UGREEN 130W USB C Car Charger

Introduction

Thank you for choosing the UGREEN 130W USB C Car Charger. This high-performance car charger is designed to provide rapid and efficient charging for a wide range of devices, including smartphones, tablets, and laptops, directly from your vehicle's lighter slot. With multiple ports and intelligent power distribution, it ensures your devices are powered up quickly and safely on the go.

Image: UGREEN 130W USB C Car Charger, featuring three charging ports (USB-C1, USB-A, USB-C2) and indicating 100W output on USB-C2.

Setup Instructions

1. Locate Car Lighter Slot: Identify the 12V-24V car lighter (cigarette lighter) socket in your vehicle.
2. Insert Charger: Firmly insert the UGREEN 130W USB C Car Charger into the car lighter slot. Ensure it is securely seated to maintain a stable connection.
3. Verify Power: The LED indicator light on the charger will illuminate, confirming that the charger is receiving power and ready for use.

Image: The UGREEN car charger shown in comparison to a car, SUV, and truck, illustrating its compatibility with various 12V-24V vehicle types.

Image: The car charger securely installed in a vehicle's power outlet, demonstrating its stability even during speed bumps, rough roads, or abrupt stops.

Operating Instructions

The UGREEN 130W Car Charger features three output ports: USB-C1, USB-C2, and USB-A, allowing you to charge up to three devices simultaneously.

Connecting Your Devices:

1. USB-C1 Port: Connect your USB-C compatible devices for fast charging up to 30W. This port supports PD3.0, QC3.0, FCP, AFC, APPLE 5V2.4A, and BC1.2 protocols.
2. USB-C2 Port: For super-fast charging, especially for laptops, use this port which provides up to 100W output. It supports PD3.0, PPS, QC4+(QC4.0/QC3.0), FCP, AFC, APPLE 5V2.4A, and BC1.2 protocols.
3. USB-A Port: Connect your standard USB-A devices for charging up to 22.5W. This port supports SCP, QC3.0, FCP, AFC, APPLE 5V2.4A, and BC1.2 protocols.

Image: The car charger simultaneously charging an iPhone, a tablet, and another device, demonstrating its ability to power three devices at once with a total output of 130W.

Intelligent Power Distribution:

The charger intelligently distributes power across its ports to optimize charging speeds for connected devices. Here are some common power distribution scenarios:

• USB-C1 + USB-C2 + USB-A: 12W + 100W + 12W (130W Total)
• USB-C1 + USB-C2: 30W + 100W (130W Total)
• USB-C2 + USB-A: 100W + 22.5W (122.5W Total)
• USB-C1 + USB-A: 12W + 12W (24W Total)

Image: A visual representation of the power output combinations for USB-C2, USB-C1, and USB-A ports, detailing maximum wattage for single and combined use.

LED Indicator Light:

The built-in LED indicator light helps you quickly locate the charging ports in low-light conditions, ensuring easy and convenient connection of your devices at night.

Image: Close-up of the car charger's ports with a blue LED light illuminating the USB-C1, USB-A, and USB-C2 ports, highlighting its visibility in the dark.

Maintenance

• Cleaning: Regularly wipe the charger with a soft, dry cloth to remove dust and debris. Avoid using liquid cleaners or abrasive materials.
• Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
• Air Vent Design: The charger features an air vent design for efficient heat dissipation. Ensure the vents are not obstructed to maintain optimal performance and prevent overheating.

Image: The UGREEN car charger with visual cues indicating airflow through its cooling vents, emphasizing its heat dissipation capabilities.

Troubleshooting

• Charger Not Powering On: Ensure the charger is fully inserted into the car lighter slot. Check your vehicle's fuse for the lighter socket if the issue persists.
• Slow Charging: Verify that your device and cable support fast charging protocols (PD, QC, SCP, AFC). Ensure you are using the correct port for your device's maximum charging speed (e.g., USB-C2 for 100W).
• Device Not Charging: Try a different charging cable or device to isolate the problem. Ensure the charger's ports are clean and free of debris.
• Overheating: The charger is equipped with a multi-protection chip to prevent overcharge, overheat, and short circuits. If the charger feels excessively hot, disconnect it immediately and allow it to cool down. Ensure proper ventilation around the charger.

Image: Transparent view of the car charger's internal components, highlighting the Intelligent Identification Chip (for matching charging current) and the Power Management Chip (for overcharge, overheat, and short circuit protection).

Trickle Protection:

To protect your device's battery life, the charger intelligently activates a trickle charging mode when your device's power reaches approximately 80%. This prevents overcharging and extends battery longevity.

Image: A graph illustrating the trickle charging trend, showing power delivery decreasing as the battery charge approaches 100%, with key points at 60%, 80%, and 100% charge levels.

Specifications

User Tips

• For optimal fast charging, ensure your device and charging cable are compatible with the charger's supported protocols (PD, QC, SCP, AFC).
• The USB-C2 port is ideal for power-hungry devices like laptops, offering up to 100W output.
• The charger is designed to be stable and maintain connection even on bumpy roads or during sudden stops.
• The LED indicator light is useful for locating ports in the dark, enhancing convenience during night driving.

Warranty and Support

UGREEN is committed to providing high-quality products. This product is certified original and designed with security and privacy in mind, featuring multi-protection chips to ensure safe operation.

For any product inquiries, technical support, or warranty claims, please contact UGREEN customer service through their official channels. Please retain your purchase receipt as proof of purchase.