1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Shimano Acera Altus M360 24S Groupset. This groupset is designed for mountain bikes (MTB) and folding bikes, offering reliable 3x8 speed shifting performance. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Safety Information
Important Safety Precautions:
- Always compare the size of the components with your old model before purchasing to avoid acquiring inappropriate sizes.
- If you lack installation experience, it is highly recommended to visit a local bicycle repair shop and have professionals assist with the installation. Improper installation can lead to malfunction or injury.

3. Components Overview
The Shimano Acera Altus 24S Groupset typically includes the following components:

3.1. Rear Derailleurs
The groupset may include either the Shimano Acera RD-M360 or the Shimano Altus RD-M310 rear derailleur.

Shimano Acera RD-M360 Rear Derailleur
- Model: Acera M360
- Speed: 8S (also compatible with 7S)
- Material: Aluminum alloy body, Resin pulley
- Weight: Approximately 306g
- Application: MTB/Folding Bike



Shimano Altus RD-M310 Rear Derailleur
- Model: Altus M310
- Speed: 8S (also compatible with 7S)
- Material: Aluminum alloy body, Resin pulley
- Weight: Approximately 302g
- Application: MTB/Folding Bike




3.2. Shifters
The groupset includes Shimano SL-M315 shifters for both left (3-speed) and right (8-speed) sides.

Shimano SL-M315-L (Left Shifter)
- Type: RAPIDFIRE PLUS - Left Shift Lever - Clamp Band - 3-speed
- Features: Light shifting operation, wider compatibility, suitable for internal cable routing, slim main lever body, streamlined cockpit experience, gear display positioned below the handlebar, numbered gear display, OPTICAL GEAR DISPLAY.
- Clamp Diameter: Φ22.2MM


Shimano SL-M315-R (Right Shifter)
- Type: RAPIDFIRE PLUS - Right Shift Lever - Clamp Band - 8-speed
- Features: Reliable mountain bike shifting, ability to downshift three gears in one stroke, light shifting operation, wider compatibility, suitable for internal cable routing, slim main lever body, streamlined cockpit experience, gear display positioned below the handlebar, numbered gear display, OPTICAL GEAR DISPLAY.
- Clamp Diameter: Φ22.2MM



3.3. Cassette
The groupset includes a Shimano CS-HG31-8S 8-speed cassette, available in 32T or 34T options.
Shimano CS-HG31-8S Cassette (32T)
- Model: CS-HG31-8S
- Type: Cassette flywheel
- Speed Ratio: 8/24 speed
- Weight: Approximately 305g
- Gear Ratio: 11-13-15-18-21-24-28-32T
- Applicable Models: Mountain bike, station wagon, folding bike


Shimano CS-HG31-8S Cassette (34T)
- Model: CS-HG31-8S
- Type: Cassette flywheel
- Speed Ratio: 8/24 speed
- Weight: Approximately 305g
- Gear Ratio: 11-13-15-17-20-23-26-34T
- Applicable Models: Mountain bike, station wagon, folding bike



3.4. Chain
The groupset includes a chain from either SHIMANO (CN-HG71/CN-HG40) or KMC (X8PL).
- Brand: SHIMANO/KMC
- Models: SHIMANO CN-HG71, SHIMANO CN-HG40, KMC X8PL
- Links: 112 Links


