MiLESEEY TR256

Contents

MiLESEEY TR256 Series Infrared Thermal Camera Imager User Manual

Models: TR256, TR256B, TR256C, TR256E

1. Introduction and Overview

The MiLESEEY TR256 series is a range of high-precision handheld infrared thermal camera imagers designed for quick and accurate temperature measurement across various applications. These devices feature an improved 256x192 thermal resolution, a wide temperature measurement range, and a clear 3.5-inch HD display. With capabilities like automatic hot/cold spot tracking, multiple color palettes, and robust construction, the TR256 series is suitable for industrial inspections, auto repair, circuit board analysis, HVAC inspection, and more.

Video: Overview of the MiLESEEY TR256 series thermal camera features and capabilities.

2. Package Contents

Upon opening the retail box, please verify that all the following items are included:

  • MiLESEEY TR256 Series Thermal Imager
  • User Manual
  • SD Card (8GB MicroSD)
  • Lens Cleaning Cloth
  • USB Data Cable (Type-C)
Contents of the TR256B retail box including the thermal imager, user manual, SD card, lens cleaning cloth, and USB data cable.

Image: Typical package contents for the TR256B model.

3. Specifications

The following table outlines the key specifications for the MiLESEEY TR256 series thermal imagers. Note that some specifications may vary slightly between models (TR256, TR256B, TR256C, TR256E).

FeatureSpecification (TR256/TR256B/TR256C)Specification (TR256E)
Thermal Imaging Pixels256*192256*192
Temperature Range-20℃~550℃ (-4°F to 1022°F)-20℃~350℃
Accuracy±3℃/±3% (take the maximum value)±2℃/±2% (take the maximum value)
Display Size3.5 inch HD2.8 inch LCD (320x240)
Display Resolution640*480640*480 (implied by HD, but table says 320x240 for TR256E)
Output Frame Rate≤20Hz25Hz
Battery5000mAh/3.7V Li-ion (Rechargeable)5000mAh Li-ion (Rechargeable)
Battery Life10-12 hours12 hours
Charging Time4 hours (full charge)4 hours (full charge)
Charging Voltage/Current5V 1A or 5V5V 1A or 5V
Spectral Response Band8~14um8~14um
HFOV (Field of View)55.6°±2.8°56°x42°
Pixel Size12um12um
Thermal Sensitivity (NETD)≤50mK@f/1,300K,30Hz40mK
Color PalettesSix (TR256), Seven (TR256B)Four (TR256E)
High/Low Temperature AlarmYesYes
SENSOR Non-uniformity<5%N/A
StorageExternal 8G MicroSD card, eMMC (8GB SanDisk)Micro SD
Communication InterfaceUSB2.0 (HS)*480M (Type-C)U disk
Video OutputCan be chosenN/A
LightHigh-power white LEDLED flash/screen tip
Protection ClassIP65IP54
Operating Temperature0℃~35℃ (Working environment), -20℃~60℃ (Operating)-10℃~50℃
Storage Temperature-40℃~70℃-20℃~60℃ (-4℉~140℉)
Drop Resistance1.5m2M
Dimension238*95*85.5mmN/A
Weight (W/l battery)540gN/A
PC SoftwareYesYes
Real-time Image TransmissionYesYes
USB ConnectionU diskU disk
Transportation/Storage Environment10%~95% RH (non-condensing) Card10%~95% RH (non-condensing) Card
Detailed comparison table of specifications for TR256B and TR256E thermal camera models.

Image: Detailed specifications comparison for TR256B and TR256E models.

