device, long press the power button located on the top of the radio. To power off, long press the power button again and confirm the shutdown on the screen.

Image: Front view of the HI-R23 displaying the 4G LTE network status.
3.2 Basic Navigation
Use the navigation buttons (up, down, left, right, OK, Menu) to navigate through the Android interface. The 'OK' button confirms selections, and 'Menu' typically accesses options or goes back.
3.3 Connecting to Wi-Fi
- From the main screen, navigate to 'Settings'.
- Select 'WLAN' and toggle it to 'On'.
- Choose your desired Wi-Fi network from the list of available networks.
- Enter the password if prompted and press 'OK' to connect.

Image: The HI-R23 display showing the WLAN settings menu.
3.4 Bluetooth Activation
- From the main screen, navigate to 'Settings'.
- Select 'Bluetooth' and toggle it to 'On'.
- The device will scan for available Bluetooth devices.

Image: The HI-R23 display showing the Bluetooth settings menu.
3.5 Using the Zello Application
The HI-R23 supports the Zello Push-to-Talk (PoC) application for network-based communication.
- Open the Zello application from the main menu.
- Sign up for a new account or sign in with an existing one.
- Once logged in, you can join channels or add contacts to initiate group calls or 1-to-1 calls.
- Use the dedicated PTT (Push-To-Talk) button on the side of the device to transmit your voice. Release to listen.

Image: The HI-R23 display showing the Zello application interface.
4. Maintenance
4.1 Cleaning
To clean the device, use a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are dry before charging or use.
4.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use. Store the device and battery in a cool, dry place away from direct sunlight and extreme temperatures.
4.3 Storage
When storing the device for extended periods, ensure it is fully charged and powered off. Remove the battery if possible to prevent potential leakage. Store in a dry, dust-free environment.
5. Troubleshooting
Common Issues and Solutions
- Device not powering on: Ensure the battery is correctly installed and charged. Try connecting to the charger.
- No network signal (4G LTE): Check if the SIM card is properly inserted and activated. Verify network coverage in your area.
- Wi-Fi connection issues: Ensure Wi-Fi is enabled in settings and the correct password is entered. Try restarting the device and your Wi-Fi router.
- Bluetooth pairing failure: Ensure Bluetooth is enabled on both devices and they are within range. Try restarting both devices.
- Zello app issues: Check your internet connection (4G LTE or Wi-Fi). Ensure the Zello app is updated to the latest version.
Factory Reset
If you experience persistent software issues, a factory reset may resolve them. Navigate to 'Settings' and look for a 'Restore' or 'Factory Reset' option. Be aware that a factory reset will erase all user data and settings on the device.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | HIROYASU |
| Model Number | HI-R23 |
| Operating System | Android 5.1.1 |
| Processor | Qualcomm MSM8909 |
| Network Support | LTE FDD/LTD TDD/WCDMA/TDSCDMS/CDMA2000/GSM/CDMA (4G/3G/2G) |
| Frequency Range | LTE FDD: B1, B3; LTE TDD: B38, B39, B40, B38; WCDMA: B19, B5, B8; TDSCDMA: B34, B39; CDMA: EVD0 Rev.A800M; GSM: 900/1800MHz |
| Battery Capacity | 4000mAh |
| Working Voltage | 3.7V |
| Output Power(w) | 3w-5w |
| Screen Size | 1.77" SPI Color Screen |
| Screen Resolution | 160*128 |
| Connectivity | WIFI, Bluetooth 3.0, Built-in Beidou/GPS |
| Charging Port | Micro USB 5 Pin |
| Dimensions | 160 × 60 × 35mm (approx.) |
| Net Weight | 200g |
| Waterproof / Water-Resistant | No |
| Operating Temperature | -20°C to +75°C |
| Storage Temperature | -40°C to +85°C |
| Audio Output Power | 2W@10% distortion |

Image: Diagram illustrating the dimensions of the HIROYASU HI-R23.
7. User Tips
- For optimal network performance, ensure your SIM card is from a compatible carrier and has an active data plan.
- Keep the device's software updated to ensure stability and access to the latest features.
- When using Zello, ensure you have a stable internet connection for clear communication.
- Utilize the lanyard and belt clip for secure carrying, especially in active environments.
- If you plan to use the device in different regions, ensure you select the correct AC adapter plug type (EU, US, UK, AU) during purchase.




Image: Various regional plug adapters available for the HI-R23.
8. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.