CYCLAMI BR-2000, BR-1200, AI-1200

Contents

CYCLAMI Bicycle Headlight User Manual

Models: BR-2000, BR-1200, AI-1200

1. Introduction

Thank you for choosing the CYCLAMI Bicycle Headlight. This manual provides essential information for the safe and effective use of your BR-2000, BR-1200, or AI-1200 series headlight. Please read this manual thoroughly before operating the device and keep it for future reference.

2. Key Features

  • High Brightness: Available in 1200 lumens (BR-1200, AI-1200) or 2000 lumens (BR-2000) for increased visibility and safer night riding.
  • Durable Construction: All aluminum alloy housing for enhanced durability and rapid heat dissipation.
  • Advanced Optics: Features an "orange peel light cup" design for anti-glare and a uniform diffused beam (120° to 160°), providing both far and near light zones (floodlight and high beam).
  • Multiple Light Modes: Up to 5 or 7 lighting modes (depending on model), including Medium, High, Low, Flash, and SOS Strobe.
  • Smart Light Sensing Mode: Automatically adjusts brightness based on ambient light conditions. The smart sensor indicator (blue light) activates when ambient illuminance is below 100 lux (high-brightness 1200 lumens) or above 100 lux (daytime flashing). Enters sleep mode after 2 minutes of parking.
  • High-Capacity Battery: Equipped with a 21700 high-performance, high-capacity battery (4500 mAh for BR-2000/AI-1200, 2500 mAh for BR-1200).
  • USB Type-C Rechargeable: Convenient and fast charging via a Type-C USB port.
  • Waterproof: IPX6 waterproof rating, suitable for use in rain and hail.
  • Easy Installation: Quick installation bracket and advanced hoistable design allow mounting on handlebars or helmets.
  • Battery Level Indicator: Visual indicator for battery status (Green: 100-75%, Orange: 75-50%, Red: 50-25%, Red Flash: 25-1%).
  • High Transmittance Acrylic Lens: Strong resistance to impact and high temperature.

3. Specifications

Below is a comparison of the different models and their key specifications:

FeatureBR-2000BR-1200AI-1200
Light Intensity2000 Lumens1200 Lumens1200 Lumens
Wick Model2*OSRAM P8 / 2*OSRAM P72*OSRAM P8 / 2*OSRAM P7XLamp XM-L2 T6 / 1C
Battery Capacity4500 mAh2500 mAh4500 mAh
Battery Life (Max)10H (Flash/SOS)13H (Low Light)76 H (Flashing cyclically)
MaterialAluminum AlloyAluminum AlloyAluminum Alloy
Size (L x W x H)109x39x28 mm109x39x28 mm113x35x32 mm
Weight (Approx.)190g164g192g
Waterproof LevelIPX6IPX6IPX6
Charging ModeType-C USBType-C USBType-C USB
Support Dimmer5-8 files (5th gear)5-8 files (5th gear)7 lighting modes
Mounting PlacementHandlebarHandlebarHandlebar
CertificationCECECE
Intelligent SensingNoNoYes (Smart mode)
High-concerned ChemicalNoneNoneNone
OriginMainland ChinaMainland ChinaMainland China

Lighting Endurance (BR-2000 / BR-1200)

Lighting ModeHigh LightMedium LightLow LightFlashSOS Strobe
BR-2000 Battery Life4H6H8H10H10H
BR-2000 Lighting Range200m150m100m200m200m
BR-1200 Battery Life4.5H7.5H13H5H6H
BR-1200 Lighting Range120085045012001200

AI-1200 Usage Time in Each Mode (4500mAh Battery)

ModeDescriptionBattery Life
Mode 1Max brightness5 H
Mode 2Med brightness12 H
Mode 3Low brightness29 H
Mode 4Strobe35 H
Mode 5SOS signal48 H
Mode 6Flashing cyclically76 H
Mode 7More than5 H

*Full charge time is 6 hours.

4. Package Contents

The following items are included in your product package:

  • Lamp Host (Bicycle Headlight Unit)
  • Type-C USB Charging Cable
  • GoPro Base
  • User's Manual
  • Base Bracket
Package contents including headlight, USB cable, GoPro base, user manual, and base bracket.
Figure 4.1: Included accessories for the bicycle headlight.

