1. Introduction
This manual provides detailed instructions for the proper use and maintenance of the Gimbal PTZ Flat Cable Test Tool and the compatible PTZ Cable for DJI Mini 3 Pro and DJI Mini 3 drones. Please read this manual thoroughly before use to ensure correct operation and to prevent damage to the components or your drone.
2. Product Components
The product typically includes one of the following:
- Gimbal PTZ Flat Cable Test Tool: A circuit board designed to test the connection and disconnection of the PTZ flat cable.
- PTZ Cable: A flexible coaxial signal transmission line for the camera gimbal.
Please verify your purchase to confirm which component(s) are included.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Rivertown |
| Compatible Drone Brand | DJI |
| Compatible Drone Model | For DJI Mavic Mini 3, For DJI Mini 3 Pro |
| Model Number | For DJI Mini 3 Pro |
| Condition | Original and New |
| Size | Brand New |
| Weight | 2g |
| Package | No |
| Origin | Mainland China |
4. Setup
To set up the Gimbal PTZ Flat Cable Test Tool:
- Connect the test tool to a power source using a USB cable. A red LED labeled "Power" should illuminate, indicating the tool is powered on.
- Carefully connect one end of the PTZ flat cable to the designated "Core Board" port on the test tool.
- Connect the other end of the PTZ flat cable to the corresponding ports for "Camera", "Roll M", or "Yaw M" on the test tool, depending on the section of the cable you wish to test.
5. Operation
The test tool is designed to check the continuity of the PTZ flat cable. Once the cable is properly connected to the test tool and powered on:
- Observe the series of small LEDs on the test tool.
- If the cable connections are good, the corresponding LEDs for the connected sections (Camera, Roll M, Yaw M) will illuminate green.
- If any LED remains off or shows an incorrect color, it indicates a potential issue with that specific line or connection within the cable.
6. Maintenance
To ensure the longevity and proper functioning of your test tool and PTZ cable:
- Keep the test tool and cables clean and free from dust and debris.
- Store in a dry, cool place away from direct sunlight and extreme temperatures.
- Avoid bending or creasing the PTZ flat cable excessively, as this can damage the internal conductors.
- When disconnecting cables from the test tool, always use tweezers or a similar delicate tool to gently release the connectors. Avoid pulling directly on the cable.
7. Troubleshooting
If you encounter issues while using the test tool:
- No LEDs light up: Ensure the USB power cable is securely connected to the test tool and a working power source. Check if the red "Power" LED is illuminated.
- Some LEDs are not green: This indicates a break or poor connection in the corresponding line of the PTZ cable. Re-seat the cable connectors firmly. If the issue persists, the PTZ cable may be faulty and require replacement.
- Difficulty connecting/disconnecting cables: Always use tweezers to carefully remove the cable. Violent disassembly can damage the delicate ports on the test tool or the cable itself.
8. User Tips
- When handling the PTZ cable, always be gentle. The flat design makes it susceptible to damage from sharp bends or excessive force.
- Before performing any repairs or replacements on your drone, ensure the drone's power is completely off and the battery is removed.
- Keep the test tool and cables in their original packaging or a protective case when not in use to prevent accidental damage.
9. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
10. Safety Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
