ASMTLED GS1903 Pixel LED Strip

Contents

GS1903 Pixel LED Strip User Manual

Model: GS1903 Pixel LED Strip

Brand: ASMTLED

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ASMTLED GS1903 Pixel LED Strip. Please read this manual carefully before use to ensure proper functionality and safety.

Video: Demonstrating the dynamic color changes and effects of the GS1903 Pixel LED Strip.

2. Important Notes

  • This product includes only the LED Strip. Power supply and LED controller are NOT included and must be purchased separately.
  • It is normal for the LED strip to have solder points every 0.5 meters. This does not affect performance.
  • The 12V LED Strip is designed to operate exclusively with a 12V DC power supply. Using an incorrect voltage will damage the strip.

3. Specifications

FeatureDetail
LED Source5050SMD RGB External GS1903 chipset
IC TypeGS1903 (compatible with WS2811)
Working Input Voltage12V DC
Output Power0.2W/LED
Drive ModeConstant Voltage
LED Quantity60 LEDs/Meter (3 LEDs are separately controlled)
IC Quantity20 ICs/Meter (1 IC drives 3 LED chips)
Pixels20 Pixels/Meter
Grey Scale256
ColorRGB
View Angle120°
Working Temperature-20°C to 60°C
PCB ColorWhite PCB
Waterproof RatingIP30 (Non-waterproof)
PCB Width6mm
Power Consumption60 LEDs/meter - max 14W/Meter
Length5 meters (per roll)
CertificationCE, RoHS
Average Life1,000,000 hours
LEDs Compared diagram, illustrating dimensions and LED density.

Image: LEDs Compared diagram, illustrating dimensions (6mm width, 50mm segment length) and LED density (60 LEDs/m) for the 12V DC strip.

4. Setup and Installation

Follow these steps for safe and effective installation of your LED strip:

  1. Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. Remove any dust, oil, or moisture.
  2. Measure and Cut (Optional): The LED strip can be cut to your desired length. Look for the designated cutting marks (usually indicated by a scissor icon or copper pads) every 0.5 meters. Cut only at these marks to avoid damaging the circuit.
    Detailed view of the LED strip showing 5050SMD RGB Lamp, cut points, GS1903 IC, and safe resistor.

    Image: Detailed view of the LED strip highlighting cut points, 5050SMD RGB Lamp, GS1903 IC, and safe resistor.

  3. Wiring Connection: Connect the LED strip to a compatible 12V DC power supply and an appropriate LED controller (not included). Ensure correct polarity (+ to +, - to -). The thickness of the power cord should be chosen based on the actual maximum current, product power, and wiring length (not exceeding 5 meters) to minimize voltage drop.
    Distribution Wiring Diagram for the LED strip.

    Image: Distribution Wiring Diagram showing connections between AC110-220V power, DC12V power supply, LED controller, and multiple 5-meter LED strip rolls. Note the data (DATA) and ground (GND) connections for addressable control.

  4. Mounting: Peel off the adhesive backing and firmly press the LED strip onto the prepared surface. For long-term or outdoor installations (though this model is IP30, non-waterproof, so indoor use is recommended unless protected), consider additional mounting clips or channels.
  5. Power On: Once all connections are secure, connect the power supply to the main power outlet.

5. Operation

The GS1903 Pixel LED Strip is an addressable "dream color" strip, meaning each group of 3 LEDs can be controlled independently by a compatible LED controller (e.g., WS2811 compatible controllers). This allows for a wide range of dynamic lighting effects.

  • Controller Compatibility: Use a controller designed for GS1903 or WS2811 ICs to unlock the full potential of the strip's addressable features.
  • Dynamic Effects: With a suitable controller, you can achieve various effects such as full-color water flow, chasing, scanning, and custom animations.
  • Brightness Control: Adjust the brightness levels through your LED controller.
  • Color Selection: Select from a vast spectrum of RGB colors and create custom color palettes.
LED strip displaying various vibrant colors.

Image: The LED strip showcasing its ability to display various vibrant colors simultaneously.

6. Maintenance

To ensure the longevity and optimal performance of your LED strip, follow these maintenance guidelines:

  • Cleaning: Gently wipe the surface of the LED strip with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or excessive moisture, especially since the strip is IP30 (non-waterproof).
  • Inspection: Periodically check for any loose connections, damaged sections, or signs of overheating. Address any issues promptly.
  • Environment: Install the strip in a dry environment with good ventilation. Avoid direct exposure to sunlight, extreme temperatures, or high humidity.

7. Troubleshooting

If you encounter issues with your LED strip, refer to the following common problems and solutions:

ProblemPossible CauseSolution
LED strip does not light upNo power, incorrect voltage, loose connection, faulty power supply/controller.Check power supply connection and output. Ensure 12V DC. Verify all wiring connections are secure. Test with a different power supply/controller if available.
Partial section of the strip is off or flickeringDamaged LED segment, loose connection, voltage drop.Inspect the affected section for physical damage. Check solder points. Ensure power cord thickness is adequate for the length to prevent voltage drop.
Colors are incorrect or inconsistentController settings, data line issue.Verify controller settings match the GS1903 IC type. Check the data line connection between the controller and the strip.

8. Applications

The ASMTLED GS1903 Pixel LED Strip is versatile and suitable for a wide range of decorative and functional lighting applications:

  • Automobile and bicycle decoration, border or contour lighting
  • Home decoration (e.g., living rooms, bedrooms, kitchens, game rooms)
  • Hotels, clubs, shopping malls
  • Architectural decorative lighting, boutique atmosphere lighting
  • Backlighting, concealed lighting, channel letter lighting
  • Emergency & security lighting, advertisement sign lighting
  • Decorative lights for holidays, events, and exhibitions
Examples of LED strip applications in home and commercial settings.

Image: Various application examples including living rooms, bedrooms, kitchens, TV backlighting, and game rooms, showcasing the strip's versatility.

9. User Tips

  • For longer runs or multiple strips, consider using a power injector to prevent significant voltage drop and ensure consistent brightness along the entire length.
  • Always test the LED strip and controller before final installation to confirm all components are working correctly.
  • When planning your installation, account for the non-waterproof (IP30) rating and ensure the strip is protected from moisture if used in potentially damp areas.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's official store or contact their customer service directly. Keep your purchase receipt as proof of purchase.

PDF User Manual: A detailed user manual in PDF format can be found here.

© 2023 ASMTLED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.