4. Key Features

  • High Thermal Resolution: 256x192 pixels for clear and detailed thermal images.
  • Wide Temperature Range: Measures from -20°C to 550°C (or 350°C for TR256E models).
  • High Accuracy: Up to ±2°C/±2% for reliable measurements.
  • Large HD Display: 3.5-inch (or 2.8-inch for TR256E) screen with 640x480 resolution for easy viewing.
  • Automatic Hot/Cold Spot Tracking: Quickly identifies and warns of high or low temperature areas.
  • Multiple Color Palettes: Offers 6, 7, or 4 color palettes (depending on model) for enhanced visualization and analysis.
  • Long Battery Life: Built-in 5000mAh rechargeable battery provides 10-12 hours of continuous operation.
  • Type-C Charging: Convenient and fast charging, reaching full capacity in approximately 4 hours.
  • Infrared + Visible Fusion: Dual camera mode allows switching between infrared and visible light for clearer inspection.
  • Focus-Free Wide FOV: 56°x42° field of view for efficient investigation in various spaces.
  • High-Power LED Lighting: Integrated LED light for working confidently in dark environments.
  • Adjustable Emissivity: Allows for accurate temperature measurement across different object surfaces.
  • PC Analysis Software: Supports PC software for detailed image analysis and reporting (Windows 10 compatible).
  • Durable Design: IP65 (or IP54 for TR256E) dustproof and waterproof rating, with 1.5m (or 2M for TR256B/TR256E) drop resistance.
  • Multi-language Support: Available in 13 languages.
Thermal camera displaying an engine with improved 256x192 thermal resolution and temperature range of -20°C to 550°C.

Image: High thermal resolution for quick and accurate measurements.

Thermal camera screen showing automatic hot/cold spot tracking on an industrial motor.

Image: Automatic Hot/Cold Spot Tracker for quick inspection warnings.

Close-up of the 3.5-inch HD display of the thermal camera showing temperature readings and a thermal image.

Image: 3.5-inch HD display for clear visualization of thermal data.

Diagram showing the thermal camera with a battery icon and '10H Battery Life' indicating 10 hours of operation.

Image: Extended battery life for prolonged use.

Examples of multiple color palettes (Iron, Lava, RainBow, RainBowHC, RdGy, White Hot, Black Hot) for thermal imaging.

Image: Multiple color palettes for diverse analysis needs.

Thermal camera charging via a Type-C USB cable connected to a wall adapter.

Image: Type-C rechargeable battery for convenient power.

Thermal camera screen showing automatic tracking of highest, lowest, and center temperatures.

Image: High/Low Temperature Auto-Tracking feature.

Icons representing Infrared Resolutions 256x192Px, Mixed Data Operation Infrared + Visible Fusion, and Measure Range -20°C~+550°C.

Image: Summary of core capabilities including resolution, fusion, and measurement range.

Thermal camera displaying a wide field of view with 56°x42° FOV Focus-Free capability.

Image: Wide Field of View (FOV) for comprehensive scanning.

Thermal camera held by a hand, showing a thermal image with a temperature range from -20°C to 550°C.

Image: Broad measurement range for diverse applications.

Close-up of the thermal camera's front, highlighting the powerful LED light.

Image: Powerful LED light for illumination in dark areas.

Two thermal cameras showing the adjustable emissivity feature with a rotating cover over the lens.

Image: Adjustable emissivity for accurate readings on various surfaces.

5. Setup

5.1 Charging the Battery

  • Connect the provided USB Data Cable (Type-C) to the charging port on the device.
  • Plug the other end of the USB cable into a compatible 5V 1A or 5V power adapter.
  • The battery indicator on the display will show charging status. A full charge typically takes approximately 4 hours and provides 10-12 hours of operating time.

5.2 Inserting the SD Card

  • Locate the MicroSD card slot on the device (refer to the device diagram in the manual).
  • Gently insert the provided 8GB MicroSD card into the slot until it clicks into place. Ensure the card is oriented correctly.

5.3 Powering On/Off

  • To power on, press and hold the power button until the display illuminates.
  • To power off, press and hold the power button until the device shuts down.

6. Operating Instructions

6.1 Basic Operation and Navigation

  • Use the directional buttons and 'SET' button to navigate through menus and confirm selections on the 3.5-inch HD display.
  • The device supports 13 languages, which can be selected in the settings menu.

