1. Product Overview
This manual provides instructions for the SAGE LU MEI P10 Outdoor Full Color LED Display Panel Module. This module features a 320x160mm size with 32x16 pixels, utilizing 1/8 scan and 3-in-1 SMD2727 RGB technology for vibrant full-color outdoor displays.
2. Setup and Installation
This section outlines the basic steps for setting up your P10 LED module. Proper installation is crucial for optimal performance and longevity.
2.1 Unpacking and Inspection
Upon receiving your LED module, carefully unpack it and inspect for any visible damage. The standard package includes:
- 1 x P10 Outdoor Full Color LED Module
- 1 x Flat Ribbon Data Cable
- 1 x Power Cable (Note: For 'N' modules, you receive 'N' data cables and 'N/2' power cables)
2.2 Connecting Modules
When connecting multiple LED modules to form a larger display, ensure all modules are from the same batch and supplier to guarantee compatibility in terms of plastic housing, IC chips, PCB board, and screw positions. Incompatible modules may lead to display issues.
2.3 Controller Compatibility
This LED module requires an external controller for operation. Please note that compatibility with third-party controllers is not guaranteed. It is recommended to use a compatible controller specifically designed for P10 LED modules with HUB75 port type.
2.4 Power and Data Connections
Connect the flat ribbon data cable(s) to the HUB75 ports on the back of the module(s) and to your LED controller. Connect the power cable(s) to the module(s) and a compatible 5V DC power supply. Ensure all connections are secure before applying power.
3. Operating Instructions
Once the LED module(s) are physically installed and connected to a compatible controller and power supply, follow the instructions provided with your specific LED controller software to configure and operate the display. This typically involves:
- Installing the controller software on your computer.
- Connecting your computer to the LED controller (e.g., via Ethernet, USB).
- Configuring the display parameters in the software (e.g., module type, resolution, scan mode).
- Uploading content (text, images, videos) to the controller.
- Adjusting brightness and other display settings as needed.
Refer to your LED controller's user manual for detailed software operation and content management.
4. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your LED display module.
- Cleaning: Gently clean the front surface of the LED module with a soft, lint-free cloth. For stubborn dirt, use a slightly damp cloth with a mild, non-abrasive cleaning solution. Ensure the module is powered off and dry before use.
- Environmental Conditions: Operate the module within the specified ambient temperature and humidity ranges to prevent damage.
- Connection Checks: Periodically check all data and power cable connections to ensure they are secure and free from corrosion or damage.
- Software Updates: Keep your LED controller software updated to the latest version for improved performance and bug fixes.
5. Troubleshooting
If you encounter issues with your P10 LED module, consider the following troubleshooting steps:
5.1 Display Not Lighting Up
- Verify the power supply is connected and providing the correct 5V DC.
- Check all power cables for secure connections.
- Ensure the LED controller is powered on and functioning correctly.
5.2 Partial or Incorrect Display
- Check all flat ribbon data cables for secure and correct connections between modules and to the controller.
- Confirm that the LED controller software is configured with the correct module type, resolution (32x16 pixels per module), and scan mode (1/8 scan).
- If using multiple modules, ensure they are compatible (purchased at the same time from the same supplier). Variations in components due to product updates can cause display inconsistencies.
5.3 Flickering or Unstable Display
- Ensure the power supply is stable and sufficient for the number of modules connected.
- Check for loose data or power connections.
- Verify the refresh frequency setting in your controller software (should be ≥960Hz).
6. Specifications
Detailed technical parameters for the Outdoor P10 SMD 3in1 LED Module:
| Item | Parameter |
|---|---|
| Model Number | P10 |
| Module Size | 320mm*160mm |
| Pixel Pitch | 10mm |
| Pixels Density | 10000 points/m² |
| Pixel Configuration | 1R1G1B |
| Package Mode | SMD 2727 |
| Pixel Resolution | 32dots(W)*16dots(H) |
| Maximum Power Consumption | 30W |
| Brightness of White Balance | ≥2700cd/m² |
| Module Weight | 0.51kg |
| Drive Type | Constant Current Drive |
| Scan Mode | 1/8 scan |
| Port Type | HUB75 |
| Best Viewing Distance | 10M-50M |
| Best Viewing Angle | 160°(W)120°(H) |
| Ambient Temperature (Storage) | -35℃ ~ +85℃ |
| Ambient Temperature (Working) | -20℃ ~ +50℃ |
| Relative Humidity | 10%-95% |
| Working Voltage | DC5V |
| Average Power Consumption | <350W/m² |
| Max. Power Consumption | <800W/m² |
| Current (Single LED) | <20mA |
| Driving Device | Constant Drive IC |
| Refresh Frequency | ≥960HZ |
| Grey Scale/Colors | 16384 Gray Level/16.7M Colors |
| Certification | RoHS, FCC, CE |
| Origin | Mainland China |
7. Product Support
For any issues with your P10 LED module, please contact your seller or refer to the product documentation for your LED controller. Key service commitments include:
- Refunds for lost packages.
- Refunds for damaged items upon arrival.
- Refunds if no delivery within 30 days.
8. User Tips
- Batch Consistency: To ensure seamless integration and consistent display quality, always purchase all required LED modules for a single display project at the same time and from the same order. This minimizes variations due to product updates.
- Controller Selection: When choosing an LED controller, verify its compatibility with P10 modules and the HUB75 interface.
- Power Calculation: Ensure your power supply is adequately sized for the total power consumption of all connected modules. Refer to the specifications for maximum power consumption per module.
