FDIK FDIK-Plastic-2KW

Contents

FDIK 2KW 12V 24V Car Diesel Air Parking Heater Instruction Manual

Model: FDIK-Plastic-2KW | Brand: FDIK

FDIK 2KW 12V/24V Car Diesel Air Parking Heater

Main product view of the FDIK 2KW 12V/24V Car Diesel Air Parking Heater with rotary switch display.

1. Introduction

The FDIK 2KW Car Diesel Air Parking Heater is an autonomous heating device designed to provide warmth in various environments without requiring the vehicle's engine to run. It is suitable for cars, trucks, RVs, boats, homes, garages, and winter greenhouses. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your heater.

Application scenarios for the FDIK diesel heater

Visual representation of various application scenarios for the heater, including cars, trucks, RVs, boats, homes, garages, and winter greenhouses.

2. Safety Information

  • Ensure proper ventilation when operating the heater, especially in enclosed spaces.
  • Always use diesel fuel as specified. Do not use gasoline or other volatile fuels.
  • Verify correct voltage (12V or 24V) before installation and operation to prevent damage.
  • Keep flammable materials away from the heater's exhaust and hot air outlet.
  • Do not block the air intake or hot air outlet.
  • In case of malfunction, switch off the heater immediately and consult a qualified technician.
  • The smart motherboard includes multiple protections: open circuit, short circuit, overvoltage, and undervoltage protection. However, correct installation is crucial.
FDIK smart motherboard with protection features

Image detailing the FDIK smart motherboard, emphasizing its stability and various protections: open circuit, short circuit, overvoltage, and undervoltage protection.

3. Product Overview

3.1 Components

The FDIK Car Diesel Air Parking Heater package typically includes the following components:

  • Heater Host
  • Oil Pump
  • Controller (Rotary Switch)
  • Exhaust Pipe
  • Tubing (Fuel and Air)
  • 5.0L Fuel Tank
  • Wire Harness
  • 60mm Wind Head
  • Air Filter
  • Oil Filter
  • Rubber Pad
  • Fixed Plate
  • Oil Pump Clamp
  • Screw Accessory Kit
  • Instruction Manual
Accessories list for the FDIK diesel heater

Comprehensive Accessories List, showing all components included in the package.

3.2 Internal Structure and Features

The heater is constructed with high-quality materials and fine craftsmanship to ensure durability and performance. Key internal components include:

  • Motor Assembly: Features a copper core motor with dynamic balance technology for stable rotation and quiet operation.
  • Combustion Chamber: Made from high-quality 310S material, designed for efficient and full combustion of diesel fuel.
  • Glow Plug: Utilizes Kyocera ignition technology, reaching 1200-1300°C instantly after power-on, ensuring quick ignition (approx. 35 seconds). Operates at 90W.
  • Oil Pump: A high-quality copper core pulse pump (22ml) designed for fuel efficiency (0.4L/h). Proper 45° installation is recommended for extended service life.
  • Heating Zone: Equipped with an overheat protection device and flame retardant impeller for safety.
  • Control Box: Manages the heater's functions.
  • Air Wheel: Facilitates air circulation.
Detailed internal components of the FDIK diesel heater

Detailed breakdown of key internal components: Motor Assembly, Combustion Chamber, Glow Plug, and Oil Pump.

Exploded diagram of the FDIK heater internal parts

Exploded diagram of the heater showing internal parts: Heating zone, Overheat protection device, Flame retardant impeller, Control box, Air wheel, Glow plug, Combustion chamber, Motor assembly.

3.3 How It Works

The parking heater operates by drawing cold air from the air inlet. This air passes through a heated aluminum body, where it is warmed. The hot air is then blown out from the air outlet, circulating warmth into the desired space. Simultaneously, diesel fuel is supplied to the combustion chamber, ignited by the glow plug, and the fumes are expelled through the exhaust pipe. This process allows for efficient heating without the need to run the vehicle's engine.

Air circulation and combustion process diagram

Diagram illustrating the air circulation and combustion process: cold air intake, heating through an aluminum body, hot air outlet, diesel fuel intake, and fumes exhaust.

Diagram explaining how the parking heater works

Diagram explaining "How it Works" - an on-board heating device that pre-heats the cab without starting the engine.

4. Installation

Proper installation is critical for the safe and efficient operation of your FDIK parking heater. It is recommended that installation be performed by a qualified professional.

4.1 Wiring Diagram

Connect the positive and negative main wires to the vehicle's battery. Ensure all connections are secure to prevent damage to the main unit. The switch connects to the main wire harness. The oil pump should be connected via the oil filter.

Installation Diagram for FDIK diesel heater

Installation Diagram showing wiring connections (positive, negative, switch, main wire harness, oil filter, oil pump).

4.2 Installation Position

The heater can be installed in various locations depending on the vehicle type. Ensure the air inlet and air outlet are not obstructed and are cooled as needed. The oil pump is preferably installed at an angle between 15-35 degrees for optimal performance and longevity.