6.2 Thermal Imaging Modes

  • Infrared & Visible Light Dual Camera Mode: Switch between pure infrared, visible light, or fusion modes to get a clearer view of the inspection area. This allows for detailed thermal analysis combined with visual context.
  • Color Palettes: Select from available color palettes (e.g., Iron, Lava, Rainbow, White Hot, Black Hot) to optimize the thermal image for different inspection scenarios and improve contrast.

6.3 Measurement and Analysis

  • Automatic Hot/Cold Spot Tracking: The device automatically identifies and highlights the highest and lowest temperature points on the screen, providing quick warnings for critical areas.
  • Adjustable Emissivity: For accurate temperature readings on various surfaces, adjust the emissivity setting in the device menu to match the material being inspected.
  • TR256C Laser Distance Meter: The TR256C model includes a laser distance meter function to assist in temperature measurement by providing distance information.

6.4 Capturing and Storing Images

  • Press the dedicated capture button (usually a trigger or a prominent button) to save a thermal image to the inserted MicroSD card.
  • The device has internal eMMC storage (8GB SanDisk) for additional memory.

6.5 Data Transfer and PC Analysis

  • Connect the thermal imager to a computer using the USB Data Cable to transfer images and data. The device will appear as a 'U disk'.
  • For advanced analysis, use the dedicated PC Analysis Software (compatible with Windows 10). Contact customer service for the download link if needed.
A computer screen displaying the MiLESEEY PC analysis software interface with thermal images and data graphs.

Image: PC Analysis Software for detailed thermal data interpretation.

7. Maintenance

7.1 Cleaning

  • Regularly clean the lens and display screen using the provided lens cleaning cloth. Avoid abrasive materials or harsh chemicals.
  • Wipe the device body with a soft, damp cloth as needed.

7.2 Battery Care

  • To prolong battery life, avoid fully discharging the battery frequently.
  • Store the device with a partial charge if it will not be used for an extended period.

7.3 Storage

  • Store the thermal imager in a dry, cool place within the recommended storage temperature range of -40℃ to 70℃ (-20℃ to 60℃ for TR256E).
  • Ensure the storage environment has 10%~95% RH (non-condensing) humidity.

7.4 Durability

  • The device is rated IP65 (TR256/TR256B/TR256C) or IP54 (TR256E) for dust and water resistance, making it suitable for various environments.
  • It is designed to withstand drops from 1.5m (TR256) or 2M (TR256B/TR256E). Handle with care to prevent damage.

8. Troubleshooting

If you encounter any issues with your MiLESEEY TR256 series thermal imager, please refer to the following common troubleshooting steps:

  • Device not powering on: Ensure the battery is sufficiently charged. Connect the device to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
  • Inaccurate temperature readings: Verify that the emissivity setting is correctly adjusted for the material being measured. Ensure the lens is clean and free from obstructions.
  • Images not saving: Check if the MicroSD card is properly inserted and has sufficient free space. Try reinserting the card or using a different compatible card.
  • PC software connection issues: Ensure the USB cable is securely connected to both the device and the computer. Try a different USB port or cable. Make sure the PC analysis software is installed correctly and is compatible with your operating system (Windows 10 recommended).

For persistent issues or problems not covered here, please contact MiLESEEY customer support.

9. User Tips

  • The TR256C model uniquely features a laser distance meter function, which can be helpful for precise temperature measurements by providing accurate distance data.
  • If you require the PC analysis software for Windows 10, please contact MiLESEEY customer service directly to obtain the download link.
  • The TR256 series thermal cameras do not typically include an adapter lens specifically for electronics work as a standard accessory. Check product listings for specialized kits if this is a requirement.

10. Warranty and Support

For information regarding product warranty, technical support, or service, please refer to the warranty card included in your package or visit the official MiLESEEY website. Keep your purchase receipt as proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.