BEBONCOOL Q212 RGB Wireless Game Controller User Manual

1. Introduction

Thank you for purchasing the BEBONCOOL Q212 RGB Wireless Game Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS. Featuring customizable RGB lighting, programmable buttons, and advanced motion controls, the Q212 offers precision and versatility for a wide range of games. Please read this manual carefully to ensure proper setup and optimal performance.

2. Package Contents

• 1 x BEBONCOOL Q212 RGB Wireless Game Controller
• 1 x USB Type-C Charging Cable
• 1 x User Manual

3. Key Features

• RGB Lighting: 9 colors and 4 LED modes (Breath, Solid, Flash, Off) for personalized aesthetics.
• Multi-Platform Compatibility: Supports Nintendo Switch/Lite/OLED, iOS MFi (13.0 and above), Android HID Model, and Windows PC (wired connection for Windows 7/8/10/11 and above).
• Programmable Buttons: M1/M2 back macro buttons can map 1-16 combine functions from A/B/X/Y/L/ZL/R/ZR/L3/R3/D-pad keys. Supports single and multiple programming mapping.
• Adjustable Turbo Function: Auto/Manual Turbo mode with 3 adjustable speeds (5, 12, 20 shots/s).
• Dual Vibration Motors: 4-level vibration feedback (None, Weak, Medium, Strong) for enhanced immersion (Nintendo Switch/Windows PC only).
• High Capacity Battery: Built-in 800mAh battery provides over 16 hours of playtime with RGB LED lit mode, fully charged in approximately 3 hours.
• 6-Axis Gyro Sensor: High-sensitivity motion control for precise in-game actions (Nintendo Switch only).
• One-Key Wake Up: Quickly wake up and re-connect to your Nintendo Switch console.
• Linear Triggers: For precise input.

4. Specifications

5. Setup and Connection

5.1 Charging the Controller

Before first use, fully charge the controller using the provided USB Type-C cable. Connect the cable to the controller's USB-C port and the other end to a USB power source (e.g., console, PC, USB wall adapter). The charging indicator lights will show the charging status.

5.2 Connecting to Nintendo Switch/Lite/OLED (Wireless)

1. On your Nintendo Switch console, go to the HOME Menu.
2. Select 'Controllers' > 'Change Grip/Order'.
3. On the BEBONCOOL controller, press and hold the HOME button + Y button simultaneously for a few seconds until the LED indicators start flashing rapidly.
4. The controller will pair with the Switch. Once connected, the player indicator lights on the controller will light up solid.
5. You can also use the independent SYNC key for a one-key connection to the Switch console.

5.3 Connecting to PC (Wired)

The controller supports wired connection to Windows 7/8/10/11 and above for PC games that support X-Input and Steam.

1. Connect the USB Type-C cable to the controller's USB-C port.
2. Connect the other end of the USB cable to an available USB port on your PC.
3. The PC should automatically detect and install the necessary drivers.

5.4 Connecting to Android/iOS (Wireless)

The controller supports wireless connection to iOS MFi (13.0 and above) and Android HID Model devices.

1. Ensure Bluetooth is enabled on your Android or iOS device.
2. On the BEBONCOOL controller, press and hold the appropriate pairing button combination (refer to specific device instructions if different from Switch pairing).
3. On your device, search for Bluetooth devices and select the BEBONCOOL controller when it appears.
4. Once paired, the controller's LED indicators will stabilize.

6. Operating Instructions

6.1 RGB Lighting Modes

The controller features 9 colors and 4 LED modes for its rocker RGB color changing aperture. You can adjust the lighting effects using the dedicated light control button (often labeled 'M' or a light icon).

• Breath Mode: Lights fade in and out.
• Solid Light Mode: Lights remain constantly on in a chosen color.
• Flash Mode: Lights flash rapidly.
• OFF Mode: Lights are turned off.

Press the light control button to cycle through modes or turn off the lights. In combination with other buttons, it may allow color selection.

6.2 Programmable Buttons (M1/M2)

The M1 and M2 back buttons can be programmed to perform single or multiple key functions, enhancing your gameplay. These buttons can map A/B/X/Y/L/ZL/R/ZR/L3/R3/D-pad keys.

• Single Programming Mapping: Assign a single button press to M1 or M2.
• Multiple Programming Mapping: Assign a sequence of up to 16 button presses to M1 or M2.

Refer to the controller's specific programming instructions (usually involving holding a 'SET' or 'M' button and then the desired input) to configure these buttons.

6.3 Turbo Function

The Turbo function allows for rapid, repeated input of a button. It supports both Auto TURBO and Manual TURBO modes with three adjustable speeds: 5 shots/s, 12 shots/s, and 20 shots/s.

1. To activate Turbo: Press the TURBO button simultaneously with the desired action button (A/B/X/Y/L/R/ZL/ZR).
2. To adjust Turbo speed: While Turbo is active, press the TURBO button and move the right analog stick up or down to cycle through the speeds.
3. To deactivate Turbo: Repeat step 1, or press the TURBO button and the action button twice.

6.4 Vibration Adjustment (Nintendo Switch/Windows PC Only)

The controller features dual vibration motors with 4 levels of feedback: None, Weak, Medium, and Strong. Use the independent vibration control button to cycle through these levels and customize your haptic feedback.

6.5 Motion Control (Nintendo Switch Only)

The high-sensitivity 6-axis gyro sensor provides precise motion control for compatible Nintendo Switch games, allowing for immersive gameplay where tilting and shaking the controller translates to in-game actions.

6.6 One-Key Wake Up (Nintendo Switch Only)

To quickly wake up your Nintendo Switch console from sleep mode and re-connect the controller, simply press and hold the HOME button for 2 seconds.

7. Maintenance

• Keep the controller dry and away from extreme temperatures.
• Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Avoid dropping or subjecting the controller to strong impacts.
• When not in use for extended periods, store the controller in a safe place and charge it periodically to maintain battery health.

8. Troubleshooting

Controller does not connect/pair:

• Ensure the controller is sufficiently charged.
• Verify you are using the correct pairing method for your device (e.g., HOME + Y for Switch).
• Make sure Bluetooth is enabled on your device (for wireless connections).
• Try restarting your console/device and the controller.
• For PC, ensure the USB cable is securely connected and try a different USB port.

Vibration not working:

• Check if the vibration function is enabled in your game settings or console settings.
• Ensure the controller's vibration level is not set to 'None' using the independent vibration control button.
• Note that vibration is only supported on Nintendo Switch and Windows PC.

Programmable buttons (M1/M2) not working:

• Ensure you have correctly followed the programming instructions for M1/M2 buttons.
• Reset the controller to factory settings if programming issues persist (refer to specific reset instructions in the full manual if available).

Controller not compatible with Xbox:

• This controller is not compatible with Xbox consoles (Xbox One, Xbox Series S/X, Xbox 360). It is designed for Nintendo Switch, PC, Android, and iOS platforms.

9. User Tips

• For optimal performance on PC, always use a wired USB connection.
• Experiment with the different RGB lighting modes and colors to match your gaming setup or mood.
• Utilize the programmable M1/M2 back buttons for complex commands or frequently used actions to gain a competitive edge.
• Adjust the Turbo speed according to the game and your personal preference for rapid-fire actions.
• If experiencing input lag on wireless connections, ensure there are no obstructions or excessive interference between the controller and your device.

10. Warranty and Support

BEBONCOOL products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official BEBONCOOL website.