ALXUM Y-3322A

Contents

ALXUM USB 3.0 to SATA IDE Adapter Instruction Manual

Model: Y-3322A

Product Overview

The ALXUM USB 3.0 to SATA IDE Adapter is a versatile tool designed for connecting various types of storage devices, including 2.5-inch and 3.5-inch IDE/SATA HDDs, SSDs, CD-ROM, CD-RW, COMBO, DVD-ROM, DVD-RW, DVD+RW, and DVD-RAM optical drives, to your computer via a USB 3.0 interface. This adapter facilitates easy data transfer, backup, and recovery, supporting up to three drives simultaneously with a maximum capacity of 18TB.

ALXUM USB 3.0 to SATA IDE Adapter with power cable and USB 3.0 cable
ALXUM USB 3.0 to SATA IDE Adapter with included cables.

Setup Guide

Package Contents

  • 1 x USB 3.0 IDE to SATA adapter
  • 1 x USB 3.0 Cable
  • 1 x 12V/2A Power Adapter
  • 1 x 4PIN Power Cable
  • 1 x CD Driver
  • 1 x Introduction Manual

Connecting Hard Drives

The adapter supports simultaneous connection of up to three hard drives: two IDE drives and one SATA drive. No drivers are needed for basic plug-and-play functionality on most operating systems.

Diagram showing how to connect 2.5 inch IDE, 3.5 inch IDE, and 2.5/3.5 inch SATA drives to the ALXUM adapter.
Connection diagram for various drive types. The adapter offers compatibility with 2.5"/3.5" IDE, SATA HDD & SSD, DVD-ROM, and CD-ROM Hard Drive Disks. It connects to a laptop or PC via USB. Features include a Power Switch (ON/OFF), 3.5" IDE Cable, 3.5" IDE Connector, 3.5" & 2.5" SATA HDD & SSD & DVD-ROM & CD-ROM Connector, and 2.5" IDE Connector.
Close-up view of the ALXUM adapter showing ports: SATA 2.5/3.5, 2.5 inch IDE, 3.5 inch IDE, 4Pin Power, Micro USB, DC 12V, ON/OFF Switch.
Detailed view of the adapter's ports and switches.
Steps:
  1. Ensure the adapter's power switch is in the OFF position.
  2. Connect your 2.5" or 3.5" SATA HDD/SSD to the SATA port on the adapter.
  3. For 2.5" IDE drives, connect directly to the 2.5" IDE connector.
  4. For 3.5" IDE drives, connect to the 3.5" IDE connector and ensure the 4PIN Power Cable is connected to the drive and the adapter. If connecting two IDE drives simultaneously, set the 3.5'' IDE drive as the slave drive based on its manufacturer's instructions.
  5. Connect the USB 3.0 cable from the adapter to your computer.
  6. Connect the 12V/2A Power Adapter to the DC 12V port on the adapter and plug it into a power outlet. This is crucial for 3.5-inch HDD/SSD stability.
  7. Switch the adapter's power to ON.
Video demonstrating the connection of multiple hard drives (IDE and SATA) to the ALXUM adapter and data transfer process.

Operating Instructions

Data Transfer

Once connected and powered on, your operating system should recognize the connected drives as external storage. You can then drag and drop files, copy, or transfer data between your computer and the drives, or between the connected drives themselves. The USB 3.0 interface provides SuperSpeed data transfer rates.

Screenshot of a computer desktop showing multiple hard drives connected via the ALXUM adapter, with file transfer progress windows open.
Demonstration of transferring a 1GB file in seconds, highlighting fast data transfer speeds.

One Touch Backup (OTB) Function

The adapter features a One Touch Backup (OTB) function for convenient data backup and restore. Note: The OTB function is not compatible with Linux and Mac OS. It is only supported on Windows systems.

Using OTB:
  1. Install the AI-OTB driver from the provided CD or download it from the manufacturer's website.
  2. Launch the AI-OTB software.
  3. Configure your backup settings within the software, including selecting the source and destination folders for backup.
  4. Press the 'BACK UP' button on the ALXUM adapter to initiate the backup process.
Screenshot of the AI-OTB software interface showing installation steps and backup options.
Screenshots illustrating the installation and configuration of the AI-OTB driver for data backup and restore.

Specifications

FeatureDetail
Brand NameALXUM
Model NumberY-3322A
TypeSATA Cables
PackageYes
OriginMainland China
CertificationCE
Power Supply Specification12V/2A Power Adapter
InterfaceUSB 3.0 (backward compatible with USB 2.0/1.1)
Data Transfer RateUp to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1)
Supported Drives2.5"/3.5" SATA HDD/SSD, 2.5"/3.5" IDE HDD, CD-ROM, CD-RW, COMBO, DVD-ROM, DVD-RW, DVD+RW, DVD-RAM Optical Drives
Max CapacityUp to 18TB
Simultaneous ConnectionsUp to 3 hard drives (2 IDE, 1 SATA)
Diagram showing the dimensions of the ALXUM USB 3.0 to SATA IDE Adapter.
Dimensions of the adapter: 96mm/3.77in (length), 70mm/2.75in (width), 16mm/0.62in (height).

Troubleshooting

  • Drive Not Detected: Ensure all cables (USB, power, data) are securely connected. For 3.5-inch drives, verify the 12V/2A power adapter is correctly plugged in and the adapter's power switch is ON.
  • IDE Drive Issues: If connecting two IDE drives, ensure the 3.5'' IDE drive is set as the slave drive according to its manufacturer's instructions.
  • OTB Function Not Working: The One Touch Backup (OTB) function is only compatible with Windows operating systems and requires the AI-OTB driver to be installed. It does not work on Linux or Mac OS.
  • "USB mass storage device" Driver Issue: If your computer prompts for a driver installation, it indicates your OS lacks the necessary "USB mass storage device" driver. Ensure this driver is installed on your system.
  • Optical Drive Compatibility: Note that Windows 10 and Mac OS systems may not be fully compatible with all DVD drives when using this adapter.

User Tips

  • Always ensure proper power supply, especially for 3.5-inch drives, to prevent data corruption or drive damage.
  • When dealing with older IDE drives, correctly setting master/slave jumpers can be crucial for detection, especially when connecting multiple IDE devices.
  • For data recovery from a formatted drive, this adapter can provide the physical connection, but specialized data recovery software will be required. The adapter itself does not perform data recovery.

Maintenance

Keep the adapter and cables clean and free from dust. Store in a cool, dry place when not in use. Avoid exposing the device to extreme temperatures or humidity. Do not attempt to disassemble the unit, as this will void any potential warranty.

Warranty and Support

For technical support, warranty claims, or further assistance, please contact ALXUM customer service. Refer to your purchase documentation for specific warranty terms and contact information.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.