Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ATOTO OBD2 Scanner Bluetooth ELM327 V1.5. This device is designed to work with Android car radios and Android phones, allowing you to diagnose vehicle issues and monitor performance data.
The ATOTO OBD2 Scanner is a 100% original ELM327 V1.5 device, known for its high quality and stable performance. It supports various diagnostic applications, with Torque Pro (Android) and DashCommand being recommended.
Product Overview
The ATOTO OBD2 Scanner is a compact diagnostic interface that connects to your vehicle's OBDII port. It communicates via Bluetooth to an Android device, displaying real-time vehicle data and diagnostic trouble codes (DTCs).

Image: ATOTO OBD2 Scanner, highlighting Bluetooth, Android compatibility, 16-pin OBD2, and a 365-day warranty.
Key Features:
- Bluetooth Connectivity
- Compatible with Android Car Radios and Android Phones
- Supports ELM327 V1.5 protocol
- Reads and clears Diagnostic Trouble Codes (DTCs)
- Monitors real-time sensor data
- Compact "Mini OBDII" design
Setup Guide
1. Physical Installation
- Locate your vehicle's OBDII 16-pin port. This is typically found under the dashboard on the driver's side.
- Ensure the vehicle's engine is turned off.
- Plug the ATOTO OBD2 Scanner into the OBDII port. It should fit snugly.
- Turn on the engine after the scanner is connected. A red indicator light on the scanner should illuminate, indicating power.
Video: Demonstrates the physical installation of the Mini OBDII scanner into a car's OBD port and subsequent Bluetooth pairing with an ATOTO car radio.

Image: Shows the compact size of the Mini OBDII scanner (43mm L x 25mm W x 23mm H) and its retail packaging, which includes a QR code for software download.
2. Software Installation (Torque App Example)
The ATOTO OBD2 Scanner requires a compatible diagnostic application to function. Torque Pro (Android) and DashCommand are recommended. This guide uses Torque as an example.
- **Get the App**: Download Torque Pro (Android) or DashCommand from the Google Play Store. Alternatively, scan the QR code on the back of the scanner's box for a direct download link.
- **Install Software**: Follow the on-screen prompts to install the application on your Android phone or ATOTO car radio. Grant necessary permissions.

Image: Step-by-step guide for installing the Torque app on an Android device, including copying the APK and confirming installation.
3. Bluetooth Connection
- **Enable Bluetooth**: On your Android phone or car radio, go to Bluetooth settings and ensure Bluetooth is enabled.
- **Pair with OBDII**: Search for available devices. The scanner should appear as "OBDII". Select it to pair.
- **Enter PIN**: If prompted, enter the pairing PIN. Common PINs are "0000" or "1234".
- **Launch App & Configure**:
- Launch the Torque app.
- Go to the app's settings (usually accessible via a menu button or gear icon).
- Navigate to "OBD2 Adapter Settings".
- Choose "Connection type" as "Bluetooth".
- Select "Choose Bluetooth Device" and pick "OBDII" from the list.
- Restart the Torque app. If the green light on the OBD2 adapter blinks, it indicates a successful connection.

Image: Illustrates the Bluetooth pairing process on an Android device, showing how to search for "OBDII", enter the PIN "1234", and confirm connection.

Image: Shows how to configure the Torque app to use Bluetooth for the OBD2 adapter, including selecting connection type and device.

Image: Displays the Torque app interface confirming successful connection to the ECU and showing various real-time gauges.
Operating Instructions
Once connected, the diagnostic application (e.g., Torque) will allow you to access various vehicle parameters.
Using the Torque App:
- **Realtime Information**: View live sensor data such as engine RPM, coolant temperature, vehicle speed, fuel system status, and more.
- **Fault Codes**: Read and clear Diagnostic Trouble Codes (DTCs) and turn off the Check Engine Light (CEL).
- **Performance Data**: Monitor performance metrics like 0-60 mph times, quarter-mile times, and horsepower.
- **Fuel Economy**: Track fuel consumption and calculate enhanced MPG.
- **Customizable Dashboards**: Create custom dashboards with gauges and graphs to display the data most relevant to you.

