EARUELETRIC DR-15

Contents

DR-15 15W Industrial DIN Rail Switching Power Supply User Manual

Model: DR-15 | Brand: EARUELETRIC

1. Introduction

This manual provides essential information for the safe and efficient operation of your EARUELETRIC DR-15 15W Industrial DIN Rail Switching Power Supply. Please read this manual thoroughly before installation and use, and keep it for future reference. This power supply is designed to convert AC input voltage (100-240V) to a stable DC output (5V, 12V, or 24V, depending on the model), suitable for various industrial applications.

2. Safety Information

  • Ensure the power supply is disconnected from the main power source before any installation, wiring, or maintenance.
  • Installation should only be performed by qualified personnel in accordance with local electrical codes and regulations.
  • Do not operate the device in environments with excessive moisture, dust, or extreme temperatures.
  • Verify that the input voltage matches the specifications of the power supply before connecting.
  • Do not open the casing of the power supply. There are no user-serviceable parts inside.
  • Ensure proper grounding to prevent electrical shock.

3. Product Overview

3.1 Features

  • Multiple Protection Functions: Includes Short Circuit Protection, Overload Protection, Over Current Protection, and Over Voltage Protection to ensure safe operation and protect connected devices.
  • Efficient Heat Dissipation: Designed with cooling holes and cutouts for quick and effective heat dissipation, ensuring long-term stable operation.
  • Compact DIN Rail Mounting: Easily mounts on a standard 35mm DIN rail, saving space and simplifying installation in control cabinets.
  • Adjustable Output Voltage: Features an adjustable resistance (+V ADJ) for fine-tuning the output voltage within a specified range.
  • DC OK Indicator: A visual indicator (green LED) confirms proper DC output operation.
EARU ELECTRIC DR-15W Power Supply with protection features listed

Figure 1: EARU ELECTRIC DR-15W Power Supply highlighting protection features.

3.2 Components

  • Input Terminals (L, N): For connecting the AC input power.
  • Output Terminals (+, -): For connecting the DC load.
  • DC OK Indicator: A green LED that illuminates when the DC output voltage is within the normal operating range.
  • +V ADJ (Adjustable Resistance): A potentiometer for fine adjustment of the output voltage.
  • DIN Rail Clip: Mechanism for mounting the power supply onto a standard DIN rail.
Side view of the power supply highlighting efficient heat dissipation through cooling holes.

Figure 2: Side view showing cooling holes for efficient heat dissipation.

4. Specifications

Dimensions and Parameter Information table for DR series power supplies.

Figure 3: Product dimensions and parameter information.

ParameterValue
Product NameDR-15
TypePower Supply
Brand NameEARUELETRIC
Model NumberDR-15
Rated Power15W
Input VoltageAC100-240V
Output Voltage5VDC, 12VDC, 24VDC (model dependent)
Output Current2.4A (for 5V), 1.25A (for 12V), 0.63A (for 24V)
Output Frequency50/60Hz
Output TypeSINGLE
Mounting35mm DIN Rail Mounting
Modulation ModeKnob Turn
FunctionConvert AC power to DC power
Protection FunctionsShort circuit, Overload, Over current, Over voltage protection
CertificationCE
Dimensions (approx.)92mm (H) x 25mm (W) x 56mm (D)

5. Installation

  1. Mounting: The DR-15 power supply is designed for mounting on a standard 35mm DIN rail. Align the power supply's clip with the DIN rail and press firmly until it clicks into place.
  2. Space Requirements: Ensure adequate ventilation around the unit. Maintain sufficient clearance from other heat-generating components to facilitate efficient heat dissipation.
Power supply mounted on a DIN rail, showing its compact form factor.

Figure 4: Power supply mounted on a DIN rail.

6. Wiring Diagram

Refer to the diagram below for correct wiring connections. Ensure all connections are secure and properly insulated.

Detailed wiring diagram showing Input Voltage (L, N), Output Positive (+), Output Negative (-), Working Indicator (DC OK), and Adjustable Resistance (+V ADJ).

Figure 5: Wiring diagram for the DR-15 power supply.

  • Input (AC): Connect the Live (L) and Neutral (N) wires from your AC power source to the corresponding input terminals.
  • Output (DC): Connect the positive (+) and negative (-) terminals to your DC load.
  • Grounding: Ensure proper grounding of the system.

7. Operation

  1. Power On: After ensuring all connections are correct and secure, apply AC power to the input terminals.
  2. DC OK Indicator: The green "DC OK" LED will illuminate, indicating that the power supply is operating correctly and providing stable DC output.
  3. Voltage Adjustment: If necessary, use a small screwdriver to carefully turn the "+V ADJ" potentiometer to fine-tune the output voltage. Monitor the output voltage with a multimeter during adjustment.

Video 1: Demonstration of the power supply being switched on and the DC OK indicator lighting up.

8. Troubleshooting

  • No Power/DC OK Indicator Off:
    • Check the AC input power connection and ensure the power source is active.
    • Verify that the input voltage is within the specified range (AC100-240V).
    • Inspect wiring for loose connections or damage.
  • Output Voltage Incorrect:
    • Use a multimeter to measure the output voltage.
    • Adjust the "+V ADJ" potentiometer carefully.
    • Ensure the load connected is not exceeding the rated power (15W) or current capacity of the power supply. Overload protection may be active.
  • Intermittent Operation:
    • Check for overheating. Ensure proper ventilation and clear any obstructions from cooling holes.
    • Verify that the ambient temperature is within the operating limits.
    • Check for unstable input power.
  • Protection Features Triggered:
    • If the power supply shuts down, it may be due to short circuit, overload, over current, or over voltage. Disconnect the load, check for faults, and then reapply power.

9. Maintenance

  • Keep the power supply clean and free from dust. Use a soft, dry cloth for cleaning.
  • Regularly check all wiring connections for tightness and signs of wear or damage.
  • Ensure that the cooling holes are not blocked to maintain optimal heat dissipation.
  • Do not use abrasive cleaners or solvents.

10. User Tips

  • The output frequency of this power supply is 50/60Hz, making it compatible with various global power standards.
  • The wide input voltage range of AC100-240V allows for flexible use in different regions without requiring additional voltage converters.
  • When selecting a model, ensure the output voltage (5V, 12V, or 24V) and current capacity match the requirements of your specific application.

11. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.