1. Introduction
Congratulations on your purchase of the ThermoPro TP829C Professional Remote Food Thermometer. This programmable radio frequency food thermometer allows you to remotely monitor the temperature of cooking food and the temperature inside your grill, oven, or smoker from anywhere in your home. Cook like a pro every time!
Video: Demonstrating the ThermoPro TP829C in use for cooking various meats.
2. Components
The ThermoPro TP829C package includes the following items:
- 1 x Receiver
- 1 x Transmitter
- 4 x Detachable, color-coated stainless steel probes with steel mesh cable
- 4 x Plastic Winders
- 4 x AAA Batteries
- 2 x Clips

Image: All components included in the ThermoPro TP829C package.
3. Setup
3.1. Installing Batteries
- Open the battery compartment of the receiver and insert two "AAA" batteries with correct polarity.
- Open the battery compartment of the transmitter and insert two "AAA" batteries with correct polarity.
3.2. Synchronize/Pair Transmitter and Receiver
The transmitter and receiver are pre-paired at the factory. Typically, you do NOT need to re-synchronize them. Simply plug in the probes, insert batteries, turn on both units, and wait a few seconds for temperatures to display.
If re-synchronization is needed, follow these steps:
- Insert two AAA batteries into the receiver. The signal icon on the display will flash.
- Insert two AAA batteries into the transmitter, and insert the stainless steel probes into the corresponding plugs. The LCD will show current probe temperatures.
- Press and hold the Power button on the receiver for 3 seconds to enter synchronization mode.
- Wait for a moment until the temperature reading shows on the receiver display. This indicates successful synchronization/pairing.
Note: Synchronization between the transmitter and receiver will not be lost when replacing batteries.
3.3. Placement Method
The TP829C offers multiple placement options for convenience:
- Tabletop Stand: Use the integrated stand to place the unit on a flat surface.
- Magnetic Back: Adsorb the unit onto a metal surface.
- Hanging Hole: Hang the unit on a hook.

Image: Various placement options for the ThermoPro TP829C units.
4. Operating Instructions
4.1. Receiver Features and Buttons
The receiver features a backlight, temperature alarm, and supports four color-coated steel stainless probes. It has a tabletop, magnet, and wall-mounted design.

Image: ThermoPro TP829C Receiver and Transmitter overview.
Receiver Buttons:
- Power Button (ن): Press to turn on/off the Receiver. Press and hold for 3 seconds to enter the Synchronization/Pair process.
- PROBE/TIMER: Press to rotate between Thermometer Probe 1, Probe 2, Probe 3, or Probe 4. Press and hold for 3 seconds to enter Timer mode.
- Backlight/°F/°C (💡/°F/°C): Press to turn on/off the backlight (auto-off after 15 seconds of inactivity). Press and hold for 3 seconds to switch between °F and °C.
- Up Arrow (▲): In thermometer mode, press to increase temperature setting. Press and hold for rapid scrolling. In timer mode, press to increase Hour, Minute, or Seconds setting. Press and hold for rapid scrolling.
- Down Arrow (▼): In thermometer mode, press to decrease temperature setting. Press and hold for rapid scrolling. In timer mode, press to decrease Hour, Minute, or Seconds setting. Press and hold for rapid scrolling.
- S./S./()/CLEAR: Press to turn ON/OFF the alarm in thermometer mode. When setting the timer, press to confirm Hours, Minutes, and Seconds. When the timer is set, press once to start/pause. Press and hold for three seconds to clear the timer setting.
- MEAT: In thermometer mode, press to select meat type: GPOUL (Ground Poultry), BBQ, PROG (Program - USER DEFINED TEMPERATURE), BEEF, VEAL, CHCKE (Chicken), PORK, POULT (Poultry), LAMB, FISH, HAM, and GBEEF (Ground Beef).
- TASTE/HI/LO: In thermometer mode, press to select meat doneness (RARE, MED RARE, MEDIUM, MEDIUM WELL, WELL DONE). In BBQ mode, press to display HI or LO BBQ temperature and confirm settings. In timer mode, press to select between Hour/Minute and Minute/Second timer.
Note: Press and hold the ▲ and ▼ buttons simultaneously to enable Button Press Beeps. The device has no key tone by default.
4.2. Transmitter Features and Buttons
The transmitter also features a backlight and supports four probes. It has a tabletop and wall-mounted design.
Transmitter Buttons:
- Power/°F/°C (ن/°F/°C): Press to turn on/off the Transmitter. Press and hold for 3 seconds to switch between °C and °F.
- Backlight (💡): Press to turn on/off the backlight (auto-off after 15 seconds of inactivity).
4.3. Auto Off Feature & Lost Connection Alert
If the receiver does not receive a signal from the transmitter, the temperature reading will display "---" and an alert will sound. The receiver will shut down after 30 minutes if the signal is not reconnected.
The transmitter will automatically shut down if the temperature of all 4 probes stays below 40°C for 2 hours.
4.4. Monitoring with 4 Probes
The TP829C is equipped with 4 color-coated meat probes, allowing you to monitor up to four different food items or sections of a large cut of meat simultaneously.

