ALXUM Y-1039

Contents

ALXUM USB 3.0 to SATA Hard Drive Adapter

Model: Y-1039

1. Product Overview

The ALXUM USB 3.0 to SATA Hard Drive Adapter provides a convenient solution for connecting 2.5-inch or 3.5-inch SATA HDDs (Hard Disk Drives) and SSDs (Solid State Drives) to your computer via a USB 3.0 port. This adapter is designed for easy data transfer, backup, and recovery, offering high-speed performance and broad compatibility.

ALXUM USB 3.0 to SATA Adapter
ALXUM USB 3.0 to SATA Adapter with connected cables.
Weme USB 3.0 to SATA Adapter Cable
Weme USB 3.0 to SATA Adapter Cable with its branding.

2. Key Features

  • Universal Compatibility: Supports all 2.5-inch and 3.5-inch SATA I/II/III HDD/SSD drives.
  • High-Speed Data Transfer: USB 3.0 transmission with UASP support for speeds up to 5Gbps.
  • Plug & Play: No drivers or additional software required for most operating systems.
  • Hot-Swapping: Allows for connecting and disconnecting drives without restarting your computer.
  • External Power Supply: Includes a 12V/2A power adapter for stable operation, especially with 3.5-inch HDDs.
  • LED Indicator: Built-in LED light indicates power and activity status.
  • Auto Sleep Mode: Features a 30-minute auto sleep mode to conserve energy and extend drive lifespan.
  • Multi-Protection: Incorporates over-voltage, over-circuit, and over-current protection for device safety.
Multi-Protection Features
Diagram illustrating the multi-protection features: Over-Voltage, Over-Circuit, Over-Current Protection.
USB 3.0 Data Transfer Speed
Comparison of USB 3.0 (5Gbps / 450MB/s) and USB 2.0 (60MB/s) data transfer speeds.

3. Package Contents

Please check the box for the following items:

  • 1 x SATA to USB Converter (Model Y-1039)
  • 1 x USB 3.0 Cable
  • 1 x 12V/2A DC Power Adapter
  • 1 x User Manual (this document)
Package Contents
Image showing the adapter, USB cable, power adapter, and product box.

4. Setup and Installation

Follow these steps to connect your SATA drive to your computer:

  1. Connect the Hard Drive: Firmly attach your 2.5-inch or 3.5-inch SATA HDD/SSD to the SATA interface on the adapter. Ensure a secure connection.
  2. Connect USB to Computer: Plug the USB 3.0 connector of the adapter cable into an available USB 3.0 port on your computer (PC or laptop).
  3. Connect Power Adapter (for 3.5-inch HDDs): If you are using a 3.5-inch HDD, or if the LED light on the adapter does not illuminate for a 2.5-inch drive, connect the included 12V/2A DC power adapter to the adapter's DC power port and then to a power outlet. This provides the necessary power for larger drives.
  4. Verify Connection: The LED light on the adapter should turn on, indicating a successful power connection. Your operating system should automatically detect the connected drive.
How to use the SATA adapter
Diagram showing how to connect 3.5-inch HDD, 2.5-inch HDD, and 2.5-inch SSD to the adapter and then to a PC or laptop.
Power Adapter Connection
Image demonstrating the connection of the 12V/2A power adapter for 3.5-inch HDDs.
Adapter connected to 3.5 inch HDD and laptop
The adapter connected to a 3.5-inch HDD, with the power adapter, and then to a laptop.
Adapter connected to 2.5 inch HDD and laptop
The adapter connected to a 2.5-inch HDD and a laptop, typically without the need for external power.

5. Operating Instructions

Once the drive is connected and recognized by your computer, it will function like any other external storage device.

  • Accessing Data: Open 'File Explorer' (Windows) or 'Finder' (macOS) to browse the contents of your connected drive.
  • Data Transfer: Drag and drop files to and from the connected drive for quick and efficient data transfer.
  • Hot-Swapping: The adapter supports hot-swapping, allowing you to connect and disconnect drives without needing to power down your computer. Always safely eject the drive from your operating system before physically disconnecting it to prevent data corruption.
  • Auto Sleep Mode: The adapter will automatically enter sleep mode after 30 minutes of inactivity to save power and reduce wear on the drive. It will wake up automatically upon access.
Hot-swapping and Plug & Play
Image demonstrating the plug-and-play functionality and hot-swapping capability with a laptop.
Official product video demonstrating the connection and data transfer process with the SATA to USB 3.0 converter.

6. Specifications

AttributeValue
Brand NameALXUM
Model NumberY-1039
TypeSATA Cables
PackageYes
OriginMainland China
CertificationCE
InterfaceUSB 3.0 to SATA
Power Supply12V/2A DC Power Adapter (included)
Supported Drive Sizes2.5-inch / 3.5-inch SATA HDD/SSD
Max Capacity SupportUp to 12TB
Operating SystemsWindows, Linux, macOS
Adapter Port Diagram
Detailed diagram of the adapter's ports: LED Light, Micro USB3.0, DC 12V Power, and SATA Interface.

7. Troubleshooting

  • Drive Not Detected:
    • Ensure all cables are securely connected.
    • For 3.5-inch HDDs, always use the provided 12V/2A power adapter.
    • Try connecting to a different USB port on your computer.
    • Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but uninitialized or unformatted.
  • Slow Transfer Speeds:
    • Ensure you are connected to a USB 3.0 port on your computer. USB 2.0 ports will limit speeds.
    • Verify that your operating system and drive support UASP for optimal performance.
  • Adapter Does Not Power On (No LED):
    • Ensure the USB cable is firmly connected to both the adapter and the computer.
    • If using a 3.5-inch HDD, confirm the 12V/2A power adapter is correctly plugged into the adapter and a live power outlet.
  • Compatibility with Optical Drives: This adapter is primarily designed for SATA HDDs and SSDs. While some users may attempt to connect SATA optical drives (CD/DVD/Blu-ray), official support and full functionality are not guaranteed.
  • Data Recovery from Damaged Drives: The Weme USB 3.0 to SATA Cable CANNOT work to retrieve data from a physically crashed or severely damaged hard drive. It is intended for functional drives.

8. User Tips

  • Maximize Capacity: This adapter supports drives up to 12TB, allowing you to connect high-capacity storage for extensive data needs.
  • Power for 3.5" Drives: Always use the external 12V/2A power adapter when connecting 3.5-inch hard drives to ensure stable operation and prevent data loss. 2.5-inch drives typically draw enough power from the USB port, but the external power can be used for added stability if needed.
  • Safe Ejection: Before disconnecting the adapter or drive, always use your operating system's "Safely Remove Hardware" (Windows) or "Eject" (macOS) function to prevent data corruption.
  • Portability: Its portable and slim design makes it ideal for on-the-go data access or quick diagnostics.

9. Maintenance

  • Keep the adapter and cables clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or modify the adapter, as this will void any potential warranty and could cause damage.
  • Store the adapter in a safe place when not in use to prevent physical damage.

10. Warranty and Support

ALXUM provides customer support for its products. For any technical issues, questions, or warranty claims, please refer to the seller's contact information or the official ALXUM website for assistance. Please note that the seller states they strive to escort their product for 2 years to every customer.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.