Monzlteck DP-05

Contents

Monzlteck Under Desk Mount for PlayStation 5 / PS5 Slim

Model: DP-05 | Brand: Monzlteck

Introduction

The Monzlteck DP-05 Under Desk Mount is designed to securely hold your PlayStation 5 (both Disc and Digital Editions) or PS5 Slim console beneath your desk. This mount offers a space-saving solution, keeps your gaming area tidy, and ensures optimal airflow for your console's cooling system. Made from durable cold-rolled steel with a powder-coat finish, it provides a sturdy and discreet way to store your console.

PlayStation 5 console mounted discreetly under a desk

Image: PlayStation 5 console mounted discreetly under a desk, showcasing the space-saving design.

Package Contents

  • Monzlteck Under Desk Mount (2 pieces)
  • M4x16 Screws (6 pieces)
  • M3x18 Security Screw (1 piece)
  • Silicone Protective Covers (4 pieces)
Components of the Monzlteck under desk mount, including metal brackets, silicone covers, and screws

Image: Components of the Monzlteck under desk mount, including metal brackets, silicone covers, and screws for installation.

Setup and Installation

Follow these steps to install your Monzlteck Under Desk Mount:

  1. Identify the desired location under your desk for the mount. Ensure there is enough space for the console and proper ventilation.
  2. Position one of the mount brackets and mark the screw holes on the underside of your desk.
  3. Pre-drill pilot holes at the marked locations.
  4. Secure the first bracket to the desk using three M4x16 screws.
  5. Repeat steps 2-4 for the second bracket, ensuring it is correctly aligned with the first bracket to accommodate your PS5 console. Refer to the dimensions diagram for proper spacing.
  6. Attach the four silicone protective covers to the contact points of the brackets to prevent scratching your console.
  7. Carefully slide your PlayStation 5 console into the installed brackets.
  8. Insert the M3x18 security screw to lock the console firmly in place within the bracket, preventing accidental dislodgement.
Diagram showing six steps for installing the under desk mount for PS5

Image: Step-by-step diagram illustrating the installation process of the under-desk mount.

A hand using a power drill to install the mount under a desk

Image: A power drill being used to secure the mount to the underside of a desk.

Operating Instructions

Once installed, the Monzlteck Under Desk Mount provides a stable and accessible location for your PlayStation 5 console.

  • Console Placement: Gently slide your PS5 (Disc or Digital Edition) or PS5 Slim into the mounted brackets. Ensure it sits securely on the silicone covers.
  • Security: Use the provided M3x18 security screw to further secure the console within the mount, preventing any movement during use.
  • Cable Management: Utilize the space around the mount to route power, HDMI, and other cables, contributing to a clean and organized setup.

Video: Demonstration of the PlayStation 5 console being placed into and secured by the under-desk mount.

Maintenance

  • Cleaning: Wipe the metal mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
  • Screw Check: Periodically check all mounting screws to ensure they remain tight and secure.
  • Silicone Covers: Inspect the silicone covers for wear and tear. Replace if necessary to maintain console protection.

Troubleshooting

  • Console Overheating: Ensure the mount's hollow design is not obstructed and that the console's vents have clear access to air. The design is intended to promote airflow, as shown in the diagram below.
  • Mount Feels Unstable: Double-check that all six M4x16 screws are fully tightened into the desk and that the M3x18 security screw is securing the console to the bracket.
  • Scratches on Console: Verify that all four silicone protective covers are correctly installed on the mount's contact points before placing the console.
Diagram showing airflow around a PS5 console mounted under a desk, indicating proper ventilation

Image: Airflow diagram demonstrating how the mount's design facilitates cooling for the PS5.

Specifications

AttributeDetail
BrandMonzlteck
Model NumberDP-05
Material2mm Cold-Rolled Steel, Powder-Coat Finish
ColorBlack
CompatibilityPlayStation 5 (Disc & Digital Edition), PS5 Slim
Fastening TypeBracket (Screw-mounted)
Dimensions (Approximate)Length: 365mm, Width: 160mm, Height: 130mm (Refer to diagram for detailed measurements)
OriginMainland China
Detailed dimensions diagram of the Monzlteck under desk mount

Image: Detailed dimensions of the mount, showing length, width, and height measurements.

User Tips

  • Maximize Space: Many users appreciate how this mount frees up valuable desk space, making your gaming setup cleaner and more organized.
  • Improved Cooling: The open design of the mount helps prevent the console from overheating, as noted by users who experienced better performance.
  • Sturdy Installation: Ensure all screws are firmly tightened during installation for a secure and stable hold, as confirmed by multiple positive reviews.
  • Easy Setup: The installation process is straightforward and can be completed quickly with basic tools.
  • PS5 Slim Compatibility: The mount is also compatible with the PS5 Slim, offering versatility for different console models.
PS5 Slim console mounted under a desk, demonstrating compatibility

Image: PS5 Slim console securely mounted under a desk, highlighting its compatibility.

Warranty and Support

For any questions, concerns, or support regarding your Monzlteck Under Desk Mount, please contact the manufacturer or seller directly. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.