5. Setup and Installation

5.1 Handlebar Installation

Follow these steps to install the headlight on your bicycle handlebar:

  1. Open the bracket screw cap.
  2. Fix the fixing seat to the handlebar and tighten the screw cap. Ensure the bracket is securely fastened. The bracket is applicable to handlebar diameters between 2.8 cm and 4 cm.
  3. Align the base of the headlight to the card position on the fixing seat.
  4. Rotate the headlight 90° to securely install it onto the bracket.
Four-step diagram showing how to install the bicycle headlight onto a handlebar bracket.
Figure 5.1: Handlebar installation steps.
Image showing the correct and incorrect ways to install the handlebar bracket, emphasizing proper alignment and tightening.
Figure 5.2: Correct handlebar bracket installation examples.

5.2 Extension Bracket and Helmet Mounting

The headlight supports mounting on an extension bracket (e.g., for Garmin devices) or directly on a helmet using the provided GoPro base. This advanced hoistable design offers versatile placement options.

Video 5.1: Demonstration of quick installation, various light modes, IPX6 waterproofing, extension bracket mounting, and helmet mounting options for the BR-2000 bicycle headlight.

6. Operating Instructions

6.1 Power On/Off and Mode Switching

The headlight features a power switch and a mode switching button for easy operation.

  • Power Button: Press and hold the power button to turn the light on or off.
  • Mode Button: Short press the mode button to cycle through the available lighting modes (e.g., Medium, High, Low, Flash, SOS Strobe).
Image showing the power switch and mode switching button on the top of the bicycle headlight.
Figure 6.1: Power and mode buttons on the headlight.

6.2 Smart Light Sensing Mode (AI-1200 and some BR models)

To activate the smart light sensing mode:

  1. Enter smart mode: The smart sensor indicator light (blue) will turn on. In this mode, both the vibrating component and the light-sensing component are active.
  2. Automatic Adjustment:
    • When ambient illuminance is less than 100 lux, the light will automatically switch to high-brightness (1200 lumens).
    • When ambient illuminance is greater than 100 lux, the light will start daytime flashing.
  3. Sleep Mode: After parking for 2 minutes, the lights will enter sleep mode. All indicator lights will turn off, and the vibrating component will detect movement to reactivate the smart mode.
Diagram explaining the smart light sensing mode, showing the blue indicator light and conditions for high brightness and daytime flashing.
Figure 6.2: Smart light sensing mode operation.

6.3 Battery Level Indicator

The power button also serves as a battery level indicator:

  • Green: 100% - 75% battery remaining.
  • Orange: 75% - 50% battery remaining.
  • Red: 50% - 25% battery remaining.
  • Red Flash: 25% - 1% battery remaining (recharge immediately).
Diagram showing the battery level indicator colors: Green for 100-75%, Orange for 75-50%, Red for 50-25%, and Red Flash for 25-1%.
Figure 6.3: Battery level indicator.

7. Maintenance

7.1 Charging

To charge your headlight:

  • Connect the provided Type-C USB cable to the charging port on the headlight.
  • Connect the other end of the USB cable to a suitable USB power source (e.g., computer, wall adapter, power bank).
  • The indicator light will show red during charging and turn green when charging is complete.
  • A full charge typically takes 6 hours.
  • The 4500mAh battery supports more than 1200 charging cycles.
Image showing the Type-C USB charging port with a silicone cover for waterproofing and dust protection.
Figure 7.1: USB Type-C charging port with protective cover.

7.2 Cleaning and Storage

  • Wipe the headlight with a soft, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
  • Ensure the Type-C charging port's silicone cover is properly sealed to maintain IPX6 waterproof integrity.
  • Store the headlight in a cool, dry place when not in use.

8. Troubleshooting

  • Light not turning on:
    • Check battery level. If red or flashing red, recharge the device.
    • Ensure the power button is pressed and held sufficiently to activate.
  • Light modes not changing:
    • Ensure the mode button is pressed briefly to cycle through modes.
    • If in smart mode, ambient light conditions might be overriding manual mode selection.
  • Charging issues:
    • Verify the USB cable is securely connected to both the headlight and the power source.
    • Try a different USB cable or power adapter.
  • Headlight overheating:
    • The aluminum alloy housing is designed for heat dissipation. Some warmth during prolonged use, especially on high settings, is normal.
    • If the light becomes excessively hot, reduce the brightness mode or turn it off to allow it to cool.

9. Warranty and Support

For warranty information and customer support, please refer to the specific terms provided at the point of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

Free Returns: This product may be eligible for free returns within 90 days, as per AliExpress policy.

Fast Delivery Guarantee: AliExpress offers fast delivery and potential compensation (e.g., $1.00 coupon) for late delivery, or refunds if the package is lost or items are damaged.

Security & Privacy: Your personal details are protected and not shared with third parties without consent. Payments are secure.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.