1. Introduction
The AIFEN A902 is a high-power, dual-station soldering and rework station designed for precision electronic repair. It is ideal for tasks involving cell-phone PCBs, ICs, and other delicate components. With its versatile tip compatibility and intelligent features, the A902 provides efficient and accurate soldering performance for both small and large solder joints.
2. Safety Information
- Always wear appropriate eye protection when soldering.
- Ensure adequate ventilation in your workspace to avoid inhaling fumes.
- Soldering tips and heated components can reach very high temperatures. Avoid direct contact to prevent burns.
- Always place the soldering iron in its stand when not in use.
- Ensure the station is properly grounded to prevent electrical shock.
- Disconnect the power supply before performing any maintenance or changing tips.
- Keep out of reach of children.
3. Package Contents
Upon opening the package, verify that all items are present and undamaged. The standard package typically includes:
- AIFEN A902 Soldering Station Unit
- Soldering Handles (quantity may vary based on specific kit)
- Assorted Soldering Tips (e.g., C115, C210, C245 types)
- Soldering Iron Stands with cleaning accessories (sponge, copper wire ball, copper brush)
- Power Cable
- User Manual (this document)

4. Product Features
- High Power Output: 350W for rapid heating and stable temperature.
- Dual-Station Design: Allows two soldering handles to be used simultaneously and independently.
- Wide Tip Compatibility: Supports C115, C210, C245, and C470 series heating elements/tips, catering to various soldering needs from ultra-small to oversized solder joints.
- Adjustable Handle Brackets: Both handle brackets can be adjusted up and down by 45° for optimal working angles.
- Program Chip Temperature Control: Ensures fast, accurate, and stable temperature regulation, superior to traditional AC voltage control.
- Automatic Sleep Function: When the soldering iron is placed in its stand, it automatically enters sleep mode. Lifting it from the stand instantly reactivates heating.
- Temperature Compensation: Automatically adjusts tip temperature during welding to maintain the set temperature.
- Mechanical Short-Circuit Protection: Automatically stops operation in case of a short circuit to protect the machine.
- Customizable Standby Temperatures: Six preset standby temperature groups (0, 150, 180, 200, 250, 280°C) allow users to select preferred idle temperatures.
- User-Friendly Interface: Features temperature calibration, key lock, Celsius/Fahrenheit conversion, and a buzzer for enhanced usability.
- Three-Stage Tip Cleaning: Integrated cleaning methods including high-temperature cotton, copper wire ball, and copper brush for effective tip maintenance.


5. Setup
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Placement: Place the soldering station on a stable, heat-resistant, and well-ventilated surface.
- Connect Power: Connect the power cable to the power supply socket on the rear of the unit and then to a suitable electrical outlet. Ensure the voltage matches the station's requirements (110V or 220V).
- Connect Ground Wire: For safety, connect a ground wire to the ground wire interface on the rear of the unit if available and required by your setup.
- Attach Soldering Handles: Connect the soldering handles to their respective ports on the front of the station.
- Install Soldering Tips: Insert the desired soldering tips into the handles. The plug-in box design allows for easy tip removal and installation without additional tools.
- Prepare Cleaning Accessories: Ensure the cleaning sponge is slightly damp (not soaking wet) and place it in its designated tray. The copper wire ball and copper brush should also be in their respective holders.

6. Operating Instructions
- Power On/Off: To power on or off the station, press and hold the two buttons located on the soldering handle.
- Temperature Adjustment: Temperature can be adjusted using the buttons on the handle or the control panel on the main unit. The display area shows the current temperature.
- Celsius and Fahrenheit Conversion: In the working state, short press the "SET" key to switch between Celsius (°C) and Fahrenheit (°F) display.
- Temperature Calibration: While in working state, long press the "SET" key in the A/B area to enter the temperature calibration page. Use the heating (up arrow) and cooling (down arrow) keys to adjust the temperature. After adjustment, press the "SET" key again to save and exit.
- Standby Temperature Setting: In shutdown state, press and hold the CH3 key in the A/B area to start up and set the standby temperature. The standby temperature can be set to 0, 150, 180, 200, 250, or 280°C. If set to 0°C, the standby temperature will be closed. After setting, briefly press CH3 in the A/B area to save and exit.
- Independent Station Operation: The A902 features two independent stations (Area A and Area B). You can start or stop each area independently using the corresponding controls on the main unit.
- Tip Usage: The station is compatible with C115, C210, C245, and C470 soldering tips. C210 tips are suitable for small and medium solder joints, while C245 tips are suitable for medium and large solder joints. The 245 handle is compatible with 470 heating elements, allowing for simultaneous use of two 470 heating elements for oversized solder joints.




7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your soldering station and tips.
- Tip Cleaning: The A902 offers three methods for cleaning soldering tips:
- Cleaning Sponge: Dampen the sponge with water (do not soak) and wipe the hot tip to remove excess solder and flux residue.
- Copper Wire Ball: Gently insert the hot tip into the copper wire ball to scrape off stubborn residue without significantly lowering tip temperature.
- Copper Brush: Use the copper brush for more thorough cleaning of the tip surface.
- Tinning Tips: Always re-tin the tip with fresh solder after cleaning and before storing to prevent oxidation.
- General Cleaning: Keep the main unit and handles clean from dust and debris using a soft, dry cloth. Avoid using abrasive cleaners or solvents.

8. Troubleshooting
If you encounter issues with your AIFEN A902 Soldering Station, refer to the following common problems and solutions:
- Station Not Powering On:
Check if the power cable is securely connected to both the station and the electrical outlet. Ensure the power switch on the rear of the unit is in the 'ON' position. - Temperature Not Stable or Incorrect:
Verify that the soldering tip is correctly seated in the handle. Perform a temperature calibration as described in Section 6. Ensure the tip is clean and properly tinned. - Soldering Not Effective (Poor Heat Transfer):
Clean the soldering tip thoroughly using one of the three methods. Ensure the tip is properly tinned. Check that the selected temperature is appropriate for the solder and components being used. Consider if the tip type is suitable for the size of the solder joint. - Short-Circuit Protection Activated:
If the station automatically stops working, it may have detected a short circuit. Identify and resolve any electrical shorts in your setup or the components you are working on. Power cycle the station after resolving the issue. - Tips Oxidizing Quickly:
Ensure tips are always tinned with fresh solder after cleaning and before being placed in standby or stored. Avoid leaving tips at high temperatures for extended periods when not actively soldering.
9. Specifications
| Category | Specification |
|---|---|
| Model Number | AIFEN-A902 |
| Power | 350W |
| Input Voltage | AC220V/110V |
| Frequency | 50-60Hz |
| Temperature Range | 100°C-450°C / 212°F-842°F |
| Product Size | 30cm x 24cm x 20cm (L x W x H) |
| Weight | 2.3kg |
| Origin | Mainland China |
| Certification | CE, RoHS, WEEE |
| High-concerned chemical | None |
| Is Customized | Yes |

10. User Tips
- This soldering station is highly versatile and can be effectively used for repairing PCBs, cell phones, and integrated circuits (ICs).
- To maintain optimal performance and prevent oxidation, always ensure your soldering tips are clean and properly tinned before and after each use.
- The station is designed to be compatible with various JBC-style tips (C115, C210, C245, C470), offering flexibility for different soldering tasks.
- Confirm your local voltage (110V or 220V) before purchasing to ensure compatibility with the station.
11. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your AIFEN A902 Soldering Station, please contact the seller or the authorized distributor from whom you purchased the product. Ensure you retain your proof of purchase for warranty validation.