Trumpeter 01082 1/35 15U175 TEL of RS-12M Topol-M

Contents

Trumpeter 01082 1/35 15U175 TEL of RS-12M Topol-M Plastic Model Kit

Instruction Manual

1. Introduction and Overview

This manual provides detailed instructions for assembling and finishing your Trumpeter 01082 1/35 scale plastic model kit of the 15U175 TEL (Transporter Erector Launcher) of the RS-12M Topol-M ICBM complex. This highly detailed kit allows you to recreate a significant piece of military engineering with precision.

The kit features an accurate reproduction of the transport body, including the engine, suspension unit, and a complicated drive system. You have the option to assemble the model in either a transportation or a standby state, offering versatility in display.

Box art showing the 15U175 TEL of RS-12M Topol-M ICBM complex model kit.
Box art of the Trumpeter 01082 1/35 15U175 TEL of RS-12M Topol-M Plastic model kit.
Assembled model of the 15U175 TEL of RS-12M Topol-M ICBM complex.
An assembled view of the 15U175 TEL of RS-12M Topol-M ICBM complex model.

2. Specifications

FeatureDetail
Model Name15U175 TEL of RS-12M Topol-M
Model Number01082
BrandTrumpeter
Scale1:35
MaterialPlastic
TypeMilitary Vehicle Model Kit
Number of PartsApprox. 1100+
Full Length (assembled)Approx. 638.2mm
Full Width (assembled)Approx. 115.5mm
Recommended Age18+
OriginMainland China
Package Size62 x 36 x 13.5 cm
Package Weight2580g

3. Package Contents

Upon opening the box, please verify that all components are present and undamaged. The kit typically includes:

  • Plastic sprues containing approximately 1100 parts
  • Basic photo-etched parts (4 pieces)
  • Decal sheet
  • Rubber resin tires
  • Instruction booklet (this manual)
Product box showing the model kit and a glimpse of the parts.
The product box, showing the model and some of the included parts.

4. Assembly Instructions

Follow the step-by-step diagrams provided in the included instruction booklet and refer to the parts diagrams below. Use appropriate plastic model cement and tools (not included) for assembly.

4.1 Parts Overview

Detailed parts diagram for the Trumpeter 01082 model kit, page 2, showing various sprues (A, B, C, D, E, Hx4, Kx2, Lx2, S).
Parts diagram (Page 2) showing sprues A, B, C, D, E, Hx4, Kx2, Lx2, S.
Detailed parts diagram for the Trumpeter 01082 model kit, page 3, showing various sprues (Fx2, Jx3, T, R, M, N, P, Q) and photo-etched parts (PE-Ax2, PE-B, PE-C), along with decals and die-cut masks.
Parts diagram (Page 3) showing sprues Fx2, Jx3, T, R, M, N, P, Q, photo-etched parts, decals, and die-cut masks.

4.2 General Assembly Steps

  1. Carefully remove parts from the sprues using a hobby knife or nippers.
  2. Clean any flash or mold lines using a hobby knife or sanding stick.
  3. Test fit parts before applying cement to ensure proper alignment.
  4. Assemble sub-assemblies such as the engine, suspension, and drive system as indicated in the diagrams.
  5. Pay close attention to the orientation of parts, especially for the complex transport body.
  6. Decide whether to build the model in the transportation or standby state early in the assembly process, as this may affect certain steps.
  7. Attach the rubber resin tires as instructed.
  8. Utilize the photo-etched parts for enhanced detail where indicated.

5. Painting and Marking Guide

The kit includes decals and a comprehensive painting guide to help you achieve an authentic finish. Refer to the diagram below for color schemes and decal placement.

Painting and Marking Guide for the Trumpeter 01082 model kit, showing three different camouflage schemes (A, B, C) with color references.
Painting and Marking Guide showing various camouflage schemes and color references (Mr. Hobby Aqueous Color, Mr. Color, Acrysion Color).

5.1 Painting Tips

  • Clean all parts thoroughly before painting to remove any grease or dust.
  • Apply a primer coat for better paint adhesion and a uniform finish.
  • Use thin coats of paint to preserve surface detail.
  • Allow each coat of paint to dry completely before applying the next or handling the model.
  • Refer to the color codes provided in the guide for accurate color matching.

5.2 Decal Application

  • Cut out each decal carefully, as close to the image as possible.
  • Dip the decal in lukewarm water for a few seconds until it slides freely from the backing paper.
  • Gently slide the decal onto the desired position on the model.
  • Use a soft brush or cotton swab to carefully position the decal and remove any excess water or air bubbles.
  • Apply a decal setting solution if necessary to help the decal conform to surface details.
  • Once dry, apply a clear coat (gloss or matte, depending on desired finish) to seal the decals and protect the paintwork.

6. Display and Handling

Once your model is complete, choose a stable, dust-free environment for display. Avoid direct sunlight, which can cause paint fading or plastic warping over time. Handle the model carefully, holding it by its base or sturdy sections to prevent damage to delicate parts.

7. Maintenance

To keep your model in pristine condition:

  • Dusting: Regularly dust the model with a soft, dry brush or a can of compressed air. Avoid using abrasive materials that could scratch the paint or plastic.
  • Cleaning: For stubborn dirt, lightly dampen a cotton swab with water or a mild, non-abrasive cleaner specifically designed for plastics. Test on an inconspicuous area first.
  • Storage: If storing the model for an extended period, place it in a sealed container to protect it from dust and environmental factors.

8. Troubleshooting

Encountering issues during assembly or finishing is common. Here are some general tips:

  • Parts not fitting: Ensure you are using the correct parts for the step. Check for excess plastic (flash) on the edges of parts and carefully trim it away. Lightly sand mating surfaces if needed.
  • Gaps between parts: Use plastic putty or filler to fill any noticeable gaps after assembly. Sand smooth once dry.
  • Paint issues: If paint is uneven or peeling, ensure the surface was clean and primed. Apply paint in thin coats. Humidity can also affect paint drying and finish.
  • Decal silvering: This occurs when air is trapped under the decal. Ensure the surface is glossy before applying decals and use a decal setting solution to help them conform.

9. User Tips

  • Inspect Packaging: Upon receiving your kit, carefully inspect the packaging and contents for any damage. The kit box is often protected by additional packaging during transit, such as polystyrene sheets.
  • Read Instructions Thoroughly: Before starting assembly, read through the entire instruction manual to familiarize yourself with the steps and identify all parts.
  • Organize Parts: Keep parts organized by sprue letter to make them easier to find during assembly.

10. Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • This is a detailed scale kit for adult collectors to assemble.
  • Not for children under 3 years due to small parts which may pose a choking hazard.
  • Always use hobby tools (knives, glues, paints) in a well-ventilated area.
  • Keep all chemicals and small parts out of reach of children and pets.
  • Follow safety instructions provided with any glues, paints, or other modeling supplies used.

11. Warranty and Support

This product is an imported model kit. For any issues regarding missing or defective parts, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.

Due to the nature of model kits, individual results may vary based on assembly skill and painting techniques. The manufacturer is not responsible for issues arising from improper assembly or use of third-party materials.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.