Image: Monitoring four different meat temperatures with the TP829C.
4.5. Setting Meat Temperatures (Preset & Custom)
The TP829C offers pre-programmed USDA recommended temperatures for various meats and doneness levels, as well as a customizable program mode.

Image: Preset meat types and doneness levels on the receiver display.
To use Preset Temperatures:
- Press the PROBE/TIMER button to select the desired probe (1-4).
- Press the MEAT button to cycle through preset meat types: GPOUL, BBQ, PROG, BEEF, VEAL, CHCKE, PORK, POULT, LAMB, FISH, HAM, GBEEF.
- Press the TASTE/HI/LO button to choose the doneness level (RARE, MED RARE, MEDIUM, MEDIUM WELL, WELL DONE) for the selected meat type.
- Once the current temperature reaches the preset target, the receiver will alarm. Press any button to stop.
To set Custom Temperatures (PROG mode):
- Press the PROBE/TIMER button to select the desired probe (1-4).
- Press the MEAT button until the LCD displays PROG.
- Use the ▲ or ▼ buttons to adjust your desired target temperature. Press and hold for rapid adjustment.
- Once the current temperature reaches your custom target, the receiver will alarm. Press any button to stop.
Fast Target Temperature Setting:
To quickly set all probes' target temperature to the current probe's setting, press and hold the MEAT and TASTE/HI/LO buttons simultaneously for 3 seconds. For example, if Probe 1 is set to BEEF MEDIUM 160°F, this action will set Probes 2, 3, and 4 to BEEF MEDIUM 160°F.
4.6. Setting and Monitoring BBQ Temperature
You can use any of the 4 probes to measure and monitor the ambient temperature inside your smoker, barbecue, or oven. Remember to clip the selected probe(s) to the rack.

Image: BBQ mode with HI/LOW temperature alarms.
- Press the PROBE/TIMER button to select the desired probe (1-4).
- Press the MEAT button until the LCD displays BBQ.
- Press the TASTE/HI/LO button to switch to the HI BBQ temperature setting. Use ▲ or ▼ to set your desired HI BBQ temperature (recommended range: 140°F - 572°F, default 250°F).
- Press TASTE/HI/LO again to confirm HI BBQ temperature and proceed to LO BBQ temperature setting.
- Use ▲ or ▼ to set your desired LO BBQ temperature (recommended range: 32°F - 554°F, default 225°F).
- Press TASTE/HI/LO again to confirm LO BBQ temperature.
- Press the S./S./()/CLEAR button to turn the alarm ON/OFF.
Note: The HI BBQ temperature cannot be set below the LO BBQ temperature. The LO BBQ temperature alarm activates only when the actual BBQ temperature goes above the set LO temperature.
4.7. Using the Timer Function
The TP829C includes a built-in timer that can count up or count down, with a maximum duration of 99 hours and 59 minutes. The timer and temperatures can be displayed simultaneously.

