1. Product Overview
The Dooya DC1650A is a single-channel wall switch receiver, and the DC1651A is a double-channel emitter remote control, both designed for controlling Dooya tubular motors. These devices provide convenient control over motorized blinds, curtains, or other applications using tubular motors.
Figure 1: Dooya DC1650A Single Channel Wall Switch
Figure 2: Dooya DC1651A Double Channel Wall Switch
2. Setup and Pairing
Follow these steps to pair your Dooya wall switch with a compatible tubular motor:
- Power On Motor: Ensure the tubular motor is connected to its power supply and turned on. The motor will typically make a sound and rotate slightly upon power-up.
- Initiate Pairing on Wall Switch: On the Dooya wall switch, simultaneously press and hold the 'Up' button and the 'Pause/Stop' button.
- Confirm Pairing Mode: While holding, press these two buttons twice. The motor should make another sound and rotate slightly, indicating it has entered pairing mode.
- Finalize Pairing: Release the buttons, then press the 'Up' button once more. The motor will rotate slightly again.
- Test Functionality: Pairing is now complete. Test the 'Up' and 'Down' buttons on the wall switch to ensure proper control of the motor.
Video 1: Pairing instructions for Dooya tubular motor with wall switch.
3. Operating Instructions
The wall switch provides intuitive control over your tubular motor:
- Up Button (<): Press to move the motor upwards (e.g., open blinds).
- Pause/Stop Button (||): Press to stop the motor at its current position.
- Down Button (>): Press to move the motor downwards (e.g., close blinds).
- Channel Selection (DC1651A only): The DC1651A double-channel emitter allows control of two separate motors or groups of motors. Refer to the specific motor's manual for channel assignment and switching procedures.
4. Maintenance
4.1. Battery Replacement
The wall switch requires batteries for operation. If the switch becomes unresponsive, the batteries may need replacement. Please note that batteries are not included with the product and must be purchased separately from a local market.
4.2. Cleaning
To clean the wall switch, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components.
5. Troubleshooting
- Wall Switch Not Responding:
- Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure the wall switch is within the operating range of the tubular motor.
- Attempt to re-pair the wall switch with the motor following the 'Setup and Pairing' instructions.
- Motor Not Responding:
- Verify that the motor is properly connected to its power source and receiving power.
- Confirm that the wall switch is paired correctly with the motor.
- If using the DC1651A (double channel), ensure the correct channel is selected.
- Color Discrepancy: Product photos are taken of real products, but slight color variations may occur due to lighting conditions or different computer screen settings. This is normal and not a defect.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | Dooya DC1650A / DC1651A |
| Channels | DC1650A: Single Channel, DC1651A: Double Channel |
| Battery Included | No |
| Wattage | 0W (for the control unit) |
| Origin | Mainland China |
| Certification | CE |
| Package Dimensions (approx.) | 15cm (L) x 15cm (W) x 15cm (H) |
| Package Weight (approx.) | 0.3 kg |
7. User Tips
- Battery Sourcing: Due to shipping restrictions, batteries for the remote control are not included. Please purchase the required batteries from your local market.
- Optimal Placement: For best signal reception, ensure the wall switch is mounted in a location free from major obstructions that could interfere with the radio frequency signal to the motor.
8. Warranty and Support
This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.
For any technical support, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
