Dooya DM35S 10/17

Contents

Dooya DM35S 10/17 Tubular Motor Instruction Manual

Model: DM35S 10/17

1. Product Overview

The Dooya DM35S 10/17 is a standard tubular motor designed for various types of rolling blinds. It operates on 220V/230V 50/60Hz power and features a 4-wire connection for robust electric blind control. This motor is intended for integration into a complete motorized roller blind system.

Dooya DM35S 10/17 Tubular Motor
Figure 1: Dooya DM35S 10/17 Tubular Motor with specifications label.

2. Specifications

FeatureSpecification
Model NumberDM35SL10/17
Rated Torque10 Nm
Rated Speed17 r/min
Motor Diameter35 mm
Tube Compatibility45mm double grooved pipe, 50mm grooved pipe, 50mm round pipe, 40mm octagonal pipe.
Rated Voltage220V / 230V
Rated Frequency50 Hz / 60 Hz
Rated Power121 W
Running Current0.53 A
Degree of ProtectionIP44
Max Number of Turns30
Running Time4 min
Product CertificatesCE, RoHS
Motor Length530 mm
Motor Weight1.58 kg
Technical Data and Wiring Diagram
Figure 2: Detailed technical data and wiring diagram for the tubular motor.
Motor Dimensions
Figure 3: Motor dimensions, showing length and diameter.

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your tubular motor. This motor is designed to be integrated into a roller blind system.

3.1 Component Identification

A typical motorized roller blind system includes the following components:

  • Tubular Motor (DM35S 10/17)
  • Drive Adapter
  • One Pair Bracket
  • Driving Tube (Roller Blind Tube)
  • Fabric (Blind Material)
  • Remote Controller (Sold separately)
  • Tail Plug
  • Bottom Beam
Motorized Roller Blind System Diagram
Figure 4: Exploded view of a typical motorized roller blind system.

3.2 Tube Compatibility

The DM35S motor is compatible with various tube types. Before installation, ensure your roller blind tube matches one of the compatible types:

  • 45mm Double Grooved Pipe
  • 50mm Grooved Pipe
  • 50mm Round Pipe
  • 40mm Octagonal Pipe
  • Other compatible tubes as shown in Figure 5.
Compatible Tube Types
Figure 5: Examples of compatible tube profiles for the DM35S motor.

3.3 Wiring Instructions

The motor uses a 4-wire connection. Refer to the wiring diagram in Figure 2 for detailed connections. Ensure all connections are secure and comply with local electrical codes.

  • Blue Wire: Common (Public Line)
  • Brown Wire: Direction 1 (Up/Forward)
  • Black Wire: Direction 2 (Down/Reverse)
  • Green/Yellow Wire: Earth (Ground)

The motor requires a 220V/230V, 50/60Hz power supply. Professional installation is recommended.

Motor Wiring Detail
Figure 6: Close-up of motor end showing wiring connections.

4. Operating Instructions

Once the motor is correctly installed and wired into your roller blind system, operation is typically controlled via a compatible remote controller (not included with the motor). The remote controller sends signals to the motor to move the blinds up or down.

4.1 Basic Operation

  1. Ensure the motor is connected to a stable power supply (220V/230V, 50/60Hz).
  2. Use your remote controller to send commands. Typically, there are 'Up', 'Down', and 'Stop' buttons.
  3. Press the 'Up' button to raise the blinds.
  4. Press the 'Down' button to lower the blinds.
  5. Press the 'Stop' button to halt the blinds at any desired position.

4.2 Limit Setting

The motor features adjustable upper and lower limit settings to define the maximum travel of your blinds. Refer to the specific instructions provided with your remote control and blind system for how to set these limits. The motor setting key (visible in Figure 6) is used for these adjustments.

5. Maintenance

The Dooya DM35S 10/17 tubular motor is designed for low maintenance. However, regular checks can help ensure its longevity and optimal performance.

  • Cleaning: Keep the motor and surrounding area free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Connection Check: Periodically inspect the electrical connections to ensure they are secure and free from corrosion or damage.
  • Obstruction Check: Ensure that the roller blind system operates smoothly without any physical obstructions that could strain the motor.
  • Professional Inspection: If you notice any unusual noises, erratic operation, or significant performance degradation, consult a qualified technician.

6. Troubleshooting

If you encounter issues with your tubular motor, consider the following troubleshooting steps:

ProblemPossible CauseSolution
Motor does not respond to remote.No power, remote battery low, remote not paired, wiring issue.Check power supply. Replace remote batteries. Re-pair remote (refer to remote manual). Inspect wiring connections (Figure 2).
Blinds move partially or erratically.Incorrect limit settings, obstruction, motor overload.Re-adjust limit settings. Check for and remove any obstructions. Ensure the blind size and weight are within motor specifications.
Motor makes unusual noise.Internal mechanical issue, obstruction, worn components.Check for obstructions. If noise persists, discontinue use and contact support.
Motor overheats.Continuous operation beyond rated running time, motor overload.Allow motor to cool down. Avoid continuous operation exceeding 4 minutes. Ensure blind weight is within specifications.

If these steps do not resolve the issue, please contact customer support.

7. User Tips

  • Tube Selection: Always ensure the driving tube (roller blind tube) is compatible with the DM35S motor. Refer to Section 3.2 for compatible tube types.
  • Wiring Clarity: Pay close attention to the 4-wire connection (Common, Direction 1, Direction 2, Earth) during installation to prevent operational issues.
  • Professional Help: If you are unsure about electrical wiring or installation, it is highly recommended to seek assistance from a qualified electrician or professional installer.
  • Limit Setting: Accurately set the upper and lower limits of the blind's travel to prevent over-winding or over-extension, which can damage the motor or the blind fabric.

8. Frequently Asked Questions (FAQ)

Q: What supporting equipment does the DM35S motor need?
A: The DM35S motor requires a complete 4-wire strong curtain motor system, which includes an appropriate driving tube, mounting brackets, and a compatible remote controller for operation.
Q: What is the function of this product?
A: This product is a tubular motor specifically designed to automate the raising and lowering of rolling blinds, converting manual blinds into motorized ones.
Q: Does it need a separate motor, or just an external power source? Is the motor already in the tube?
A: This product is the motor. It is designed to be installed inside a compatible tubular blind system. It requires an external power source (220V/230V, 50/60Hz) to function.

9. Warranty and Support

9.1 Limited Warranty

This product comes with a 1-year manufacturer's limited warranty for defective items from the date of receipt. This warranty does not cover items damaged due to misuse or improper installation. Accessories included with the motor typically come with a 3-month warranty.

Defective items must be reported and returned within the warranty period, in their original packaging if possible. Please provide your order number and a description of the defect when making a warranty claim.

9.2 Customer Support

For technical assistance, warranty claims, or any questions regarding the Dooya DM35S 10/17 tubular motor, please contact your retailer or the manufacturer's customer service. Please have your model number and purchase details ready.

Contact information (example - replace with actual contact details if available):

  • Email: support@dooya.com (example)
  • Phone: +1-800-XXX-XXXX (example)
  • Website: www.dooya.com (example)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.