Image: Count-up and count-down timer functions.
To Set a Count Down Timer:
- Press and hold the PROBE/TIMER button for 3 seconds to switch to TIMER mode. The display will show 00:00 and a small timer icon.
- Press the TASTE/HI/LO button to select between Hour/Minute and Minute/Second timer.
- Use the ▲ or ▼ buttons to adjust the initial timer setting. Press and hold for rapid adjustment.
- Press the S./S./()/CLEAR button to confirm the setting.
- Press the S./S./()/CLEAR button again to start the timer. TIMER▼ will blink.
- To pause, press S./S./()/CLEAR. To clear, press and hold S./S./()/CLEAR.
- When the timer reaches 00:00, an alarm will sound for one minute. Press any button to stop.
Note: When the countdown timer goes below 1:00 hour, the display will automatically switch to minutes and seconds.
To Set a Count Up Timer:
- Press and hold the PROBE/TIMER button to switch to TIMER mode. The display will show 00:00 and a small timer icon.
- Press the S./S./()/CLEAR button to start counting up. TIMER▲ will blink.
- To pause, press S./S./()/CLEAR. To clear, press and hold S./S./()/CLEAR.
Note: When the count-up timer reaches 59 minutes and 59 seconds, it will automatically change to Hour:Minute display format.
5. Maintenance
5.1. Cleaning
- Always wear heat-resistant gloves to handle probe sensors or wires during or immediately after cooking. Do not touch with bare hands.
- Keep stainless steel probe sensors and wires away from children.
- Wash the metal probe tip with hot soapy water and dry thoroughly. Do not immerse the entire probe in water while cleaning.
- Wipe the transmitter and receiver with a damp cloth. Do not immerse either unit in water.
5.2. Cautions
- Do not expose the plugs of the stainless-steel probes or the probe sockets of the transmitter to water or any liquid. This can cause a bad connection and faulty readings.
- Do not expose the receiver or transmitter to direct heat.
- Do not use stainless steel probes in a microwave oven.
- The probe thermometer registers temperatures from 14°F (-10°C) to 572°F (300°C). Do not use the stainless probe sensor above 572°F (300°C), as this will deteriorate the wire.
- Not intended for use by persons aged 12 and under.
6. Troubleshooting
6.1. Helpful Hints
- If the receiver and/or transmitter do not show temperature readings, wait for the probe to reach room temperature. Push the probe jacks firmly into the transmitter and twist them back and forth to ensure good contact. If the problem persists, the internal probe wire may be damaged by moisture or heat.
- If the displayed temperature seems too high or increases too quickly, ensure the probe tip is not poking through the food. Reposition the probe tip in the center of the thickest part of the food, avoiding bone or heavy fat areas.
7. Specifications
| Feature | Specification |
|---|---|
| Remote Range | 1000FT (300m) |
| Probe Temperature Range | 14°F to 572°F (-10°C to 300°C) |
| Temperature Accuracy | ±1.8°F (±1.0°C) |
| Display Type | DIGITAL |
| Display Size (Receiver) | 8.6 CM wide screen |
| Display Size (Transmitter) | 5.8 CM wide screen |
| Power Type | AAA Battery (2 for receiver, 2 for transmitter) |
| Cable Length | 1m |
| Timer | Countdown/Up 99Hrs 59mins |
| Temperature Unit | °F / °C |
| Waterproof Rating | IPX4 (Protects from splashing water, do not submerge) |
| Certification | CE |

Image: Product dimensions of the receiver and transmitter.

Image: High accuracy and heat resistance features of the probes.

Image: Comparison of wireless range, highlighting the 300m range of the TP829C.
8. User Tips
- Test Accuracy: Before first use, you can test the accuracy of the probes by placing them in ice water. They should read approximately 1°C / 33°F.
- Enjoy Freedom: The wireless range allows you to monitor your cooking from a distance, so you don't have to stay in the kitchen or by the grill.
- Versatile Placement: Utilize the tabletop stand, magnetic back, or hanging hole for convenient placement of your receiver and transmitter.
- Multi-Probe Monitoring: Take advantage of the four probes to monitor different cuts of meat or different areas of a large roast simultaneously for perfect results.
9. Warranty & Support
9.1. Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year from the date of purchase. Should any repairs or servicing under this warranty be required, contact Customer Service for instructions on how to pack and ship the product to ThermoPro.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
9.2. Customer Service
- Call or Text: 1-877-515-7797 (USA & Canada only)
- Email: service@buythermopro.com
- Hours: Weekdays 8:00 AM - 8:00 PM EST (USA & Canada only)
9.3. FCC Compliance Information to User
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
9.4. Declaration of Conformity
Hereby, the manufacturer declares that this product complies with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of-conformity/
9.5. Disposal
Meaning of the "Dustbin" Symbol: Protect our environment: do not dispose of electrical equipment in domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of re-utilization of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authority.
CAUTION: Batteries/rechargeable batteries must not be disposed of with household waste! The batteries must be removed from the appliance. Take spent batteries to the appropriate collection point or to a dealer. Your town or local authority can provide information about public collection points.
This symbol can be found on batteries/rechargeable batteries which contain hazardous substances:
- Pb = contains lead
- Cd = contains cadmium
- Hg = contains mercury
- Li = contains lithium