PlusAcc E11

Contents

PlusAcc Portable Battery Base for Echo Dot 4th & 5th Gen

Model: E11 / E02

Battery Base for Echo Dot 4th & 5th Generation (Echo Dot not included)

1. Introduction

The PlusAcc Portable Battery Base is designed to make your Amazon Echo Dot 4th or 5th Generation truly portable. This rechargeable power bank allows you to free your Echo Dot from the outlet, enabling you to enjoy your smart speaker anywhere, anytime. It seamlessly integrates with your Echo Dot, providing a secure fit and maintaining optimal sound quality.

Video: Product Overview and Features

2. Product Overview and Setup Guide

Familiarize yourself with the components and follow these steps for initial setup.

Diagram of PlusAcc Battery Base with labeled ports and LED indicators

Image: Labeled diagram of the E11 Battery Base showing DC Output Plug, Power Button, DC Input Jack, USB-C Output Port, and Battery Capacity LED indicators.

Product Introduction

  • DC Output Plug: DC 12V 1.25A power output (for Echo Dot).
  • Power Button: Long press for 2 seconds to Power on/Power off.
  • DC Input Jack: DC 12V 1.25A power input (use the Echo Dot original adapter to charge the E11).
  • USB-C Output Port: DC 5V 1A (for charging other devices).

Battery Capacity LED Indicators

LEDsCapacityStatus (Discharging)Status (Charging)
LED11-25%OnSlow flash
LED225-50%OnSlow flash
LED350-75%OnSlow flash
LED475-100%OnSlow flash

Installation Steps

  1. Installation (Step 1): Get the lower part of your Echo Dot device horizontally to align with the E11, and then match the device's edges with the inner sides of the two tabs on the E11.
  2. Installation (Step 2): Press down gently on the Echo Dot until you hear a "click" to ensure it is securely attached to the E11.
  3. Installation (Step 3): Hold the E11 and turn it upside down to check if the Echo Dot is securely installed. If the Echo Dot detaches from the E11 base, please repeat step 1.
  4. Plug In: Insert the DC output plug of the E11 into the charging port of the Echo Dot speaker.
  5. Power On: Long press the power button for 2 seconds to power on. It is recommended that you fully charge the E11 before its first use.
  6. Remove: Gently release one tab on one side of the E11, and your Echo Dot can be easily removed from the base.

3. Operating Instructions

  • Charging the Battery Base: Use the original Echo Dot 4th/5th Gen power adapter to charge the E11 battery base. Connect the adapter to the DC Input Jack on the E11. The LED indicators will slow flash during charging.
  • Powering the Echo Dot: Once the Echo Dot is securely installed and the DC output plug is connected, long press the power button for 2 seconds to turn on the E11. Your Echo Dot will now be powered by the battery base.
  • Using the USB-C Output Port: The E11 includes an additional USB-C charging port (DC 5V 1A). You can use your own USB-C charging cable to power other devices like your phone or headphones. Note that this port cannot be used to charge the E11 battery base itself.
  • Power Saving Tip: When the E11 is powered on with the Echo Dot, even if no audio is playing, it still consumes power. To save battery life, it is recommended to turn off the E11 when not in use.

4. Maintenance

To ensure the longevity and optimal performance of your PlusAcc Battery Base, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the surface of the device. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Charging: Always use the original Echo Dot adapter for charging the battery base to prevent damage.
  • Handling: Avoid dropping, strong vibrations, or any other physical impact that could damage the internal components.