  • Truck: On the co-driver's legroom, on the back wall of the cab, driver's seat backrest, under the tool box.
  • RV: In front of the passenger seat, between the driver seat and passenger seat, under the container, in the trunk.
  • 5 Seater / 7 Seater: Mainly installed in the passenger row or luggage room. If not possible, fix under the underside of the vehicle, being cautious of splashing.
  • Excavator: Inside the driver's seat, on the back wall of the cab, inside the protection box.

The installation diagram image also illustrates these positions.

12V and 24V application examples

Visual guide for 12V and 24V applications, showing 12V for cars, boats, greenhouses, and 24V for trucks, buses, RVs.

5. Operation

5.1 Controls

The FDIK heater is controlled via a rotary switch with an LCD display. This controller allows you to adjust the temperature and power settings.

  • Temperature Control: Adjust the desired temperature between 16°C and 35°C.
  • Power Control: Adjust the heating power between 1KW and 2KW.
FDIK LCD Switch for temperature and power control

Image focusing on the FDIK LCD Switch, indicating it controls temperature (16-35°C) and power (1-2kW).

5.2 Starting and Stopping

Refer to the specific instructions provided with your controller for detailed steps on starting and stopping the heater. Generally, a long press or specific sequence on the rotary switch will initiate or terminate operation.

5.3 Fuel Priming

Some controllers may offer a fuel priming function. This is used to fill the fuel lines with diesel before the first use or after running out of fuel, ensuring a smooth start-up. Consult your controller's specific manual for instructions on how to perform fuel priming.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your parking heater.

  • Fuel Filter: Periodically check and replace the fuel filter to ensure clean fuel supply to the heater.
  • Air Filter: Inspect and clean or replace the air filter as needed to maintain optimal airflow.
  • Exhaust System: Ensure the exhaust pipe is free from blockages and leaks.
  • General Cleaning: Keep the exterior of the heater clean and free from dust and debris.
  • Component Check: Regularly inspect all connections and components for wear or damage.

7. Troubleshooting

If you encounter issues with your FDIK parking heater, consider the following common problems and solutions:

  • Heater not starting: Check power connections, fuel level, and ensure the glow plug is functioning. Verify the controller is properly connected and not damaged.
  • Insufficient heat: Check for obstructions in air intake/outlet, ensure fuel quality, and verify correct power setting.
  • Unusual noises or smells: Immediately shut down the heater. Inspect for loose components, fuel leaks, or exhaust blockages. Do not operate until the issue is resolved.
  • Error codes on display: Refer to the specific error code meanings in the detailed controller manual (if available) or contact customer support.

Incorrect wiring can lead to component damage. Always follow the installation diagram carefully.

8. User Tips

  • Controller Manual: For advanced functions like fuel priming or specific error code interpretations, refer to the detailed manual that comes with your display controller.
  • Installation Angle: Ensure the oil pump is installed at the recommended 15-35 degree angle to maximize its service life.
  • Voltage Match: Double-check that you have the correct 12V or 24V model for your vehicle to prevent electrical issues.
  • Spare Parts: While the product is designed for durability, inquire with FDIK Official Store for availability of spare parts like controllers or glow plugs if needed for long-term maintenance.

9. Technical Specifications

SpecificationValue
Model NameFDIK-Plastic-2KW
Power (W)2000W (Thermal power: 900-2000W)
Voltage12V or 24V (depending on model)
Fuel TypeDiesel
Operating Temperature-40°C to 40°C
Air Volume60-90m³/h
Fuel Consumption0.1-0.35L/H (0.15-0.55L/H depending on temperature/power)
Item Length335mm (approx. 13.2 inches)
Item Width115mm (approx. 4.5 inches)
Item Height120mm (approx. 4.7 inches)
Item Diameter60mm (approx. 2.4 inches)
Item Weight4.7kg (approx. 10.4 lbs)
MaterialPlastics, Aluminum, Steel
Switch TypeRotary switch
Special FeaturesHeating
External Testing CertificationCE

Note: Actual data may deviate due to environmental factors like temperature and altitude.

Dimensions and specifications table for FDIK heater

Dimensions of the heater and a table of key specifications.

Technical specifications table for FDIK heater

Technical specifications table including thermal power, voltage, fuel, operating temperature, and air volume.

10. Certifications

The FDIK 2KW Car Diesel Air Parking Heater complies with relevant international standards.

EAC Declaration of Conformity certificate

EAC (Eurasian Economic Union) Declaration of Conformity certificate.

UDEM International Certification (CE) certificate

UDEM International Certification (CE) certificate for Fuel Oil Heater.

11. Support

For further assistance, technical inquiries, or spare parts, please contact the FDIK Official Store. They offer 24-hour customer service to address your needs.

FDIK After-sales Service information

FDIK Brand Story and After-sales Service information, mentioning 24-hour customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.