4. Specifications
Detailed specifications for each component are provided below. For a complete user manual with detailed diagrams and installation instructions, please refer to the official Shimano documentation. A PDF user manual may be available from the seller: User manual (PDF).
4.1. General Groupset Specifications
| Feature | Description |
|---|---|
| Brand | SHIMANO |
| Gears | 24 Speed (3x8) |
| Components | Derailleurs |
| Material | Alloy (Derailleur body: Aluminum alloy) |
| Origin | Mainland China |
4.2. Rear Derailleur Specifications
| Model | Series | Speed | Max Freewheel Teeth | Weight |
|---|---|---|---|---|
| RD-M360 | Acera | 3x8S (7-Speed compatible) | 42T | ~306g |
| RD-M310 | Altus | 3x8S (7-Speed compatible) | 34T max, 11T min | ~302g |
4.3. Shifter Specifications
| Model | Type | Speed | Features |
|---|---|---|---|
| SL-M315-L | RAPIDFIRE PLUS Left Shift Lever | 3-Speed | Clamp Band, Optical Gear Display, Internal Cable Routing Compatible |
| SL-M315-R | RAPIDFIRE PLUS Right Shift Lever | 8-Speed | Clamp Band, Optical Gear Display, Internal Cable Routing Compatible, Downshift 3 gears in one stroke |
4.4. Cassette Specifications
| Model | Type | Speed | Gear Ratio (Teeth) | Weight |
|---|---|---|---|---|
| CS-HG31-8S (32T) | Cassette flywheel | 8-Speed | 11-13-15-18-21-24-28-32T | ~305g |
| CS-HG31-8S (34T) | Cassette flywheel | 8-Speed | 11-13-15-17-20-23-26-34T | ~305g |
4.5. Chain Specifications
| Brand | Model | Links |
|---|---|---|
| SHIMANO | CN-HG71 | 112 |
| SHIMANO | CN-HG40 | 112 |
| KMC | X8PL | 112 |
5. Setup and Installation
Installing a bicycle groupset requires specific tools and technical knowledge. If you are not confident in your abilities, please seek professional assistance (refer to Safety Information). The following is a general guide; always consult the detailed instructions provided with individual components or the official Shimano technical documents for precise steps.
5.1. Tools Required (General)
- Hex wrenches (various sizes)
- Chain whip
- Cassette lockring tool
- Chain breaker/master link pliers
- Cable cutters
- Torque wrench (recommended)
- Grease and anti-seize compound
5.2. Installation Steps (General)
- Remove Old Components: Carefully remove your existing rear derailleur, shifters, cassette, and chain.
- Install Cassette: Slide the new CS-HG31-8S cassette onto the freehub body. Ensure all cogs are correctly aligned. Secure with the cassette lockring tool, tightening to the manufacturer's specified torque.
- Install Rear Derailleur: Mount the RD-M310 or RD-M360 rear derailleur onto the derailleur hanger. Ensure it is properly aligned and tightened.
- Install Shifters: Attach the SL-M315-L (left) and SL-M315-R (right) shifters to your handlebars. Position them ergonomically and tighten the clamp bands.
- Route Cables: Thread the shift cables through the shifters and along your bike frame, ensuring smooth routing without sharp bends. Connect the cables to the respective derailleurs.
- Install Chain: Measure the correct chain length for your bike and groupset. Install the new 112-link chain (CN-HG71, CN-HG40, or KMC X8PL), using a chain breaker or master link as appropriate.
- Adjust Derailleurs: Perform initial adjustments for both front and rear derailleurs. This involves setting limit screws (H/L) and cable tension to ensure smooth and precise shifting across all gears.
- Final Checks: Double-check all bolts and fasteners for proper tightness. Test shifting thoroughly while the bike is stationary and then on a test ride.
6. Operating Instructions
6.1. Shifting Gears
Your Shimano SL-M315 shifters utilize the RAPIDFIRE PLUS system for quick and intuitive gear changes.
- Right Shifter (Rear Derailleur - 8-Speed): Use the right shifter to control the rear derailleur and change gears on your cassette.
- Push the larger lever (shift key) with your thumb to shift to a larger cog (easier gear).
- Pull the smaller lever with your index finger to shift to a smaller cog (harder gear). The SL-M315-R allows downshifting up to three gears in a single stroke.
- Left Shifter (Front Derailleur - 3-Speed): Use the left shifter to control the front derailleur and change chainrings.
- Push the larger lever (shift key) to shift to a larger chainring.
- Pull the smaller lever to shift to a smaller chainring.
- Optical Gear Display: Both shifters feature an optical gear display, positioned below the handlebar, which visually indicates your current gear position at a glance.
6.2. Smooth Shifting Tips
- Always pedal lightly when shifting gears to reduce stress on the drivetrain and ensure smoother transitions.
- Avoid shifting under heavy load (e.g., climbing a steep hill) as this can cause harsh shifts and premature wear.
- Anticipate terrain changes and shift proactively.
7. Maintenance
Regular maintenance will prolong the life and performance of your groupset.
7.1. Cleaning
- Chain: Clean your chain regularly, especially after riding in wet or dirty conditions. Use a degreaser and a chain brush, then rinse thoroughly.
- Cassette & Derailleurs: Clean the cassette cogs and derailleur pulleys with a brush and degreaser to remove accumulated grime.
7.2. Lubrication
- Chain: After cleaning and drying, apply a suitable bicycle chain lubricant to each link. Wipe off excess lubricant.
- Derailleur Pivots: Occasionally apply a small amount of light oil to the pivot points of the front and rear derailleurs.
7.3. Adjustments
- Cable Tension: Over time, shift cables can stretch, leading to imprecise shifting. Adjust cable tension using the barrel adjusters on your shifters or derailleurs.
- Limit Screws: Periodically check and adjust the high (H) and low (L) limit screws on your derailleurs to prevent the chain from overshifting off the cassette or chainrings.
7.4. Inspection
- Regularly inspect your chain for wear using a chain wear indicator tool. Replace the chain when it shows significant wear to prevent damage to the cassette and chainrings.
- Check derailleur hangers for bends or damage. A bent hanger can cause poor shifting.
- Ensure all bolts are securely tightened.
8. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shifting is slow or imprecise | Stretched cable, dirty cable housing, bent derailleur hanger, worn chain/cassette | Adjust cable tension, clean/replace cables, check/straighten hanger, replace worn components |
| Chain skips gears | Worn chain/cassette, incorrect derailleur adjustment, bent hanger | Replace worn chain/cassette, adjust derailleurs, check/straighten hanger |
| Chain falls off cassette/chainrings | Incorrect limit screw adjustment | Adjust H/L limit screws on derailleurs |
| Shifter feels stiff or hard to push | Dirty or corroded shift cable/housing | Clean and lubricate cables, replace cable and housing if necessary |
9. User Tips
- For optimal performance, ensure your chain is always clean and adequately lubricated. This significantly impacts shifting smoothness and component longevity.
- When replacing components, especially the chain and cassette, it's often beneficial to replace them together if they have similar wear, as a new chain on a worn cassette can lead to skipping.
- Consider using a torque wrench for installation to ensure all components are tightened to their manufacturer-specified values, preventing damage or loosening during use.
10. Warranty and Support
For warranty information, please refer to the official Shimano website or contact your point of purchase. Keep your proof of purchase for any warranty claims. For technical support, consult authorized Shimano service centers or your local bicycle mechanic.