Image: Examples of the Torque app interface displayed on an ATOTO Android car radio, showing various gauges and data points.

Image: Examples of the Torque app interface displayed on an Android phone, showing various diagnostic screens and data.
Note: Some advanced features or alternative diagnostic applications may require a paid subscription or purchase. Choose software based on your specific needs.
Maintenance
The ATOTO OBD2 Scanner is a low-maintenance device. Follow these guidelines to ensure its longevity:
- Keep the device clean and free from dust and moisture.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- When not in use, you may unplug the device from the OBDII port to prevent minor battery drain, although it is designed for low power consumption.
- Do not attempt to open or modify the device, as this will void the warranty.
Troubleshooting
Common Issues and Solutions:
- **Device not powering on (no red light)**:
- Ensure the scanner is fully inserted into the OBDII port.
- Check if the vehicle's ignition is on or the engine is running (some vehicles require this for power to the OBD port).
- Verify the vehicle's OBDII port is functional (try another OBD2 device if available).
- **Bluetooth pairing issues**:
- Make sure Bluetooth is enabled on your Android device.
- Ensure the scanner is within range.
- Try unpairing and re-pairing the device.
- Confirm the correct PIN (0000 or 1234) is entered.
- Restart both the Android device and the vehicle.
- **App not connecting to ECU / "Adapter Error Count"**:
- Verify that the correct Bluetooth device ("OBDII") is selected in the app's settings.
- Restart the diagnostic application.
- Ensure the vehicle's engine is running for full ECU communication.
- Some vehicles may require specific settings within the app; consult the app's documentation or support.
- If the issue persists, try uninstalling and reinstalling the diagnostic app.
- **No data or incorrect readings**:
- Ensure the app is fully connected to the ECU.
- Check if your vehicle is OBDII compliant (most vehicles manufactured after 1996 in the US, 2001 in Europe, and 2008 in Japan are).
- Some parameters might not be supported by all vehicles or diagnostic apps.
For further assistance, please contact ATOTO customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | ATOTO |
| Model | AC4450 (ELM327 V1.5) |
| Item Type | Code Readers & Scan Tools |
| Special Features | Bluetooth |
| Hardware Version | EML327 V1.5 |
| Software Version | V1.5 |
| Software Update | Yes |
| Supported Languages | Arabic, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Slovenian, Spanish, Thai, Turkish |
| Origin | Mainland China |
| Certifications | CE, FCC, RoHS |
| Dimensions (approx.) | 43 mm (1.6 in) L x 25 mm (0.98 in) W x 23 mm (0.9 in) H |
| Weight (approx.) | 0.05 kg |
Warranty and Support
Your ATOTO OBD2 Scanner comes with a 180-day warranty, ensuring quality and stability. ATOTO also provides lifetime technical support for this product.
Support Information:
- **Technical Support**: For any issues or questions regarding setup, operation, or troubleshooting, please contact ATOTO customer support.
- **Software Updates**: The device supports software updates. Refer to the diagnostic application's documentation for update procedures.
User Tips
- **Initial Setup**: Remember that after installing the diagnostic software, you still need to configure it to connect to the OBD2 scanner via Bluetooth. Detailed tutorials are often available within the app or from the manufacturer.
- **App Choice**: While Torque Pro and DashCommand are recommended, the scanner is compatible with other diagnostic applications. Be aware that some apps may require a fee.
- **Vehicle Compatibility**: The scanner is generally compatible with most OBDII-compliant vehicles. This includes many Japanese cars, as well as models like the Nissan Qashqai 2016 and Suzuki Spresso, provided they are OBDII compliant. For older or less common vehicles, verify OBDII compliance.
- **Language Support**: The diagnostic software typically supports multiple languages, including English, Spanish, French, German, and many others, allowing for a localized user experience.
- **Connection Stability**: If experiencing intermittent connections, ensure no other Bluetooth devices are interfering and that the scanner is firmly seated in the OBDII port.