Zemismart Zigbee Electric Roller Shade Motor

1. Introduction

Thank you for choosing the Zemismart Zigbee Electric Roller Shade Motor. This motor is designed to automate your roller shades, offering convenience through app control, voice commands, and remote control. It features a built-in rechargeable battery and is compatible with 37mm and 38mm inner diameter tubes. For smart features, a Zigbee hub (such as a Tuya Zigbee hub or Matter Hub M1) is required.

2. Safety Information

• Ensure the motor is installed correctly and securely within the roller shade tube.
• Keep the motor and remote control away from water and excessive moisture.
• Do not attempt to disassemble or repair the motor yourself. Contact qualified personnel for service.
• Keep the remote control out of reach of children to prevent accidental operation.
• Use only the provided Type-C charging cable or a compatible charger for recharging the motor.
• Ensure the roller shade is free from obstructions during operation to prevent damage to the motor or shade.

3. Package Contents

Please check the package for the following items:

• Zemismart Zigbee Electric Roller Shade Motor
• Mounting Brackets (2 pcs)
• Type-C Charging Cable (3m length)
• RF Remote Control (if selected with remote option)

4. Setup

4.1. Installation (Mechanical)

The motor is designed to fit roller shade tubes with an inner diameter of 37mm or 38mm. Ensure your existing or new roller shade tube is compatible. The motor comes with replaceable tail plugs to ensure a snug fit. Secure the motor within the tube and mount the roller shade using the provided brackets.

4.2. Charging the Motor

The motor has a built-in 2600mAh lithium battery. Before first use, or when the battery is low, charge the motor using the provided Type-C charging cable.

1. Locate the Type-C charging port on the motor.
2. Connect the Type-C charging cable to the port and a suitable USB power adapter.
3. The motor will charge, and the indicator light may show charging status (refer to specific light behavior in troubleshooting if needed).

4.3. Connecting to the App (Requires Zigbee Hub)

To control the motor via the Smart Life or Tuya Smart APP, a Zigbee hub (e.g., Matter Hub M1) is required and is not included with the motor.

1. Ensure your Zigbee hub is set up and connected to the Smart Life/Tuya Smart APP.
2. Open the Smart Life/Tuya Smart APP and navigate to your Zigbee hub page.
3. Press the "+" button (Add subdevice) at the bottom of the hub page.
4. On the motor, press the [Setting button] 5 times within 5 seconds and hold it for 3 seconds on the fifth press. The motor will shake once, and the green light will flash, indicating it's in distribution (pairing) status.
5. In the app, click on "LED already blink" (or similar confirmation). The Zigbee hub will automatically search for the device.
6. Once the device is found and added, click "Done". You can then rename the device.

4.4. Connecting the RF Remote Control

If your package includes an RF remote control, follow these steps to pair it with the motor:

1. Press the [Setting button] on the motor for 1 second.
2. The motor will shake once to confirm it's ready for pairing.
3. Press the "Up" button on the RF remote control one time.
4. The motor will shake once again, indicating successful pairing.

4.5. Setting Top & Down Limits

You can set the upper and lower limits for your roller shade through the Smart Life/Tuya Smart APP. This allows you to define the maximum open and closed positions.

1. Open the Smart Life/Tuya Smart APP and select your roller shade motor.
2. Navigate to the settings or calibration section within the device interface.
3. Follow the on-screen instructions to set the desired top and bottom limits.

5. Operating Instructions

5.1. App Control

Once connected to the Smart Life/Tuya Smart APP via a Zigbee hub, you can control your roller shade motor from anywhere:

• Open/Close: Use the main controls in the app to fully open or close the shade.
• Percentage Control: Adjust the shade to a specific percentage (e.g., 50% open).
• Group Control: Control multiple motors simultaneously if grouped in the app.

5.2. Voice Control

Integrate your motor with voice assistants for hands-free control (requires Zigbee hub and compatible smart home platform):

• Alexa: "Alexa, open the curtains."
• Google Home: "Hey Google, close the blinds."
• Siri/Apple Home: Control via Apple Home app.
• Bixby/SmartThings: Control via SmartThings app.

5.3. Remote Control (RF)

If you have an RF remote control, use the buttons to operate the shade:

• **Up/Open Button:** Moves the shade upwards.
• **Down/Close Button:** Moves the shade downwards.
• **Stop Button:** Stops the shade at its current position.

The remote supports individual motor control or group control if multiple motors are paired to different channels on a multi-channel remote.

5.4. Timer Control

Set schedules for automatic opening and closing of your roller shades through the Smart Life/Tuya Smart APP. This allows for personalized automation based on time or other conditions.

6. Maintenance

• Charging: Recharge the motor when the battery indicator shows low power. The built-in lithium battery is rechargeable and recyclable.
• Cleaning: Wipe the motor and remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Storage: If storing for an extended period, ensure the motor is fully charged and store in a cool, dry place.

7. Troubleshooting

Q: How do I put the motor into pairing mode for the app?

A: To put the motor into pairing mode for app connection, press the [Setting button] on the motor 5 times within 5 seconds and hold it for 3 seconds on the fifth press. The motor will shake once, and the green light will flash, indicating it's in distribution (pairing) status.

Q: The motor is not responding to the remote control.

A: Ensure the remote control is paired correctly. Follow the steps in Section 4.4. Also, check the remote control's battery. If the issue persists, try re-pairing the remote.

Q: The motor is not responding to app commands.

A: Verify that your Zigbee hub is online and properly connected to the internet. Ensure the motor is within range of the Zigbee hub. Check the motor's battery level. If necessary, try re-pairing the motor to the app (Section 4.3).

Q: The roller shade does not stop at the desired position.

A: Re-calibrate the top and down limits using the Smart Life/Tuya Smart APP as described in Section 4.5.

8. Specifications

9. User Tips

• Zigbee Hub is Essential: Remember that a Zigbee hub (e.g., Tuya Zigbee hub or Matter Hub M1) is required for app control, voice control, and advanced smart features. This is not included with the motor.
• Tube Compatibility: This motor is specifically designed for roller shade tubes with an inner diameter of 37mm or 38mm. Double-check your tube size before installation.
• Maximum Shade Size: The motor can handle roller shades up to 3 meters in length and 5 kg in weight. Ensure your shade falls within these limits for optimal performance.
• Charging Convenience: The Type-C charging port and included 3m cable offer flexible charging options. Consider charging the motor fully before initial setup.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's official website or contact their customer service. Keep your purchase receipt as proof of purchase.

11. Product Video

Watch this video to see the Zemismart Electric Roller Shade Motor in action, demonstrating its smooth operation and functionality.