5. Troubleshooting (Frequently Asked Questions)

Q: Why does the E11 turn off about 30 seconds after being powered on?
A: The E11 automatically detects the device when powered on. Please check if the Echo Dot is installed correctly according to the setup guide. If the Echo Dot is not connected correctly, the E11 will automatically shut down after 30 seconds to save energy.
Q: If the DC Output Plug of E11 is accidentally inserted into the DC Input Jack, will it be affected?
A: If plugged in incorrectly, the E11 will automatically detect the problem. You will see the LED lights flashing 3 times, and then the E11 will shut down to initiate power-off protection.
Q: Why does the newly received E11 battery base run out of power soon?
A: The power status of the E11 is not 100% when it leaves the factory. Please fully charge it before your first use (E11-A takes about 3 hours, E11-B takes about 6 hours to be fully charged).
Q: Why does the E11 battery base heat up while charging with the Echo Dot plugged in?
A: This is normal. It's similar to how mobile devices can get warm when watching videos or making calls while charging.
Q: Why does a fully charged E11-A (or E11-B) run out of power after 13 hours (or 24 hours) on standby mode without playing music?
A: This situation is normal. The Echo Dot consumes a significant amount of power in standby mode to ensure it can be woken up with the voice command "Alexa" at any time. We recommend turning off the E11 battery base when not in use to conserve power.
Q: Why can I sometimes not wake up Alexa or play music smoothly? Are these issues related to the installation of E11?
A: These issues are not caused by the E11 battery base. The E11 only powers the Echo Dot and does not impact its functioning. Please check whether your Echo Dot is within Wi-Fi network range and is well connected.
Q: Will the battery life of E11 be affected if it is always connected to the power supply?
A: The power management of E11 is designed with two current channels. When connected to the power supply, current is supplied to the speaker from one channel for playback, while excess power charges the battery via another channel. The playback current does not pass through the battery, so it will not affect the battery life of E11.

6. Specifications

Product Models: E11-A (5000mAh) and E11-B (10000mAh)

FeatureE11-A (5000mAh)E11-B (10000mAh)
Battery Capacity5000mAh/18.5Wh lithium-ion battery10000mAh/37Wh lithium-ion battery
Operating Temperature0°C~40°C0°C~40°C
Input InterfaceDC 12V 1.25A (use Echo Dot original adapter)DC 12V 1.25A (use Echo Dot original adapter)
DC Output Interface12V 1.25A12V 1.25A
USB-C Output Power5V 1A5V 1A
Charging TimeAbout 3 hoursAbout 6 hours
Play Time (100% volume)About 4 hoursAbout 10 hours
Play Time (50% volume)About 8 hoursAbout 15 hours
Standby TimeAbout 12 hoursAbout 24 hours

Additional Specifications

  • Brand Name: PlusAcc
  • Model Number: E02 (internal designation)
  • Set Type: Charger Sets
  • Type: Li-Ion
  • Nominal Capacity: >3500mAh
  • Battery Number: 1
  • Replacement Battery: No
  • Certification: CE, FCC, PSE
  • Origin: Mainland China
  • Color Options: Black, White, Blue

7. Safety Warnings

Improper use may result in battery failure, overheating, and even a serious safety hazard. To avoid personal injuries and damages to property, please strictly save and use the E11 according to the following requirements:

  1. Be sure to charge the E11 with the original Echo Dot adapter to prevent battery damage.
  2. Please keep it out of reach of children. To avoid accidents, children are not allowed to use this product.
  3. Avoid dropping, strong vibration, or any other man-made damage to the E11.
  4. If the E11 expands, deforms, leaks, etc., stop using it immediately and dispose of it properly.
  5. Do not use near any heat source or in any type of wet environment.
  6. Do not attempt to take apart, squeeze, puncture, or dispose of our product in fire. Failure to properly use this product will increase the risk of battery fluid leakage, short circuit, or damage to the device.

8. User Tips

  • Embrace Portability: The primary benefit of this battery base is to make your Echo Dot portable. Don't hesitate to move your speaker around the house or even outdoors (in dry conditions) to enjoy music or Alexa's assistance wherever you go.
  • Quick Installation: Users report that the Echo Dot fits perfectly and installation is extremely quick and secure, often with an audible "click."
  • Original Charger is Key: Always use the original Echo Dot power adapter to charge the battery base for optimal performance and safety. The USB-C port on the battery base is for charging other devices, not the battery base itself.
  • Power Management: To maximize battery life, remember to turn off the battery base when your Echo Dot is not actively in use, as the Echo Dot consumes power even in standby mode.
  • Quality Build: The battery base is noted for its solid plastic construction, providing a durable and non-light duty feel.

9. Support

For further assistance or inquiries, please contact PlusAcc customer support. You may also refer to the official user manual PDF for detailed diagrams and information:

Official User Manual (PDF): View PDF Manual

© 2023 PlusAcc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.